XCOMM!/bin/ksh
XCOMM $XConsortium: dtconfig.src /main/5 1996/04/23 12:12:10 drk $
XCOMM  (c) Copyright 1996 Digital Equipment Corporation.
XCOMM  (c) Copyright 1993,1994,1996 Hewlett-Packard Company.
XCOMM  (c) Copyright 1993,1994,1996 International Business Machines Corp.
XCOMM  (c) Copyright 1993,1994,1996 Sun Microsystems, Inc.
XCOMM  (c) Copyright 1993,1994,1996 Novell, Inc. 
XCOMM  (c) Copyright 1996 FUJITSU LIMITED.
XCOMM  (c) Copyright 1996 Hitachi.
XCOMM  (c) Copyright 1993, 1994 Unix System Labs, Inc., a subsidiary of
XCOMM      Novell, Inc.
XCOMM
XCOMM This version of the CDE dtconfig script is for use in the Solaris(TM)
XCOMM operating environment.
XCOMM
XCOMM  Common Desktop Environment
XCOMM
XCOMM This script can be run after CDE installation to configure CDE within
XCOMM the host platforms operating environment.  For example, when auto-start 
XCOMM is selected, the CDE desktop login window will be displayed at end of the
XCOMM workstation's power up boot cycle.
XCOMM
XCOMM Location:	CDE_INSTALLATION_TOP/bin/dtconfig 
#define HASH #

mode=$1
arg_count=$#
prg_name=$0

Message()
{
  HASH Message() - display message from dtconfig.cat
  HASH   $1 - message id
  HASH   $2 - fallback message text

  if [ -x $DTDSPMSG ]; then
	$DTDSPMSG -s 20 dtconfig $1 "$2" "$3"
	echo " "
  else
	echo "$2"
  fi
}

usage_error() {
    echo " "
    Message 1 " CDE configuration utility"
    echo " "
    Message 2  "  $prg_name -d        (disable auto-start)" $prg_name
    Message 3  "  $prg_name -e        (enable auto-start)" $prg_name
    Message 4  "  $prg_name -kill     (kill dtlogin)" $prg_name
    Message 5  "  $prg_name -reset    (reset dtlogin)" $prg_name
    Message 6  "  $prg_name -p        (printer action update)" $prg_name
    Message 25 "  $prg_name -inetd    (inetd.conf /usr/dt daemons)" $prg_name
    Message 26 "  $prg_name -inetd.ow (inetd.conf /usr/openwin daemons)" $prg_name
    echo " "
}

XCOMM
XCOMM Allow for configured and factory versions of dtlogin.rc
XCOMM

if [ -f CDE_CONFIGURATION_TOP/config/dtlogin.rc ]
then
  RC_MASTER=CDE_CONFIGURATION_TOP/config/dtlogin.rc
elif [ -f CDE_INSTALLATION_TOP/config/dtlogin.rc ]
then
  RC_MASTER=CDE_INSTALLATION_TOP/config/dtlogin.rc
fi

RC_COPY=/etc/init.d/dtlogin

XCOMM
XCOMM Allow for configured and factory versions of dtlogin.xml
XCOMM

if [ -f CDE_CONFIGURATION_TOP/config/dtlogin.xml ]
then
  SVC_MASTER=CDE_CONFIGURATION_TOP/config/dtlogin.xml
elif [ -f CDE_INSTALLATION_TOP/config/dtlogin.xml ]
then
  SVC_MASTER=CDE_INSTALLATION_TOP/config/dtlogin.xml
fi

SVC_COPY=application/graphical-login/dtlogin

LEVEL_0_KILL=/etc/rc0.d/K10dtlogin
LEVEL_1_KILL=/etc/rc1.d/K10dtlogin
LEVEL_2_START=/etc/rc2.d/S99dtlogin

DTDSPMSG=/usr/dt/bin/dtdspmsg

NAWK=/usr/bin/nawk


set `/bin/id`
if [ $1 != "uid=0(root)" ]; then
        Message 7 "$prg_name: this script must be run as root" $prg_name
        exit 1
fi


if [ $arg_count -ne 1 ]; then
	echo " "
        HASH
        HASH Display error message for too many arguments
        HASH
        if [ $arg_count -gt 1 ]; then
                Message 8 "Usage: Too many arguments"
 
        HASH
        HASH Display error message for NULL arguments passed
        HASH
        elif [ $arg_count -eq 0 ]; then
                Message 9 "Usage: Needs one argument"
 
        fi
	usage_error
        exit 1
fi


rc_master_check() {
	if [ ! -x $RC_MASTER ]; then
	   Message 10 "option failed"
	   Message 11 "could not execute $RC_MASTER" $RC_MASTER
	   exit 1
	fi
}

nawk_check() {
	if [ ! -x $NAWK ]; then
	   Message 10 "option failed"
	   Message 11 "could not execute $NAWK" $NAWK
	   exit 1
	fi
}


XCOMM Following inetdSP() procedure is from Sun CDE SI post_install
XCOMM configMin file.  It adds the Subprocess Control daemon inetd.conf
XCOMM line so it points to /usr/dt/bin/dtspcd.

inetdSP()
{
FILE=/etc/inetd.conf
TMPFILE=/tmp/inetd.conf

XCOMM
XCOMM check for existence of /etc/inetd.conf
XCOMM

    if [ ! -f $FILE ]   # highly unlikely
    then
        echo "" >$FILE
    fi

XCOMM
XCOMM see if it already exists
XCOMM

    $NAWK '{if ($1 == "dtspc")
                print $0 > "/tmp/dtspc-already-there"
         }' $FILE >/dev/null

    DTSPCD=CDE_INSTALLATION_TOP/bin/dtspcd

    if [ ! -f /tmp/dtspc-already-there ]
    then
        echo "dtspc stream tcp nowait root $DTSPCD $DTSPCD" >>$FILE
    else
        rm /tmp/dtspc-already-there
    fi

XCOMM
XCOMM remove legacy entries like dtspcd
XCOMM

    $NAWK '{if ($1 == "dtspcd" || $1 == "#dtspcd")
                ;
          else
                print $0
         }' $FILE >$TMPFILE

    cp $TMPFILE $FILE
    rm $TMPFILE

FILE=/etc/services
TMPFILE=/tmp/services

XCOMM
XCOMM check for existence of /etc/services
XCOMM

    if [ ! -f $FILE ]   # highly unlikely
    then
        echo "" >$FILE
    fi

XCOMM
XCOMM see if it already exists
XCOMM
    $NAWK '{if ($1 == "dtspc")
                print $0 > "/tmp/dtspc-already-there"
         }' $FILE >/dev/null

    if [ ! -f /tmp/dtspc-already-there ]
    then
        echo "dtspc\t6112/tcp\t#subprocess control" >>$FILE
    else
        rm /tmp/dtspc-already-there
    fi

XCOMM
XCOMM remove legacy entries like dtspcd
XCOMM

    $NAWK '{if ($1 == "dtspcd" || $1 == "#dtspcd")
                ;
          else
                print $0
         }' $FILE >$TMPFILE

    cp $TMPFILE $FILE
    rm $TMPFILE
}


XCOMM Following inetdTT() procedure code from Sun CDE SI post_install
XCOMM configTT file.  It updates the ToolTalk daemon inetd.conf
XCOMM line so it points to /usr/dt/bin/rpc.ttdbserverd.

inetdTT()
{
FILE=/etc/inetd.conf
TMPFILE=/tmp/inetd.conf
TTDBSERVERD=CDE_INSTALLATION_TOP/bin/rpc.ttdbserverd

XCOMM
XCOMM  remove any non-dt ttdbserverd line
XCOMM

    $NAWK -v ttdb=$TTDBSERVERD \
        '{if ($1 == "100083/1" && $6 != ttdb)
                ;
          else
                print $0
         }' $FILE >$TMPFILE

    cp $TMPFILE $FILE
    rm $TMPFILE

XCOMM
XCOMM  add dt ttdbserverd line if its not already there
XCOMM

    $NAWK '{if ($1 == "100083/1")
                print $0 > "/tmp/tt-already-there"
         }' $FILE >/dev/null

    if [ ! -f /tmp/tt-already-there ]
    then
        echo "100083/1 stream rpc/tcp wait root $TTDBSERVERD $TTDBSERVERD" \
                 >>$FILE
    else
        rm /tmp/tt-already-there
    fi
}


XCOMM Following owTT() procedure updates the ToolTalk daemon inetd.conf
XCOMM line so it points to /usr/openwin/bin/rpc.ttdbserverd.

owTT()
{
FILE=/etc/inetd.conf
TMPFILE=/tmp/inetd.conf
TTDBSERVERD=/usr/openwin/bin/rpc.ttdbserverd

XCOMM
XCOMM remove any non-ow ttdbserverd line
XCOMM

    $NAWK -v ttdb=$TTDBSERVERD \
        '{if ($1 == "100083/1" && $6 != ttdb)
                ;
          else
                print $0
         }' $FILE >$TMPFILE

    cp $TMPFILE $FILE
    rm $TMPFILE

XCOMM
XCOMM add ow ttdbserverd line if its not already there
XCOMM

    $NAWK '{if ($1 == "100083/1")
                print $0 > "/tmp/tt-already-there"
         }' $FILE >/dev/null

    if [ ! -f /tmp/tt-already-there ]
    then
        echo "100083/1 stream rpc/tcp wait root $TTDBSERVERD $TTDBSERVERD" \
                 >>$FILE
    else
        rm /tmp/tt-already-there
    fi
}


XCOMM Following inetdCM() procedure is from Sun CDE SI post_install
XCOMM configRun file.  It updates the Calendar Manager daemon inetd.conf
XCOMM line so it points to /usr/dt/bin/rpc.cmsd.

inetdCM()
{
FILE=/etc/inetd.conf
TMPFILE=/tmp/inetd.conf
CMSD=CDE_INSTALLATION_TOP/bin/rpc.cmsd

XCOMM
XCOMM remove any non-dt rpc.cmsd line
XCOMM

    $NAWK -v cmsd=$CMSD \
        '{if ( ($1 == "100068/2-4" || $1 == "100068/2-5") && $6 != cmsd)
                ;
          else
                print $0
         }' $FILE >$TMPFILE

    cp $TMPFILE $FILE
    rm $TMPFILE

XCOMM 
XCOMM remove possible old dt cmsd level 2-4 entry
XCOMM

    $NAWK -v cmsd=$CMSD \
        '{if ($1 == "100068/2-4" && $6 == cmsd)
                ;
          else
                print $0
         }' $FILE >$TMPFILE

    cp $TMPFILE $FILE
    rm $TMPFILE

XCOMM
XCOMM add dt cmsd line in needed 
XCOMM

    $NAWK -v cmsd=$CMSD \
        '{if ($6 == cmsd && $1 == "100068/2-5")
                print $0 > "/tmp/cmsd-already-there"
         }' $FILE >/dev/null

    if [ ! -f /tmp/cmsd-already-there ]
    then
        echo "100068/2-5 dgram rpc/udp wait root $CMSD rpc.cmsd" >>$FILE
    else
        rm /tmp/cmsd-already-there
    fi
}


XCOMM Following owCM() procedure updates the Calendar Manager daemon inetd.conf
XCOMM line so it points to /usr/openwin/bin/cmsd.

owCM()
{
FILE=/etc/inetd.conf
TMPFILE=/tmp/inetd.conf
CMSD=/usr/openwin/bin/rpc.cmsd

XCOMM
XCOMM remove any non-ow rpc.cmsd line
XCOMM

    $NAWK -v cmsd=$CMSD \
        '{if ( ($1 == "100068/2-4" || $1 == "100068/2-5") && $6 != cmsd )
                ;
          else
                print $0
         }' $FILE >$TMPFILE

    cp $TMPFILE $FILE
    rm $TMPFILE

XCOMM
XCOMM  add openwin rpc.cmsd line if not already there 
XCOMM

    $NAWK -v cmsd=$CMSD \
        '{if ( ($1 == "100068/2-4" || $1 == "100068/2-5") && $6 == cmsd )
                print $0 > "/tmp/cmsd-already-there"
         }' $FILE >/dev/null

XCOMM
XCOMM if it is not there, add it
XCOMM  (note openwin cmsd is one rev back, its at level 2-4)
XCOMM

    if [ ! -f /tmp/cmsd-already-there ]
    then
        echo "100068/2-4 dgram rpc/udp wait root $CMSD rpc.cmsd" >>$FILE
    else
        rm /tmp/cmsd-already-there
    fi
}



case "$mode" in
'-d')
	if [ -f /usr/sbin/svcadm ]; then
	  if svcs $SVC_COPY >/dev/null 2>&1; then
	    if ! svcadm disable $SVC_COPY >/dev/null; then
	      Message 12 "disable failed"
	      Message 13 "could not disable dtlogin service" "svc-dtlogin"
	      exit 1
	    fi
	  fi
	else

	  /usr/bin/rm -f $LEVEL_2_START

	  if [ -f $LEVEL_2_START ]; then
	    Message 12 "disable failed"
	    Message 13 "could not remove $LEVEL_2_START" $LEVEL_2_START
	    exit 1
	  fi
	fi

	Message 14 "done"
	Message 15 "desktop auto-start disabled."
	;;

'-e')
	if [ -f /usr/sbin/svcadm ]; then
	  if ! svcs $SVC_COPY >/dev/null 2>&1; then
	    if ! svccfg import $SVC_MASTER; then
	      Message 16 "Enable Failed"
	      Message 17 "could not import $SVC_MASTER" $SVC_MASTER
	      exit 1
	    fi
	  elif ! svcadm enable $SVC_COPY >/dev/null; then
	    Message 16 "enable failed"
	    Message 17 "could not enable dtlogin service" svc-dtlogin
	    exit 1
	  fi
	else
	  if [ -f $RC_MASTER ]; then
	    /usr/bin/rm -f $RC_COPY
	  fi

	  if [ ! -x $RC_COPY ]; then
	    if [ ! -f $RC_MASTER ]; then
	      Message 16 "enable failed"
	      Message 17 "could not find $RC_MASTER" $RC_MASTER
	      exit 1
	    fi

	    /usr/bin/cp $RC_MASTER $RC_COPY
	    /usr/bin/chmod 0555 $RC_COPY
	
	    if [ ! -x $RC_COPY ]; then
	      Message 16 "enable failed"
	      Message 18 "could not create $RC_COPY" $RC_COPY
	      exit 1
	    fi
	  fi

	  /usr/bin/rm -f $LEVEL_0_KILL
	  /usr/bin/ln $RC_COPY $LEVEL_0_KILL

	  /usr/bin/rm -f $LEVEL_1_KILL
	  /usr/bin/ln $RC_COPY $LEVEL_1_KILL

	  /usr/bin/rm -f $LEVEL_2_START
	  /usr/bin/ln $RC_COPY $LEVEL_2_START

	  if [ ! -f $LEVEL_2_START ]; then
	    Message 16 "enable failed"
	    Message 19 "could not create $LEVEL_2_START" $LEVEL_2_START
	    exit 1
	  fi

	fi
	Message 14 "done"
	Message 20 "desktop auto-start enabled."
	;;

'-inetd')
	nawk_check
	inetdSP
	inetdCM
	inetdTT
	Message 14 "done"
	Message 27 "Next system boot, following will be run from /usr/dt/bin"
	Message 28 "    rpc.ttdbserverd         (ToolTalk)" 
	Message 29 "    rpc.cmsd                (Calendar Manager)"
	Message 30 "    dtspcd                  (Subprocess Control)"
	;;

'-inetd.ow')
    nawk_check
    owCM
    owTT
    Message 14 "done"
    Message 31 "Next system boot, following will be run from /usr/openwin/bin"
    Message 32 "    rpc.ttdbserverd         (ToolTalk)" 
    Message 33 "    rpc.cmsd                (Calendar Manager)"
    ;;

'-kill')
	if [ -f /usr/sbin/svcadm ]; then
	   svcadm disable -t $SVC_COPY
	fi

	rc_master_check

	$RC_MASTER stop

	Message 14 "done"
	Message 21 "dtlogin kill complete."
	;;

'-reset')
	rc_master_check

	$RC_MASTER reset

	Message 14 "done"
	Message 22 "dtlogin config resources reloaded."
	;;

'-p')
	rc_master_check

	$RC_MASTER update_printers 

	Message 14 "done"
	Message 23 "printer action update is complete"
	;;

*) 	
	echo " "
	Message 24 "Usage:"
	usage_error
	exit 1
	;;

esac

exit 0