hw/char/pl011: Add trace events

Add some trace events for the pl011 UART model.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1476294876-12340-5-git-send-email-peter.maydell@linaro.org

hw/char/pl011.c

@@ -11,6 +11,7 @@
 #include "hw/sysbus.h"
 #include "sysemu/char.h"
 #include "qemu/log.h"
+#include "trace.h"
 
 #define TYPE_PL011 "pl011"
 #define PL011(obj) OBJECT_CHECK(PL011State, (obj), TYPE_PL011)
@@ -58,6 +59,7 @@ static void pl011_update(PL011State *s)
     uint32_t flags;
 
     flags = s->int_level & s->int_enabled;
+    trace_pl011_irq_state(flags != 0);
     qemu_set_irq(s->irq, flags != 0);
 }
 
@@ -66,10 +68,8 @@ static uint64_t pl011_read(void *opaque, hwaddr offset,
 {
     PL011State *s = (PL011State *)opaque;
     uint32_t c;
+    uint64_t r;
 
-    if (offset >= 0xfe0 && offset < 0x1000) {
-        return s->id[(offset - 0xfe0) >> 2];
-    }
     switch (offset >> 2) {
     case 0: /* UARTDR */
         s->flags &= ~PL011_FLAG_RXFF;
@@ -84,41 +84,62 @@ static uint64_t pl011_read(void *opaque, hwaddr offset,
         }
         if (s->read_count == s->read_trigger - 1)
             s->int_level &= ~ PL011_INT_RX;
+        trace_pl011_read_fifo(s->read_count);
         s->rsr = c >> 8;
         pl011_update(s);
         if (s->chr) {
             qemu_chr_accept_input(s->chr);
         }
-        return c;
+        r = c;
+        break;
     case 1: /* UARTRSR */
-        return s->rsr;
+        r = s->rsr;
+        break;
     case 6: /* UARTFR */
-        return s->flags;
+        r = s->flags;
+        break;
     case 8: /* UARTILPR */
-        return s->ilpr;
+        r = s->ilpr;
+        break;
     case 9: /* UARTIBRD */
-        return s->ibrd;
+        r = s->ibrd;
+        break;
     case 10: /* UARTFBRD */
-        return s->fbrd;
+        r = s->fbrd;
+        break;
     case 11: /* UARTLCR_H */
-        return s->lcr;
+        r = s->lcr;
+        break;
     case 12: /* UARTCR */
-        return s->cr;
+        r = s->cr;
+        break;
     case 13: /* UARTIFLS */
-        return s->ifl;
+        r = s->ifl;
+        break;
     case 14: /* UARTIMSC */
-        return s->int_enabled;
+        r = s->int_enabled;
+        break;
     case 15: /* UARTRIS */
-        return s->int_level;
+        r = s->int_level;
+        break;
     case 16: /* UARTMIS */
-        return s->int_level & s->int_enabled;
+        r = s->int_level & s->int_enabled;
+        break;
     case 18: /* UARTDMACR */
-        return s->dmacr;
+        r = s->dmacr;
+        break;
+    case 0x3f8 ... 0x400:
+        r = s->id[(offset - 0xfe0) >> 2];
+        break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "pl011_read: Bad offset %x\n", (int)offset);
-        return 0;
+        r = 0;
+        break;
     }
+
+    trace_pl011_read(offset, r);
+    return r;
 }
 
 static void pl011_set_read_trigger(PL011State *s)
@@ -141,6 +162,8 @@ static void pl011_write(void *opaque, hwaddr offset,
     PL011State *s = (PL011State *)opaque;
     unsigned char ch;
 
+    trace_pl011_write(offset, value);
+
     switch (offset >> 2) {
     case 0: /* UARTDR */
         /* ??? Check if transmitter is enabled.  */
@@ -207,11 +230,15 @@ static void pl011_write(void *opaque, hwaddr offset,
 static int pl011_can_receive(void *opaque)
 {
     PL011State *s = (PL011State *)opaque;
+    int r;
 
-    if (s->lcr & 0x10)
-        return s->read_count < 16;
-    else
-        return s->read_count < 1;
+    if (s->lcr & 0x10) {
+        r = s->read_count < 16;
+    } else {
+        r = s->read_count < 1;
+    }
+    trace_pl011_can_receive(s->lcr, s->read_count, r);
+    return r;
 }
 
 static void pl011_put_fifo(void *opaque, uint32_t value)
@@ -225,7 +252,9 @@ static void pl011_put_fifo(void *opaque, uint32_t value)
     s->read_fifo[slot] = value;
     s->read_count++;
     s->flags &= ~PL011_FLAG_RXFE;
+    trace_pl011_put_fifo(value, s->read_count);
     if (!(s->lcr & 0x10) || s->read_count == 16) {
+        trace_pl011_put_fifo_full();
         s->flags |= PL011_FLAG_RXFF;
     }
     if (s->read_count == s->read_trigger) {

hw/char/trace-events

@@ -47,3 +47,12 @@ escc_sunkbd_event_in(int ch, const char *name, int down) "QKeyCode 0x%2.2x [%s],
 escc_sunkbd_event_out(int ch) "Translated keycode 0x%2.2x"
 escc_kbd_command(int val) "Command %d"
 escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=%01x"
+
+# hw/char/pl011.c
+pl011_irq_state(int level) "irq state %d"
+pl011_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+pl011_read_fifo(int read_count) "FIFO read, read_count now %d"
+pl011_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR %08x read_count %d returning %d"
+pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d"
+pl011_put_fifo_full(void) "FIFO now full, RXFF set"