Click any of the topics listed below for help with that particular topic. X(1) resize(1) xset(1) xterm(1) dtterm [-options] The dtterm client provides runtime support of legacy applications written for ANSI X3.64-1979 and ISO 6429:1992(E) conformant character terminals such as the DEC VT220. The dtterm terminal emulator accepts all of the standard X Toolkit command line options along with additional options all of which are listed below (if the option begins with a `+' instead of a `-', the option is restored to its default value): -132 Normally the DECCOLM escape sequence that switches between 80 and 132 column mode is ignored. This option causes the DECCOLM escape sequence to be recognized, and the dtterm window will resize appropriately. c132 Associated resource: c132. +132 This option causes the DECCOLM escape sequence to be ignored. This is the default behavior. c132 Associated resource: c132. -aw This option indicates that auto-wraparound should be allowed. This allows the cursor to automatically wrap to the beginning of the next line when it is at the right-most position of a line and text is output. This is the default behavior. Associated resource: autoWrap. autoWrap +aw This option indicates that auto-wraparound should not be allowed. Associated resource: autoWrap. autoWrap -background background_color This option specifies the background of the terminal window as well as the default background used for the scroll bar and the X11 pointer cursor. Under CDE, this option defaults to the primary colorset select pixel or background pixel(see -bs. Without CDE, this option defaults to *background/*Background with an ultimate fallback color of black. background_color describes the background color to use. background Associated resource: background -bd border_color This option specifies the border color for all windows. The shell widget's border may not be visible when reparenting window managers such as dtwm(1X) and mwm(1X) are used. The default color is black. border_color describes the border color to use. borderColor Associated resource: borderColor. -bg background_color This option is identical to -background. background_color describes the background color to use. background Associated resource: background. -bordercolor border_color This option is identical to -bd above. border_color Describes the border color to use borderColor Associated resource: borderColor. -borderwidth border_width This option specifies the border width of the shell widget's window. This value may be overridden by reparenting window managers such as dtwm(1X) and mwm(1X). The default is 0. border_width Specifies the width of the window border in pixels. borderwidth Associated resource: borderWidth. -bs This option specifies that the terminal window should use the Motif select color instead of the background color for the terminal window's background color. This is the default behavior. backgroundIsSelect Associated resource: backgroundIsSelect. +bs This option specifies that the terminal window should not use the Motif select color instead of the background color for the terminal window's background color. Associated resource: backgroundIsSelect. -bw border_width This option is identical to -borderwidth above. Associated resource: borderWidth. -C This option specifies that output directed at /dev/console should be directed instead to the terminal window. It is provided as a way to prevent output that would normally be displayed on the ITE from overwriting the X server's display. It is not provided as a general mechanism to direct the output from an arbitrary system's /dev/console to an arbitrary X server. Note that you must have ownership of and read/write access to /dev/console for this option to work. -display display_name This option specifies the X11 display server to be used by dtterm. This defaults to the value in the $DISPLAY environment variable. display_name specifies the X11 server to connect to. display -e program_argument ... This option specifies an executable program to be invoked as a subprocess when dtterm is started. This option must be the last option on the command line. program_argument ... specifies the program and command line arguments to execute. -fb fontset This option specifies an XFontSet to be used when displaying bold terminal text. It should be specified as a Motif XmFontList. Only character or mono spaced fonts are supported. The behavior when using proportional fonts is undefined. A default bold font will be generated based on the XLFD name of the userFont. If that font is not available, bold text will be generated by overstriking (with a one pixel offset) the userFont. fontset specifies the bold terminal XFontSet to use. Associated resource: userFont. -fg foreground_color This option specifies the foreground color of the terminal window as well as the default foreground color used for the scroll bar and the for the X11 pointer cursor. Under CDE, this resource will default to the primary color set foreground pixel. Without CDE, this resource will default to *foreground or *Foreground with an ultimate fallback color of white. foreground_color specifies the foreground color to use. foreground Associated resource: foreground. -fn fontset This option specifies an XFontSet to be used when displaying terminal text. It should be specified as a Motif XmFontList. Only character or mono spaced fonts are supported. The behavior when using proportional fonts is undefined. This font will not be used to display non-terminal text (menu bar, popup menus, dialogs, etc.). The default is to use the XmNtextFontList value of the parent bulletin board (see XmBulletinBoard(3X)) in the same manner as the XmText widget. fontset Specifies the terminal XFontSet to use. Associated resource: userFont. -font fontset This option is identical to -fn above. fontset Specifies the terminal XFontSet to use. Associated resource: userFont. -foreground foreground This option is identical to -fg above. foreground Specifies the foreground color to use. foreground Associated resource: foreground. -geometry geometry_string This option specifies the preferred size and position of the terminal window. The default size is 24 lines of 80 characters each. There is no default position. geometry Specifies the terminal geometry to use. geometry Associated resource: geometry. -help Displays a message summarizing the usage of dtterm. help -iconic This option specifies that the terminal emulator should initially be placed on the display iconified. iconic Associated resource: iconic. +iconic This option specifies that the terminal emulator should initially be placed on the display as a normal window. This is the default behavior. Associated resource: iconic. -j This option specifies that jump scrolling should be used. Under jump scrolling, the screen may be scrolled more than one line at a time. This provides for faster screen updates when multiple lines of text are being sent to the terminal. The maximum number of lines that may be jump scrolled is limited to the number of lines in the terminal window. It is guaranteed that all lines will be displayed. This is the default behavior. jumpScroll Associated resource: jumpScroll. +j This option specifies that jump scrolling should not be used. For a description of jump scrolling, see -j above. Associated resource: jumpScroll. -kshMode This option specifies that ksh mode should be enabled. Under ksh mode, a key pressed with the extend modifier bit set will generate an escape character followed by the character generated by the un-extended keystroke. This option is provided for use with emacs and the emacs command line editor mode of ksh(1) or ied(1). It conflicts with the normal use of the meta key for generating extended single byte characters, and for generating multi-byte Asian characters. kshMode Associated resource: kshMode. +kshMode This option specifies that the ksh mode should not be enabled. This is the default behavior. Associated resource: kshMode. -l This option enables output logging. When logging is enabled, all output received from the subprocess is logged either to a file or to a command pipeline (as specified via the -lf option below). Since the data is being logged directly from the subprocess, it includes all escape characters and carriage return/newline pairs sent by the terminal line discipline. Output may be enabled and disabled via escape sequences. logging Associated resource: logging. +l This option disables output logging. For a description of output logging, see -l above. This option is the default. logging Associated resource: logging. -lf file_name This option specifies the name of the file to which the output log described above is written. If file_name begins with a pipe symbol (|), the rest of the string is assumed to be a command to be used as the endpoint of a pipe. The default filename is DttermLogXXXXX (where XXXXX is the process id of dtterm) and is created in the directory from which dtterm was started. If the last five characters are "XXXXX," they are replaced by the process ID. file_name specifies the log file name to use. logFile Associated resource: logFile. -ls This option indicates that the shell that is started should be a login shell (i.e. the first character of argv[0] will be a dash, indicating to the shell that it should read the system's profile and the user's $HOME/.profile (for ksh and sh) or the system's csh.login and the user's $HOME.login (for csh). loginShell Associated resource: loginShell. +ls This option specifies that a normal (non-login) shell should be started. This is the default behavior. loginShell Associated resource: loginShell. -map This option indicates that dtterm should map (de-iconify) itself upon subprocess output if it is unmapped (iconified). An initial period of time during which dtterm will not map itself upon subprocess output may be specified via the mapOnOutputDelay resource. mapOnOutput Associated resource: mapOnOutput. +map This option specifies that there should be no special mapping behavior. This is the default behavior. mapOnOutput Associated resource: mapOnOutput. -mb This option indicates that dtterm should ring a margin bell when the user types near the right margin. The actual distance involved is specified by the -nb option. marginBell Associated resource: marginBell. +mb This option indicates that margin bell should not be rung when the user types near the right margin. This is the default. marginBell Associated resource: marginBell. -ms pointer_color This option specifies the foreground color to use for the terminal window's (X11) pointer cursor. The default is to use the terminal window's foreground color. See foreground above. pointer_color specifies the pointer foreground color to use. Associated resource: pointerColor. -name prog_name This option specifies the X11 name of the dtterm window. prog_name the name to use. name -nb number This option specifies the number of characters from the right margin at which the margin bell will ring, if enabled. The default is 10. nMarginBell Associated resource: nMarginBell. -r This option causes the dtterm window to be displayed with the foreground and background colors reversed. This is identical to the -r and -reverse options. +r This option causes the dtterm window to be displayed with the normal foreground and background colors. This is the default, and is also identical to the +rv option.. -reverse This option causes the dtterm window to be displayed with the foreground and background colors reversed. This is identical to the -r and -rv options. -rv This option causes the dtterm window to be displayed with the foreground and background colors reversed. This is identical to choosing Options | Global Options, and then changing the "windowBackground" options menu to "Inverse." A dtterm window started with this option has the "Window Background" options menu set to "Inverse." See "Global Options". +rv This option causes the dtterm window to be displayed with the normal foreground and background colors. This is the default. -rw This option specifies that reverse-wraparound should be enabled. reverseWrap Associated resource: reverseWrap. +rw This option indicates that reverse-wraparound should not be enabled. This is the default. reverseWrap Associated resource: reverseWrap. -Sccn This option specifies that the terminal emulator should be run against a pre-opened pty or STREAMS device. This option is provided for use where the pty or STREAMS device's slave name is of the form tty?? (i.e., exactly two characters following the tty). This option is intended for use when dtterm is invoked programmatically from another application. cc specifies the last two characters of the pty or STREAMS device's slave name, where the slave name is of the form tty??. This value is ignored, but must be exactly two characters in length. n specifies the number of the file descriptor that corresponds to the pty or STREAMS device's already-opened master side. -Sc.n This option is identical to -Sccn above, but is provided for systems with a larger pty name space. c specifies the last component of the pty slave name. This values is ignored and may be empty. n specifies the number of the file descriptor that corresponds to the pty's already-opened master side. -sb This option indicates that a scrollbar should be displayed. This is the default. scrollBar Associated resource: scrollBar. +sb This option indicates that a scrollbar should not be displayed. scrollBar Associated resource: scrollBar. -sf This option indicates that Sun Function Key escape codes should be generated for function keys instead of standard VT220 escape sequences. sunFunctionKeys Associated resource: sunFunctionKeys. +sf This option indicates that the standard escape sequences should be generated for function keys instead of the Sun Function Key escape codes. This is the default behavior. sunFunctionKeys Associated resource: sunFunctionKeys. -sl screens[s|l] This option specifies the number of lines in the terminal buffer beyond the length of the window. The option value consists of a number followed by an optional suffix. If no suffix is included, or the suffix is "l" (ell), the total length of the terminal buffer will be screens plus the length of the terminal window. If the suffix is "s" (ess), the total length of the terminal buffer will be (screens plus one) times the length of the terminal window. dtterm will try to maintain the same buffer-to-window ratio when the window is resized larger. The default is "4s." screens specifies the number of screens or lines to save. saveLines Associated resource: saveLines. -ti term_id This option supplies the name used to select the correct response to terminal ID queries. Valid values are vt100, vt101, vt102, and vt220. The default is vt220. term_id specifies the terminal ID to use. -title title_string This option specifies the window title. If the -e option is used, the default will be the last component of the program's path. If the -e option is not used, the default will be the last component of the name used to execute dtterm (i.e., argv[0]). title_string specifies the title to use. title Associated resource: title. -tm term_modes This option specifies a string containing terminal-setting keywords and the characters to which they may be bound. Allowable keywords include intr, quit, erase, kill, eof, eol, swtch, start, stop, brk, susp, dsusp, rprnt, flush, weras, and lnext. Keywords that do not apply to a specific architecture will be correctly parsed and ignored. Control characters may be specified as ^ followed by char (e.g. ^c or ^u), and ^? may be used to indicate delete. This is useful for overridding the default terminal settings without having to do an stty(1) every time a terminal process is started. The default is NULL. term_modes specifies the terminal mode string. ttyModes Associated resource: ttyModes. -tn term_name This option specifies a name to set the $TERM environment variable to. The default is "vt220". term_name specifies the terminal name to use. termName Associated resource: termName. -usage Prints a usage message on the screen. -vb This option indicates that a visual bell is preferred over an audible one. Instead of ringing the terminal bell whenever a Control-G is received, the window will be flashed. visualBell Associated resource: visualBell. +vb This option indicates that an audio bell is preferred over a visual one. This is the default behavior. visualBell Associated resource: visualBell. -w border_width This option is identical to -borderwidth above. border_width specifies the width of the window border in pixels. -xrm resource_string This option allows X11 Resource Manager-style resources to be specified on the command line. resource_string specifies an X11 resource string. allowSendEvents This resource specifies that the terminal emulator should allow synthetic events (generated and sent by another application). Enabling this resource opens up a possible security hole. The default is False. appCursorDefault If True, the cursor keys are initially in application mode. If False, they are initially in cursor mode. The default is False. appKeypadDefault If True, the keypad keys are initially in application mode. If False, they are initially in numeric mode. The default is False. autoWrap This resource specifies whether or not auto-wraparound is initially enabled. The default is True. background This resource specifies the background color of the terminal window as well as the default background color used for the scrollbar. Under CDE, this resource defaults to either the primary color set select pixel or the primary color set background pixe (see backgroundIsSelect). The default is the primary color set background pixel. Without CDE, this resource defaults to black. backgroundIsSelect When True, this resource specifies that the terminal window should use the Motif select color instead of the background color for the terminal window's background color. The default is False. blinkRate This resource specifies the number of milliseconds the cursor is in the "on" and "off" states while blinking. A value of 250 will blink the cursor two times per second. A value of 0 will turn blinking off. The default is 250. borderColor This resource defines the border color for the window. The window border may not be visible when reparenting window managers such as dtwm and mwm are used. The default is "black". borderWidth This resource specifies the border width of the shell widget's window. This value may be overridden by reparenting window managers such as dtwm and mwm. The default is 0. c132 This resource specifies whether or not the DECCOLM escape sequence that switches to window with between 80 and 132 columns should be honored. The default is False. charCursorStyle This resource specifies the shape of the text cursor. A value of char_cursor_box specifies a cursor with the width and height of the base font's bounding box. A value of char_cursor_bar specifies a cursor with the width of the base font's bounding box, a height of two pixels, and drawn with it's top on the baseline. The default is char_cursor_box. consoleMode This resource specifies that output directed at /dev/console should be directed instead to the terminal window. It is provided as a way to prevent output that would normally be displayed on the ITE from overwriting the X server's display. It is not provided as a general mechanism to direct the output from an arbitrary system's /dev/console to an arbitrary X server. Note that you must have ownership of and read/write access to /dev/console for this option to work. The default is False. foreground This resource specifies the foreground color of the terminal window as well as the default foreground color used for the scrollbar and the color used for the pointer cursor. Under CDE, this resource will default to the primary colorset foreground. Otherwise, it defaults to "white". geometry This resource specifies the preferred size and position of the terminal window. The default size is 24 lines of 80 characters each. There is no default position. iconGeometry This resource specifies the preferred position of the terminal emulator's icon. Window managers may ignore this value. There is no default. iconic If true, this resource specifies that the terminal emulator should initially be placed on the display iconified. Window managers (including dtwm and mwm may ignore this value. The default is False. iconicName This resource specifies the name for the icon. If the -e option is used, the default will be the last component of the program's path. If the -e option is not used, the default will be the base name of the name used to execute dtterm (i.e., argv[0]). jumpScroll This resource specifies that jump scrolling should be used. Under jump scrolling, the screen may be scrolled more than one line at a time. This provides for faster screen updates when multiple lines of text are being sent to the terminal. The maximum number of lines that may be jump scrolled is limited to the number of lines in the display. It is guaranteed that all lines will be displayed. The default is True. kshMode This resource specifies that ksh mode should be enabled. Under ksh mode, a key pressed with the extend modifier bit set will generate an escape character followed by the character generated by the un-extended keystroke. This option is provided for use with emacs and emacs command line editor mode of ksh(1) or ied(1). It conflicts with the normal use of the meta key for generating extended single byte characters and for generating multi-byte Asian characters. The default is False. logFile This resource specifies the name of the file to which the output log described below is written. If the filename begins with a pipe symbol (|), the rest of the string is assumed to be a command to be used as the endpoint of a pipe. The default filename is DttermLogXXXXX (where XXXXX is a unique character string) and is created in the directory from which the subprocess was started. If the last five characters are "XXXXX," they are replaced by a unique character string. logging This resource enables output logging. When logging is enabled, all output received from the subprocess is logged either to a file or to a command pipeline (as specified via the logFile option above). Since the data is being logged directly from the subprocess, it includes all escape characters and carriage return/newline pairs sent by the terminal line discipline. Output may be enabled and disabled via escape sequences. The default is False. logInhibit This resource specifies that device and file logging should be inhibited. The default is False. loginShell This resource specifies that the shell that is started should be a login shell (i.e. the first character of argv[0] will be a dash, indicating to the shell that it should read the system's profile and the user's $HOME/.profile (for ksh and sh) or the system's csh.login and the user's $HOME/.login (for csh). The default is False. mapOnOutput This resource indicates that the terminal emulator should map (de-iconify) itself upon subprocess output if it is unmapped (iconified). An initial period of time during which it will not map itself upon subprocess output may be specified via the mapOnOutputDelay resource (see below). The default is False. mapOnOutputDelay This resource specifies the number of seconds after start-up that dtterm will not honor the mapOnOutput resource (see above). This allows for initial output (e.g., shell prompts) to be sent to the terminal without auto mapping the window. The default is 0 (no delay) marginBell Specifies whether or not the bell should be run when the user types near the right margin. The default is False. menuBar This resources specifies that a pulldown menu should be displayed. The default is True. menuPopup This resources specifies that a popup menu should be enabled. The default is True. nMarginBell Specifies the number of characters from the right margin at which the margin bell should be rung, when enabled. The default is 10. pointerBlank This resource specifies that the pointer cursor should be put into blanking mode. In this mode, the cursor will turn on when the pointer is moved, and will be blanked either after a selectable number of seconds or after keyboard input has occurred. The delay is set via the pointerBlankDelay resource (see below). The default is False. pointerBlankDelay This resource defines the number of seconds to wait before blanking the pointer cursor after the pointer has been moved. A value of 0 invokes pointer blanking only on keyboard input. The default is 2 seconds. pointerColor This resource specifies the foreground color to use for the terminal window's pointer (X11) cursor. The default is to use the terminal window's foreground color. See foreground above. pointerColorBackground This resource specifies the background color to use for the terminal windows pointer (X11) cursor. The default is to use the terminal windows background color See background above. pointerShape This resource specifies the X cursor font character to use as the pointer cursor. It should be specified as a string from the include file <X11/cursorfont.h> with the leading XC_ removed. The default is xterm. reverseVideo This resource specifies whether or not reverse video should be used. The default is False. reverseWrap This resource specifies whether or not reverse-wraparound should be enabled. The default is False. saveLines This resource specifies the number of lines in the terminal buffer beyond length of the window. The value value consists of a number followed by an optional suffix. If no suffix is included, or the suffix is "l" (ell), the total length of the terminal buffer will be screens plus the length of the terminal window. If the suffix is "s" (ess), the total length of the terminal buffer will be (screens plus one) times the length of the terminal window. dtterm will try to maintain the same buffer-to-window ratio when the window is resized larger. The default is "4s." scrollBar This resource specifies whether or not the scrollbar should be visible. The default is True. sunFunctionKeys Specifies whether or not Sun Function Key escape codes should be generated for function keys instead of standard VT220 escape sequences. The default is False. termId This resource supplies the name used to select the correct response to terminal ID queries. Valid values are vt100, vt101, vt102, and vt220. The default is vt220. termName This resource defines the name for the $TERM environment variable. The default is vt220. title This resource specifies the window title. If the -e option is used, the default will be the last component of the program's path. If the -e option is not used, the default will be the last component of the name used to execute dtterm (i.e., argv[0]). ttyModes This resource specifies a string containing terminal-setting keywords and the characters to which they may be bound. Allowable keywords include: intr, quit, erase, kill, eof, eol, swtch, start, stop, brk, susp, dsusp, rprnt, flush, weras, and Inext. Keywords that do not apply to a specific architecture will be correctly parsed and ignored. Control characters may be specified as ^followed by char (e.g. ^c or ^u), and ^? may be used to indicate delete. This is very useful for overriding the default terminal settings without having to do an stty every time a terminal process is started. The default is NULL. userBoldFont This resource specifies an XFontSet to be used when displaying bold terminal text. It should be specified as a Motif XmFontList. Only character or mono spaced fonts are supported. The behavior when using proportional fonts is undefined. A default bold font will be generated based on the XLFD name of the userFont. If that font is not available, bold text will be generated by overstriking (with a one pixel offset) the userFont. userFont This resource specifies an XFontSet to be used when displaying terminal text. It should be specified as a Motif XmFontList. Only character or mono spaced fonts are supported. The behavior when using proportional fonts is undefined. This font will not be used to display non-terminal text (menu bar, popup menu, dialog, etc.). The default is to use the XmNtextFontList value of the parent bulletin board (see XmBulletinBoard(3X)) in the same manner as the XmText widget. visualBell This resource specifies that a visual bell is preferred over an audible one. Instead of ringing the terminal bell whenever a CTRL-G is received, the windows will be flashed. The default is False. dtterm allows you to select regions of text. Selection is based on the model specified in the Inter-Client Communication Conventions Manual (ICCCM). dtterm supports primary selection only. You can copy or paste selected text using primary transfer. Input is treated as keyboard input, and is inserted at the cursor. The select/insert operations and their default assignments are described below. select The left button is used to select the text to be copied. Move the pointer to the beginning of the text to copy, press and hold the left button, move the cursor to the end of the text to copy, and release the button. Any currently selected text can be deselected by clicking the left button once without moving the mouse. insert The middle button pastes the text from the primary selection, treating it as keyboard input. This topic describes the dtterm action routines. bell ([Percentage]) This action rings the keyboard bell at the specified percentage above or below the base volume. break () This action send a break signal to the child process. cancel () This action sends a CAN (cancel) character to the child process. do () This action sends the escape sequence associated with the Do key to the child process. edit-key (string) This action sends the escape sequence associated with the corresponding edit key to the child process. The interpretation of these keys is application specific. Valid values for string are find, insert, next, prior, remove, and select. extend-start() Start the extension of the currently selected text. extend-end () Extends the current selection. The amount of text selected depends on the number of mouse clicks. function-key-execute (num [,type]) This action sends the escape sequence associated with the corresponding function key num to the child process. Valid values for num are1 through35. If type is set to function (or not set at all), the escape sequence associated with function key num is sent to the child process. If type is set to UDK, then the string associated with user defined key num is sent to the child process. grab-focus () This action performs one of the following depending on the number of multiple mouse clicks. One click will deselect any selected text and set the selection anchor at the pointer position, two clicks will select a word, three clicks will select a line of text, and four clicks will select all text. hard-reset () This action will perform a hard reset on the terminal emulator. help () This action sends the escape sequence associated with the DEC VT220 Help key to the child process. The interpretation of this key is application specific. keymap (name) This action dynamically defines a new translation table whose resource name is name with the suffix Keymap (case is significant). The name None restores the original translation table. keypad-key-execute (string) This action sends the escape sequence associated with the corresponding keypad key to the child process. The interpretation of these keys are application specific. Valid values for string include: f1- f4, space, tab, enter, equal, multiply, add, separator, subtract, decimal, divide, and 0 - 9. move-cursor (direction) This action sends the escape sequence associated with the corresponding cursor motion to the child process. The interpretation of these keys are application specific. Valid values for direction include: up, down, backward, and forward. redraw-display () This action redraws the contents of the text window. scroll (count [,units]) This action will scroll the display memory down if count is less than zero, or up if count is ggeater than zero. The number of lines scrolled is based on count and units. Valid values for units are page, halfpage, or line. The default for units is line. select-adjust () This action extends the selection. The amount of text selected depends on the number of mouse clicks: 1 click = char 2 clicks = word 3 clicks = line 4 clicks = buffer select-all () This action selects all text. select-page () This action selects all text on the screen. self-insert () This action sends the character associated with the key pressed to the child process. soft-reset () This action perform a soft reset of the terminal. stop (state) This action either toggles, starts, or stops the process of reading data from the child process. Valid values for state are toggle, on, and off. string (string) This action insert the specified text string as if it had been typed. The string must be quoted if it contains whitespace or non-alphanumeric characters. The string is interpreted as a hex character constant if it begins with the characters 0x. tab () This action sends a tab to the child process. visual-bell () This action flashes the window quickly. The bindings for virtual keys are vendor specific. Virtual bindings do not apply when the dtterm widget has input focus. For information about bindings for virtual buttons and keys, see VirtualBindings(3X). dtterm includes translations from Primitive. Note that altering translations in #override or #augment mode is undefined. Shift~Ctrl<Key>KP_Multiply: XtDisplayInstalledAccelerators() ~ShiftCtrl<Key>KP_Multiply: XtDisplayAccelerators() ShiftCtrl<Key>KP_Multiply: XtDisplayTranslations() <Key>osfCancel: process-cancel() <Key>osfCopy: copy-clipboard() <Key>osfCut: copy-clipboard() <Key>osfPaste: paste-clipboard() <Key>osfBeginLine: beginning-of-buffer() <Key>osfEndLine: end-of-buffer() Shift<Key>osfUp: scroll(1,line) Shift<Key>osfDown: scroll(-1,line) <Key>osfUp: move-cursor(up) <Key>osfDown: move-cursor(down) <Key>osfLeft: move-cursor(backward) <Key>osfRight: move-cursor(forward) <Key>Find: vt-edit-key(find) <Key>Insert: vt-edit-key(insert) <Key>Select: vt-edit-key(select) <Key>Do: vt-edit-key(do) <Key>Help: vt-edit-key(help) <Key>Menu: vt-edit-key(menu) ~Shift<Key>osfPageUp: vt-edit-key(prior) ~Shift<Key>osfPageDown: vt-edit-key(next) <Key>osfPageUp: scroll(-1,page) <Key>osfPageDown: scroll(1,page) Mod1<Key>Break: soft-reset() Shift<Key>Break: hard-reset() ~Shift ~Mod1<Key>Break: vt-break() Ctrl<Key>Cancel: stop(long) ~Ctrl<Key>Cancel: stop() ~Shift<Key>Tab: tab() ~Mod1<Key>KP_Space: keypad-key-execute(space) ~Mod1<Key>KP_Tab: keypad-key-execute(tab) ~Mod1<Key>KP_Enter: keypad-key-execute(enter) ~Mod1<Key>KP_F1: keypad-key-execute(f1) ~Mod1<Key>KP_F2: keypad-key-execute(f2) ~Mod1<Key>KP_F3: keypad-key-execute(f3) ~Mod1<Key>KP_F4: keypad-key-execute(f4) ~Mod1<Key>KP_Equal: keypad-key-execute(equal) ~Mod1<Key>KP_Multiply: keypad-key-execute(multiply) ~Mod1<Key>KP_Add: keypad-key-execute(add) ~Mod1<Key>KP_Separator: keypad-key-execute(separator) ~Mod1<Key>KP_Subtract: keypad-key-execute(subtract) ~Mod1<Key>KP_Decimal: keypad-key-execute(decimal) ~Mod1<Key>KP_Divide: keypad-key-execute(divide) ~Mod1<Key>KP_0: keypad-key-execute(0) ~Mod1<Key>KP_1: keypad-key-execute(1) ~Mod1<Key>KP_2: keypad-key-execute(2) ~Mod1<Key>KP_3: keypad-key-execute(3) ~Mod1<Key>KP_4: keypad-key-execute(4) ~Mod1<Key>KP_5: keypad-key-execute(5) ~Mod1<Key>KP_6: keypad-key-execute(6) ~Mod1<Key>KP_7: keypad-key-execute(7) ~Mod1<Key>KP_8: keypad-key-execute(8) ~Mod1<Key>KP_9: keypad-key-execute(9) Shift<Key>F1: vt-function-key-execute(1, UDK) Shift<Key>F2: vt-function-key-execute(2, UDK) Shift<Key>F3: vt-function-key-execute(3, UDK) Shift<Key>F4: vt-function-key-execute(4, UDK) Shift<Key>F5: vt-function-key-execute(5, UDK) Shift<Key>F6: vt-function-key-execute(6, UDK) Shift<Key>F7: vt-function-key-execute(7, UDK) Shift<Key>F8: vt-function-key-execute(8, UDK) Shift<Key>F9: vt-function-key-execute(9, UDK) Shift<Key>F10: vt-function-key-execute(10, UDK) Shift<Key>F11: vt-function-key-execute(11, UDK) Shift<Key>F12: vt-function-key-execute(12, UDK) Shift<Key>F13: vt-function-key-execute(13, UDK) Shift<Key>F14: vt-function-key-execute(14, UDK) Shift<Key>F15: vt-function-key-execute(15, UDK) Shift<Key>F16: vt-function-key-execute(16, UDK) Shift<Key>F17: vt-function-key-execute(17, UDK) Shift<Key>F18: vt-function-key-execute(18, UDK) Shift<Key>F19: vt-function-key-execute(19, UDK) Shift<Key>F20: vt-function-key-execute(20, UDK) Shift<Key>F21: vt-function-key-execute(21, UDK) Shift<Key>F22: vt-function-key-execute(22, UDK) Shift<Key>F23: vt-function-key-execute(23, UDK) Shift<Key>F24: vt-function-key-execute(24, UDK) Shift<Key>F25: vt-function-key-execute(25, UDK) Shift<Key>F26: vt-function-key-execute(26, UDK) Shift<Key>F27: vt-function-key-execute(27, UDK) Shift<Key>F28: vt-function-key-execute(28, UDK) Shift<Key>F29: vt-function-key-execute(29, UDK) Shift<Key>F30: vt-function-key-execute(30, UDK) Shift<Key>F31: vt-function-key-execute(31, UDK) Shift<Key>F32: vt-function-key-execute(32, UDK) Shift<Key>F33: vt-function-key-execute(33, UDK) Shift<Key>F34: vt-function-key-execute(34, UDK) Shift<Key>F35: vt-function-key-execute(35, UDK) ~Shift<Key>F1: vt-function-key-execute(1, function) ~Shift<Key>F2: vt-function-key-execute(2, function) ~Shift<Key>F3: vt-function-key-execute(3, function) ~Shift<Key>F4: vt-function-key-execute(4, function) ~Shift<Key>F5: vt-function-key-execute(5, function) ~Shift<Key>F6: vt-function-key-execute(6, function) ~Shift<Key>F7: vt-function-key-execute(7, function) ~Shift<Key>F8: vt-function-key-execute(8, function) ~Shift<Key>F9: vt-function-key-execute(9, function) ~Shift<Key>F10: vt-function-key-execute(10, function) ~Shift<Key>F11: vt-function-key-execute(11, function) ~Shift<Key>F12: vt-function-key-execute(12, function) ~Shift<Key>F13: vt-function-key-execute(13, function) ~Shift<Key>F14: vt-function-key-execute(14, function) ~Shift<Key>F15: vt-function-key-execute(15, function) ~Shift<Key>F16: vt-function-key-execute(16, function) ~Shift<Key>F17: vt-function-key-execute(17, function) ~Shift<Key>F18: vt-function-key-execute(18, function) ~Shift<Key>F19: vt-function-key-execute(19, function) ~Shift<Key>F20: vt-function-key-execute(20, function) ~Shift<Key>F21: vt-function-key-execute(21, function) ~Shift<Key>F22: vt-function-key-execute(22, function) ~Shift<Key>F23: vt-function-key-execute(23, function) ~Shift<Key>F24: vt-function-key-execute(24, function) ~Shift<Key>F25: vt-function-key-execute(25, function) ~Shift<Key>F26: vt-function-key-execute(26, function) ~Shift<Key>F27: vt-function-key-execute(27, function) ~Shift<Key>F28: vt-function-key-execute(28, function) ~Shift<Key>F29: vt-function-key-execute(29, function) ~Shift<Key>F30: vt-function-key-execute(30, function) ~Shift<Key>F31: vt-function-key-execute(31, function) ~Shift<Key>F32: vt-function-key-execute(32, function) ~Shift<Key>F33: vt-function-key-execute(33, function) ~Shift<Key>F34: vt-function-key-execute(34, function) ~Shift<Key>F35: vt-function-key-execute(35, function) <KeyRelease>: key-release() <KeyPress>: insert() ~Shift~Ctrl<Btn1Down>: grab-focus() Shift~Ctrl<Btn1Down>: extend-start() ~Ctrl<Btn1Motion>: select-adjust() ~Ctrl<Btn1Up>: extend-end() ~Shift<Btn2Down>: process-bdrag() ~Shift<Btn2Up>: copy-to() <EnterWindow>: enter() <LeaveWindow>: leave() <FocusIn>: focus-in() <FocusOut>: focus-out() Each of the topics below contains a list of applicable escape sequences. See the dtterm(5x) man page for more detailed information. The table below shows the key press and the corresponding escape sequences sent for Normal and Application modes. Cursor Key Mode KEY Normal Application ========= ====== =========== Cursor Up Esc[A EscOA Cursor Down Esc[B EscOB Cursor Right Esc[C EscOC Cursor Left Esc[D EscOD The table below shows the key press and the corresponding escape sequences sent for Numeric and Application modes. Application Keypad Mode KEY Normal Application ========= ====== =========== space space EscOA tab tab EscOI Enter CR/CR-LF EscOM PF1 EscOP EscOP PF2 EscOQ EscOQ PF3 EscOR EscOR PF4 EscOS EscOS * (multiply) * EscOj + (add) + EscOk , (comma) , EscOl - (minus) - EscOm . (period) . EscOn / (divide) / EscOo 0 0 EscOp 1 1 EscOq 2 2 EscOr 3 3 EscOs 4 4 EscOt 5 5 EscOu 6 6 EscOv 7 7 EscOw 8 8 EscOx 9 9 EscOy =(equal) = EscOX The table below shows the key press and the corresponding escape sequences sent. KEY Escape Sequence Sent ========= ==================== F1 Esc[11~ F2 Esc[12~ F3 Esc[13~ F4 Esc[14~ F5 Esc[15~ F6 Esc[17~ F7 Esc[18~ F8 Esc[19~ F9 Esc[20~ F10 Esc[21~ F11 Esc[23~ F12 Esc[24~ F13 Esc[25~ F14 Esc[26~ F15 Esc[28~ F16 Esc[29~ F17 Esc[31~ F18 Esc[32~ F19 Esc[33~ F20 Esc[34~ Help Esc[28~ Menu Esc[29~ Find Esc[1~ Insert Esc[2~ Remove Esc[3~ Select Esc[4~ Prior Esc[5~ Next Esc[6~ The table below shows the key press and the corresponding escape sequences sent. KEY Escape Sequence Sent ========= ==================== F1 Esc[224z F2 Esc[225z F3 Esc[226z F4 Esc[227z F5 Esc[228z F6 Esc[229z F7 Esc[230z F8 Esc[231z F9 Esc[232z F10 Esc[233z F11 Esc[192z F12 Esc[193z F13 Esc[194z F14 Esc[195z F15 Esc[196z F16 Esc[197z F17 Esc[198z F18 Esc[199z F19 Esc[200z F20 Esc[201z F21 (R1) Esc[208z F22 (R2) Esc[209z F23 (R3) Esc[210z F24 (R4) Esc[211z F25 (R5) Esc[212z F26 (R6) Esc[213z F27 (R7) Esc[214z F28 (R8) Esc[215z F29 (R9) Esc[216z F30 (R10) Esc[217z F31 (R11) Esc[218z F32 (R12) Esc[219z F33 (R13) Esc[220z F34 (R14) Esc[221z F35 (R15) Esc[222z Help Esc[196z Menu Esc[197z Find Esc[1z Insert Esc[2z Remove Esc[3z Select Esc[4z Prior Esc[5z Next Esc[6z The following table describes the received escape sequences supported by dtterm. Escape Sequence Description ======== =========== Ctrl-G Bell (Ctrl-G) Ctrl-H Backspace (Ctrl-H) Ctrl-I Horizontal Tab (HT) (Ctrl-I) Ctrl-J Line Feed or New Line (NL) (Ctrl-J) Ctrl-K Vertical Tab same as Line Feed Ctrl-L Form Feed or New Page same as Line Feed Ctrl-M Carriage Return (Ctrl-M) Esc ( B Designate ASCII (base font) as G0. Esc ( 0 Designate DEC Special Graphic (line draw) as G0. Esc ) B Designate ASCII (base font) as G1. Esc ) 0 Designate DEC Special Graphic (line draw) as G1. Esc * B Designate ASCII (base font) as G2. Esc * 0 Designate DEC Special Graphic (line draw) as G2. Esc + B Designate ASCII (base font) as G3. Esc + 0 Designate DEC Special Graphic (line draw) as G3. Ctrl-N Map G1 into GL. Ctrl-O Map G0 into GL. Esc n Map G2 into GL. Esc o Map G3 into GL. Esc N Map G2 into GL for the next character. Esc O Map G3 into GL for the next character. Esc Space F Select 7-bit C1 Control Characters. In this mode, the dtterm utility sends all C1 Control Characters to the host as 7-bit escape sequences. That is, CSI is sent to the host as &newline;f2Esc&newline;fP [. Esc Space G Select 8-bit C1 Control Characters. In this mode, the dtterm utility sends all C1 Control Characters to the host as 8-bit control codes. That is, CSI is sent back as the hexadecimal value 0x9B. Esc#8 DEC Screen Align Test (DECALN) Esc7 Save Cursor (DECSC) Esc8 Restore Cursor (DECRC) Esc= Application Keypad (DECPAM) Esc> Normal Keypad (DECPNM) EscD Index (IND) EscE Next Line (NEL) EscH Tab Set (HTS) EscM Reverse Index (RI) EscPpi;pi|pi/hex digits;pi/hex digits;...Esc&newline; Device Control String (DCS) EscZ Return Terminal ID (DECID) Escc Full Reset (RIS) Escn Select the G2 Character Set (LS2) Esco Select the G3 Character Set (LS3) Esc[pi"p Select Compatibility Level (DECSCL) Esc[pi@ Insert Blank Characters (ICH) Esc[piA Cursor Up (CUU) Esc[piB Cursor Down (CUD) Esc[piC Cursor Forward (CUF) Esc[piD Cursor Backward (CUB) Esc[piF Cursor to pith preceding line (CPL) Esc[piG Cursor to Column p (CHA) Esc[pi; piH Cursor Position (CUP) Esc[piJ Erase in Display (ED) Esc[piK Erase in Line (EL) Esc[piL Insert Lines (IL) Esc[piM Delete Lines (DL) Esc[piP Delete Characters (DCH) Esc[piS Scroll up p lines (SU) Esc[piT Scroll Down (SD) Esc[piX Erase pi characters (ECH) Esc[pic Send Device Attributes Esc[pi; pif Horizontal and Vertical Position (HVP) Esc[pig Tab Clear (TBC) Esc[pih Set Mode (SM) Esc[pil Reset Mode (RM) Esc[pim Character Attributes (SGR) Esc[pin Device Status Report (DSR) Esc[pi; pir Set Scrolling Region (DECSTBM) Esc[pix Request Terminal Parameters Esc[?pih DEC Private Mode Set (DECSET) Esc[?pil DEC Private Mode Reset (DECRSET) Esc[?pin DEC Private Mode Status (DSR) Esc[?pir Restore DEC Private Mode Values Esc[?pis Save DEC Private Mode Values Esc]?pi; piCtrl-G Set Text Parameters Esc]p1;p2;p3t Sun Escape Sequences Esc_piEsc\ Application Program Esc[?piK Selective erase in line (DECSEL) Esc[?piJ Selective erase in display (DECSED) Esc!p Soft Terminal Reset (DECSTR) keyboard information This topic contains a list of keyboard functionality associated with dtterm. It includes only the keys that are special for dtterm. They apply only when the terminal text area has the keyboard focus. They do not apply when a dialog, pulldown, or popup menu has the keyboard focus. In some cases, additional modifiers are ignored. For example, the description for F1 does not apply to Shift F1, but the description of Tab applies to both Tab and Shift Tab. <Key>Home Scroll to beginning of the buffer Shift<Key>Home Scroll to the end of the buffer Shift<Key>Prior Scroll up one page Shift<Key>Next Scroll down one page <Key>Up Sends the escape sequence as described in dtterm Escape Sequences <Key>Down Sends the escape sequence as described in dtterm Escape Sequences <Key>Left Sends the escape sequence as described in dtterm Escape Sequences <Key>Right Sends the escape sequence as described in dtterm Escape Sequences CTRL<Key>Up Sends the escape sequence as described in dtterm Escape Sequences CTRL<Key>Down Sends the escape sequence as described in dtterm Escape Sequences CTRL<Key>Left Sends the escape sequence as described in dtterm Escape Sequences CTRL<Key>Right Sends the escape sequence as described in dtterm Escape Sequences <Key>Prior <Key>Next <Key>Find <Key>Insert <Key>Select <Key>Cancel Toggles on/off subprocess output. <Key>Tab Sends a tab character. <Key>Break Sends an RS232 break to the subprocess. Meta<Key>Break Soft Reset as described in dtterm Escape Sequences. Shift<Key>Break Hard Reset as described in dtterm Escape Sequences. <Key>F1 Sends the function key escape sequence through as described in dtterm Escape Sequences. <Key>F35 Shift<Key>F1 Sends the user defined sequence (if any) through for that key. Shift<Key>F35 Esc Sends the escape character <Key>KP_F1 Sends the escape sequence as described through in dtterm Escape Sequences. <Key>KP_F4 <Key>KP_0 Sends either the char or escape sequence through as described in dtterm Escape Sequences. <Key>KP_9 <Key>KP_Equal <Key>KP_Multiply <Key>KP_Add <Key>KP_Separator <Key>KP_Subtract <Key>KP_Decimal <Key>KP_Divide <Key>KP_Space <Key>KP_Tab <Key>KP_Enter Note that not all vendors' keyboards supply these keys. Please see your local vendor's documentation for alternate key bindings. There are four areas that you can control from the Global Options dialog box: Each of these areas contains one or more option menus from which you can choose values for a particular option. Any changes made in the Global Options dialog box apply only to the dtterm window from which you accessed the dialog box. All of the cursor aspects are controlled by selecting a choice in an options menu button or, in the case of the Blink Rate option, entering a value in the text field. cursor:appearance Choose Global from the Options menu in the dtterm window. Press mouse button 1 on the Cursor Style list and drag to the cursor type you want (Box, Underline, or Invisible). Click Apply to save your change, or OK to save your change and quit the dialog box. cursor:blinking blinking cursor Choose Global from the Options menu in the dtterm window. Press mouse button 1 on the Blinking Cursor menu button and drag to the cursor behavior you want. Enabled (the default) means the cursor will blink; Disabled stops the blinking. If you set the cursor to blink and want the blink rate to be different from the default 250 milliseconds, type the rate you want in the Blink Rate text field. Click Apply to save your change, or OK to save your change and quit the dialog box. The Color Control option enables you to switch your dtterm foreground and background colors. The default option is Normal; the foreground and background colors you choose are displayed normally. Choose Global from the Options menu in the dtterm window. Press mouse button 1 on the Window Background menu button and drag to determine how the colors will appear. Normal (the default) keeps the colors as assigned; Inverse switches them. Click Apply to save your change, or OK to save your change and quit the dialog box. The Scroll Behavior option allows you to enable and disable smooth scrolling. The default is disabled. Choose Global from the Options menu in the dtterm window. Press mouse button 1 on the Smooth Scrolling menu button and drag to the type of scrolling you want. Disabled (the default) scrolls a page at a time, and Enabled scrolls a single line at a time, which makes scrolling smoother. Click Apply to save your change, or OK to save your change and quit the dialog box. All of the Bell Control options are controlled by selecting a choice in an options menu button or, in the case of the Margin Distance option, entering a value in the text field space. bell type Choose Global from the Options menu in the dtterm window. Press mouse button 1 on the Bell Type menu button and drag to the bell type you want. Audible (the default) means the bell will ring; Visible means the bell will blink the background color rather than ringing. Click Apply to save your change, or OK to save your change and quit the dialog box. The Margin Warning Option is either disabled (the default) or enabled. Choose Global from the Options menu in the dtterm window. Press mouse button 1 on the Margin Warning menu button and drag to the choice you want. Disabled (the default) means there will be no margin warning; Enabled means a margin warning will sound. If you enable the margin warning bell and want a margin distance other than the default 10 characters, type the distance you want in the Margin Distance text field. Click Apply to save your change, or OK to save your change and quit the dialog box. There are two areas that you can control from the "Terminal Options" dialog box: Each of these areas contains several option menus from which you can choose values for a particular option. Any changes made in the Terminal Options dialog box apply only to the dtterm window from which you accessed the dialog box. You can control four aspects of your keyboard when using dtterm by setting values from the dtterm Terminal Options dialog box: cursor key mode Cursor Key Mode (see "Cursor Keys, VT220 Mode") is either Normal (the default) or Application. In Normal mode, the cursor keys move the cursor in the specified direction. In Application mode, the cursor keys generate escape sequences that the application uses for its own purpose. Choose Terminal from the Options Menu in the dtterm window. Click the options menu button next to "Cursor Key Mode" in the Keyboard Control Section of the Terminal Options dialog box. Drag the pointer to the mode you want. Click Apply to save your changes, or OK to save your changes and quit the dialog box. keypad mode Keypad Mode is either Numeric (the default) or Application (see "Auxiliary Keypad, ANSI Mode"). In Numeric mode, when keys on the numeric keypad are pressed, the corresponding numeral is displayed in the dtterm window. In Application mode, the key presses generate escape sequences that the application uses for its own purpose. Choose Terminal from the Options Menu in the dtterm window. Click the options menu button next to "Keypad Mode" in the Keyboard Control Section of the Terminal Options dialog box. Drag the pointer to the mode you want. Click Apply to save your changes, or OK to save your changes and quit the dialog box. The Newline Sequence option lets you choose from Return Only (the default) or Return/Line Feed. The former option generates only a carriage return, while the latter option generates both a carriage return and a line feed. Choose Terminal from the Options Menu in the dtterm window. Click the options menu button next to "Newline Sequence" in the Keyboard Control Section of the Terminal Options dialog box. Drag the pointer to the mode you want. Click Apply to save your changes, or OK to save your changes and quit the dialog box. The User Function Keys option allows you to have the user function keys locked or unlocked (the default). Choose Terminal from the Options Menu in the dtterm window. Click the options menu button next to "User Function Keys" in the Keyboard Control Section of the Terminal Options dialog box. Drag the pointer to the mode you want. Click Apply to save your changes, or OK to save your changes and quit the dialog box. Screen Control You have control of three aspects of screen control in a dtterm window:

The 132 Column Switching option allows you to toggle this capability. The default is Disabled. When disabled and an application switches to 132 columns, nothing happens. When enabled and an application switches to 132 columns, the dtterm window automatically enlarges to display 132 columns. This option corresponds to the following dtterm command-line options and resource: "-132" (command-line option) "+132" (command-line option) "c132" (resource) Choose Terminal from the Options Menu in the dtterm window. Click the options menu button next to "132 Column Switching" in the Screen Control Section of the Terminal Options dialog box. Drag the pointer to the mode you want. Click Apply to save your changes, or OK to save your changes and quit the dialog box. The End-of-Line Wrapping option allows you to toggle this capability. The default is Enabled. When enabled, characters automatically wrap to the next line when the end-of-line is reached. When disabled, no wrapping occurs. This option corresponds to the following dtterm command-line options and resource: "-aw" (command-line option) "+aw" (command-line option) "autoWrap" (resource) Choose Terminal from the Options Menu in the dtterm window. Click the options menu button next to "End-of-line Wrapping" in the Screen Control Section of the Terminal Options dialog box. Drag the pointer to the mode you want. Click Apply to save your changes, or OK to save your changes and quit the dialog box. Reverse End-of-Line Wrapping The reverse End-of-Line Wrapping option allows you to toggle this capability. The default is Disabled. When enabled, backspace characters automatically wrap to the next higher line when the end-of-line is reached. When disabled, no wrapping occurs. This option corresponds to the following dtterm command-line options and resource: "-rw" (command-line option) "+rw" (command-line option) "reverseWrap" (resource) Choose Terminal from the Options Menu in the dtterm window. Click the options menu button next to "Reverse End-of-line Wrapping" in the Screen Control Section of the Terminal Options dialog box. Drag the pointer to the mode you want. Click Apply to save your changes, or OK to save your changes and quit the dialog box.