hw/misc: add vmcoreinfo device

See docs/specs/vmcoreinfo.txt for details.

"etc/vmcoreinfo" fw_cfg entry is added when using "-device vmcoreinfo".

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

docs/specs/vmcoreinfo.txt

@@ -0,0 +1,41 @@
+=================
+VMCoreInfo device
+=================
+
+The `-device vmcoreinfo` will create a fw_cfg entry for a guest to
+store dump details.
+
+etc/vmcoreinfo
+**************
+
+A guest may use this fw_cfg entry to add information details to qemu
+dumps.
+
+The entry of 16 bytes has the following layout, in little-endian::
+
+#define VMCOREINFO_FORMAT_NONE 0x0
+#define VMCOREINFO_FORMAT_ELF 0x1
+
+    struct FWCfgVMCoreInfo {
+        uint16_t host_format;  /* formats host supports */
+        uint16_t guest_format; /* format guest supplies */
+        uint32_t size;         /* size of vmcoreinfo region */
+        uint64_t paddr;        /* physical address of vmcoreinfo region */
+    };
+
+Only full write (of 16 bytes) are considered valid for further
+processing of entry values.
+
+A write of 0 in guest_format will disable further processing of
+vmcoreinfo entry values & content.
+
+Format & content
+****************
+
+As of qemu 2.11, only VMCOREINFO_FORMAT_ELF is supported.
+
+The entry gives location and size of an ELF note that is appended in
+qemu dumps.
+
+The note format/class must be of the target bitness and the size must
+be less than 1Mb.

hw/misc/Makefile.objs

@@ -9,6 +9,7 @@ common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o
 common-obj-$(CONFIG_EDU) += edu.o
 
 common-obj-y += unimp.o
+common-obj-y += vmcoreinfo.o
 
 obj-$(CONFIG_VMPORT) += vmport.o
 

hw/misc/vmcoreinfo.c

@@ -0,0 +1,96 @@
+/*
+ * Virtual Machine coreinfo device
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * Authors: Marc-André Lureau <marcandre.lureau@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/nvram/fw_cfg.h"
+#include "hw/misc/vmcoreinfo.h"
+
+static void fw_cfg_vmci_write(void *dev, off_t offset, size_t len)
+{
+    VMCoreInfoState *s = VMCOREINFO(dev);
+
+    s->has_vmcoreinfo = offset == 0 && len == sizeof(s->vmcoreinfo)
+        && s->vmcoreinfo.guest_format != VMCOREINFO_FORMAT_NONE;
+}
+
+static void vmcoreinfo_reset(void *dev)
+{
+    VMCoreInfoState *s = VMCOREINFO(dev);
+
+    s->has_vmcoreinfo = false;
+    memset(&s->vmcoreinfo, 0, sizeof(s->vmcoreinfo));
+    s->vmcoreinfo.host_format = cpu_to_le16(VMCOREINFO_FORMAT_ELF);
+}
+
+static void vmcoreinfo_realize(DeviceState *dev, Error **errp)
+{
+    VMCoreInfoState *s = VMCOREINFO(dev);
+    FWCfgState *fw_cfg = fw_cfg_find();
+
+    /* Given that this function is executing, there is at least one VMCOREINFO
+     * device. Check if there are several.
+     */
+    if (!vmcoreinfo_find()) {
+        error_setg(errp, "at most one %s device is permitted",
+                   VMCOREINFO_DEVICE);
+        return;
+    }
+
+    if (!fw_cfg || !fw_cfg->dma_enabled) {
+        error_setg(errp, "%s device requires fw_cfg with DMA",
+                   VMCOREINFO_DEVICE);
+        return;
+    }
+
+    fw_cfg_add_file_callback(fw_cfg, "etc/vmcoreinfo",
+                             NULL, fw_cfg_vmci_write, s,
+                             &s->vmcoreinfo, sizeof(s->vmcoreinfo), false);
+
+    qemu_register_reset(vmcoreinfo_reset, dev);
+}
+
+static const VMStateDescription vmstate_vmcoreinfo = {
+    .name = "vmcoreinfo",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_BOOL(has_vmcoreinfo, VMCoreInfoState),
+        VMSTATE_UINT16(vmcoreinfo.host_format, VMCoreInfoState),
+        VMSTATE_UINT16(vmcoreinfo.guest_format, VMCoreInfoState),
+        VMSTATE_UINT32(vmcoreinfo.size, VMCoreInfoState),
+        VMSTATE_UINT64(vmcoreinfo.paddr, VMCoreInfoState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static void vmcoreinfo_device_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->vmsd = &vmstate_vmcoreinfo;
+    dc->realize = vmcoreinfo_realize;
+    dc->hotpluggable = false;
+}
+
+static const TypeInfo vmcoreinfo_device_info = {
+    .name          = VMCOREINFO_DEVICE,
+    .parent        = TYPE_DEVICE,
+    .instance_size = sizeof(VMCoreInfoState),
+    .class_init    = vmcoreinfo_device_class_init,
+};
+
+static void vmcoreinfo_register_types(void)
+{
+    type_register_static(&vmcoreinfo_device_info);
+}
+
+type_init(vmcoreinfo_register_types)

include/hw/misc/vmcoreinfo.h

@@ -0,0 +1,46 @@
+/*
+ * Virtual Machine coreinfo device
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * Authors: Marc-André Lureau <marcandre.lureau@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+#ifndef VMCOREINFO_H
+#define VMCOREINFO_H
+
+#include "hw/qdev.h"
+
+#define VMCOREINFO_DEVICE "vmcoreinfo"
+#define VMCOREINFO(obj) OBJECT_CHECK(VMCoreInfoState, (obj), VMCOREINFO_DEVICE)
+
+#define VMCOREINFO_FORMAT_NONE 0x0
+#define VMCOREINFO_FORMAT_ELF 0x1
+
+/* all fields are little-endian */
+typedef struct FWCfgVMCoreInfo {
+    uint16_t host_format; /* set on reset */
+    uint16_t guest_format;
+    uint32_t size;
+    uint64_t paddr;
+} QEMU_PACKED FWCfgVMCoreInfo;
+
+typedef struct VMCoreInfoState {
+    DeviceClass parent_obj;
+
+    bool has_vmcoreinfo;
+    FWCfgVMCoreInfo vmcoreinfo;
+} VMCoreInfoState;
+
+/* returns NULL unless there is exactly one device */
+static inline VMCoreInfoState *vmcoreinfo_find(void)
+{
+    Object *o = object_resolve_path_type("", VMCOREINFO_DEVICE, NULL);
+
+    return o ? VMCOREINFO(o) : NULL;
+}
+
+#endif