vhost_virtqueue_stop() gets avail index value from the backend,
except if the backend is not responding.
It happens when the backend crashes, and in this case, internal
state of the virtio queue is inconsistent, making packets
to corrupt the vring state.
With a Linux guest, it results in following error message on
backend reconnection:
[ 22.444905] virtio_net virtio0: output.0:id 0 is not a head!
[ 22.446746] net enp0s3: Unexpected TXQ (0) queue failure: -5
[ 22.476360] net enp0s3: Unexpected TXQ (0) queue failure: -5
Fixes: 283e2c2adc ("net: virtio-net discards TX data after link down")
Cc: qemu-stable@nongnu.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2ae39a113a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In case of backend crash, it is not possible to restore internal
avail index from the backend value as vhost_get_vring_base
callback fails.
This patch provides a new interface to restore internal avail index
from the vring used index, as done by some vhost-user backend on
reconnection.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2d4ba6cc74)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The ITS is not fully properly reset at the moment. Caches are
not emptied.
After a reset, in case we attempt to save the state before
the bound devices have registered their MSIs and after the
1st level table has been allocated by the ITS driver
(device BASER is valid), the first level entries are still
invalid. If the device cache is not empty (devices registered
before the reset), vgic_its_save_device_tables fails with -EINVAL.
This causes a QEMU abort().
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: wanghaibin <wanghaibin.wang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 8a7348b5d6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The current code checks if the next block exceeds the size of the card.
This generates an error while reading the last block of the card.
Do the out-of-bounds check when starting to read a new block to fix this.
This issue became visible with increased error checking in Linux 4.13.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20170916091611.10241-1-m.olbrich@pengutronix.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 8573378e62)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since FlatViews are shared now and ASes not, this gets rid of
address_space_init_shareable().
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-17-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b516572f31)
Conflicts:
target/arm/cpu.c
* drop context deps on 1d2091bc and 1e577cc7
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fixes e2b6c17 (kvmclock: update system_time_msr address forcibly)
which makes a call to get the latest value of the address
stored in system_timer_msr, but then uses the old address anyway.
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
Message-Id: <59b67db0bd15a46ab47c3aa657c81a4c11f168ea.1506702472.git.Jim.Somerville@windriver.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 346b1215b1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Valgrind detects an invalid read operation when hot-plugging of an
USB device fails:
$ valgrind x86_64-softmmu/qemu-system-x86_64 -device usb-ehci -nographic -S
==30598== Memcheck, a memory error detector
==30598== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==30598== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info
==30598== Command: x86_64-softmmu/qemu-system-x86_64 -device usb-ehci -nographic -S
==30598==
QEMU 2.10.50 monitor - type 'help' for more information
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
==30598== Invalid read of size 8
==30598== at 0x60EF50: object_unparent (object.c:445)
==30598== by 0x580F0D: usb_try_create_simple (bus.c:346)
==30598== by 0x581BEB: usb_claim_port (bus.c:451)
==30598== by 0x582310: usb_qdev_realize (bus.c:257)
==30598== by 0x4CB399: device_set_realized (qdev.c:914)
==30598== by 0x60E26D: property_set_bool (object.c:1886)
==30598== by 0x61235E: object_property_set_qobject (qom-qobject.c:27)
==30598== by 0x61000F: object_property_set_bool (object.c:1162)
==30598== by 0x4567C3: qdev_device_add (qdev-monitor.c:630)
==30598== by 0x456D52: qmp_device_add (qdev-monitor.c:807)
==30598== by 0x470A99: hmp_device_add (hmp.c:1933)
==30598== by 0x3679C3: handle_hmp_command (monitor.c:3123)
The object_unparent() here is not necessary anymore since commit
69382d8b3e ("qdev: Fix object reference leak in case device.realize()
fails"), so let's remove it now.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1506526106-30971-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit f3b2bea3c7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch is a follow up on the discussions made in patch
"hw/ppc: disable hotplug before CAS is completed" that can be
found at [1].
At this moment, we do not support CPU/memory hotplug in early
boot stages, before CAS. When a hotplug occurs, the event is logged
in an internal RTAS event log queue and an IRQ pulse is fired. In
regular conditions, the guest handles the interrupt by executing
check_exception, fetching the generated hotplug event and enabling
the device for use.
In early boot, this IRQ isn't caught (SLOF does not handle hotplug
events), leaving the event in the rtas event log queue. If the guest
executes check_exception due to another hotplug event, the re-assertion
of the IRQ ends up de-queuing the first hotplug event as well. In short,
a device hotplugged before CAS is considered coldplugged by SLOF.
This leads to device misbehavior and, in some cases, guest kernel
Ooops when trying to unplug the device.
A proper fix would be to turn every device hotplugged before CAS
as a colplugged device. This is not trivial to do with the current
code base though - the FDT is written in the guest memory at
ppc_spapr_reset and can't be retrieved without adding extra state
(fdt_size for example) that will need to managed and migrated. Adding
the hotplugged DT in the middle of CAS negotiation via the updated DT
tree works with CPU devs, but panics the guest kernel at boot. Additional
analysis would be necessary for LMBs and PCI devices. There are
questions to be made in QEMU/SLOF/kernel level about how we can make
this change in a sustainable way.
With Linux guests, a fix would be the kernel executing check_exception
at boot time, de-queueing the events that happened in early boot and
processing them. However, even if/when the newer kernels start
fetching these events at boot time, we need to take care of older
kernels that won't be doing that.
This patch works around the situation by issuing a CAS reset if a hotplugged
device is detected during CAS:
- the DRC conditions that warrant a CAS reset is the same as those that
triggers a DRC migration - the DRC must have a device attached and
the DRC state is not equal to its ready_state. With that in mind, this
patch makes use of 'spapr_drc_needed' to determine if a CAS reset
is needed.
- In the middle of CAS negotiations, the function
'spapr_hotplugged_dev_before_cas' goes through all the DRCs to see
if there are any DRC that requires a reset, using spapr_drc_needed. If
that happens, returns '1' in 'spapr_h_cas_compose_response' which will set
spapr->cas_reboot to true, causing the machine to reboot.
No changes are made for coldplug devices.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg02855.html
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 10f12e6450)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This reverts commit 153eba4726.
This patch prevents PCI passthrough hotplug on Xen. Even if the Xen tool
stack prepares its own ACPI tables, we still rely on QEMU for hotplug
ACPI notifications.
The original issue is fixed by the two previous patch:
hw/acpi: Limit hotplug to root bus on legacy mode
hw/acpi: Move acpi_set_pci_info to pcihp
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2bed1ba77f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL
being set on a PCI bus that supports ACPI hotplug. It should work
regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen).
So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation
part from QEMU's ACPI table generator.
To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs
to be set, but this was done only when ACPI tables are built which is
not needed for a Xen guest. The need for the property starts with commit
"pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice"
(f0c9d64a68).
Adding find_i440fx into stubs so that mips-softmmu target can be built.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit ab938ae43f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit f5855994fe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
v9fs_do_readdir_with_stat() should check for a maximum buffer size
before an attempt to marshal gathered data. Otherwise, buffers assumed
as misconfigured and the transport would be broken.
The patch brings v9fs_do_readdir_with_stat() in conformity with
v9fs_do_readdir() behavior.
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
[groug, regression caused my commit 8d37de41ca # 2.10]
Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit 772a73692e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The third parameter of v9fs_co_name_to_path() must not contain `/'
character.
The issue is most likely related to 9p2000.u protocol only.
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
[groug, regression caused by commit f57f587857 # 2.10]
Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit 4d8bc7334b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If the client is using 9p2000.u, the following occurs:
$ cd ${virtfs_shared_dir}
$ mkdir -p a/b/c
$ ls a/b
ls: cannot access 'a/b/a': No such file or directory
ls: cannot access 'a/b/b': No such file or directory
a b c
instead of the expected:
$ ls a/b
c
This is a regression introduced by commit f57f5878578a;
local_name_to_path() now resolves ".." and "." in paths,
and v9fs_do_readdir_with_stat()->stat_to_v9stat() then
copies the basename of the resulting path to the response.
With the example above, this means that "." and ".." are
turned into "b" and "a" respectively...
stat_to_v9stat() currently assumes it is passed a full
canonicalized path and uses it to do two different things:
1) to pass it to v9fs_co_readlink() in case the file is a symbolic
link
2) to set the name field of the V9fsStat structure to the basename
part of the given path
It only has two users: v9fs_stat() and v9fs_do_readdir_with_stat().
v9fs_stat() really needs 1) and 2) to be performed since it starts
with the full canonicalized path stored in the fid. It is different
for v9fs_do_readdir_with_stat() though because the name we want to
put into the V9fsStat structure is the d_name field of the dirent
actually (ie, we want to keep the "." and ".." special names). So,
we only need 1) in this case.
This patch hence adds a basename argument to stat_to_v9stat(), to
be used to set the name field of the V9fsStat structure, and moves
the basename logic to v9fs_stat().
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
(groug, renamed old name argument to path and updated changelog)
Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit 6069537f43)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU currently aborts with an assertion message when the user is trying
to remove a dscm1xxxx again:
$ aarch64-softmmu/qemu-system-aarch64 -S -M integratorcp -nographic
QEMU 2.9.93 monitor - type 'help' for more information
(qemu) device_add dscm1xxxx,id=xyz
(qemu) device_del xyz
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)
Looks like this device has to be wired up in code and is not meant
to be hot-pluggable, so let's mark it with user_creatable = false.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1503543783-17192-1-git-send-email-thuth@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 4c93950659)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU currently shows some unexpected behavior when the user trys to
do a "device_add digic" on an unrelated ARM machine like integratorcp
in "-nographic" mode (the device_add command does not immediately
return to the monitor prompt), and trying to "device_del" the device
later results in a "qemu/qdev-monitor.c:872:qdev_unplug: assertion
failed: (hotplug_ctrl)" error condition.
Looking at the realize function of the device, it uses serial_hds
directly and this means that the device can not be added a second
time, so let's simply mark it with "user_creatable = false" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit f58f25599b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The s390-ipl device can not be created by the user, since it is meant only
to be instantiated once internally to load the ROMs and kernel. If the user
tries to do a "device_add s390-ipl" via the monitor later, QEMU aborts with
a "ROM images must be loaded at startup" error message.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1502861458-30270-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 0d4fa4996f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU currently aborts when the user tries to hot-unplug a diag288
device:
$ qemu-system-s390x -nographic -nodefaults -S -monitor stdio
QEMU 2.9.92 monitor - type 'help' for more information
(qemu) device_add diag288,id=x
(qemu) device_del x
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)
The device is not designed as hot-pluggable (it should only be used
via the "-watchdog" parameter), so let's simply remove the possibility
to hotplug it to prevent that users can run into this ugly situation.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1502892528-22618-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 84ebd3e8c7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While loading kernel via multiboot-v1 image, (flags & 0x00010000)
indicates that multiboot header contains valid addresses to load
the kernel image. These addresses are used to compute kernel
size and kernel text offset in the OS image. Validate these
address values to avoid an OOB access issue.
This is CVE-2017-14167.
Reported-by: Thomas Garnier <thgarnie@google.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20170907063256.7418-1-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit ed4f86e8b6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Instead pass around the address (aka offset into vga memory).
Add vga_read_* helper functions which apply vbe_size_mask to
the address, to make sure the address stays within the valid
range, similar to the cirrus blitter fixes (commits ffaf857778
and 026aeffcb4).
Impact: DoS for privileged guest users. qemu crashes with
a segfault, when hitting the guard page after vga memory
allocation, while reading vga memory for display updates.
Fixes: CVE-2017-13672
Cc: P J P <ppandit@redhat.com>
Reported-by: David Buchanan <d@vidbuchanan.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170828122906.18993-1-kraxel@redhat.com
(cherry picked from commit 3d90c62548)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
vga display update mis-calculated the region for the dirty bitmap
snapshot in case split screen mode is used. This can trigger an
assert in cpu_physical_memory_snapshot_get_dirty().
Impact: DoS for privileged guest users.
Fixes: CVE-2017-13673
Fixes: fec5e8c92b
Cc: P J P <ppandit@redhat.com>
Reported-by: David Buchanan <d@vidbuchanan.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170828123307.15392-1-kraxel@redhat.com
(cherry picked from commit e65294157d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to SPC-3 INQUIRY and REQUEST SENSE should return GOOD
even on unsupported LUNS.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Message-Id: <1503049022-14749-1-git-send-email-hare@suse.de>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Fixes: ded6ddc5a7
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
(cherry picked from commit b07fbce634)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
vhost registers a MemoryListener where it adds and removes references
to MemoryRegions as the MemoryRegionSections pass through. The
region_add callback is invoked for each existing section when the
MemoryListener is registered, but unregistering the MemoryListener
performs no reciprocal region_del callback. It's therefore the
owner of the MemoryListener's responsibility to cleanup any persistent
changes, such as these memory references, after unregistering.
The consequence of this bug is that if we have both a vhost device
and a vfio device, the vhost device will reference any mmap'd MMIO of
the vfio device via this MemoryListener. If the vhost device is then
removed, those references remain outstanding. If we then attempt to
remove the vfio device, it never gets finalized and the only way to
release the kernel file descriptors is to terminate the QEMU process.
Fixes: dfde4e6e1a ("memory: add ref/unref calls")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org # v1.6.0+
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit ee4c112846)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU currently exits unexpectedly when the user accidentially
tries to do something like this:
$ aarch64-softmmu/qemu-system-aarch64 -S -M integratorcp -nographic
QEMU 2.9.93 monitor - type 'help' for more information
(qemu) device_add allwinner-a10
Unsupported NIC model: smc91c111
Exiting just due to a "device_add" should not happen. Looking closer
at the the realize and instance_init function of this device also
reveals that it is using serial_hds and nd_table directly there, so
this device is clearly not creatable by the user and should be marked
accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1503416789-32080-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit dc89a180ca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fix the following warning:
/home/pranith/qemu/hw/intc/arm_gicv3_kvm.c:296:17: warning: logical not is only applied to the left hand side of this bitwise operator [-Wlogical-not-parentheses]
if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) {
^ ~
/home/pranith/qemu/hw/intc/arm_gicv3_kvm.c:296:17: note: add parentheses after the '!' to evaluate the bitwise operator first
if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) {
^
/home/pranith/qemu/hw/intc/arm_gicv3_kvm.c:296:17: note: add parentheses around left hand side expression to silence this warning
if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) {
^
This logic error meant we were not setting the PTZ
bit when we should -- luckily as the comment suggests
this wouldn't have had any effects beyond making GIC
initialization take a little longer.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-id: 20170829173226.7625-1-bobby.prani@gmail.com
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 7229ec5825)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The 'm->numa_auto_assign_ram = numa_legacy_auto_assign_ram;' line
was supposed to be in pc_i440fx_2_9_machine_options() (see commit
3bfe5716 "numa: equally distribute memory on nodes"), but the
merge commit adb354dd ("Merge remote-tracking branch
'mst/tags/for_upstream' into staging") moved it to the
pc_i440fx_2_10_machine_options().
Move the line back to pc_i440fx_2_9_machine_options().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20170818190943.23858-1-ehabkost@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently aborts unexpectedly when the user tries to add and
remove a "spapr-tce-table" device:
$ qemu-system-ppc64 -nographic -S -nodefaults -monitor stdio
QEMU 2.9.92 monitor - type 'help' for more information
(qemu) device_add spapr-tce-table,id=x
(qemu) device_del x
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)
The device should not be accessable for the users at all, it's just
used internally, so mark it with user_creatable = false.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently aborts unexpectedly when a user tries to do something
like this:
$ qemu-system-ppc64 -nographic -S -nodefaults -monitor stdio
QEMU 2.9.92 monitor - type 'help' for more information
(qemu) device_add spapr-rtc,id=spapr-rtc
(qemu) device_del spapr-rtc
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)
The RTC device is not meant to be hot-pluggable - it's an internal
device only and it even should not be possible to create it a
second time with the "-device" parameter, so let's mark this
with "user_creatable = false".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently crashes when trying to use a 'pc-dimm' on the pseries
machine without specifying its 'memdev' property. This happens because
pc_dimm_get_memory_region() does not check whether the 'memdev' property
has properly been set by the user. Looking closer at this function, it's
also obvious that it is using &error_abort to call another function - and
this is bad in a function that is used in the hot-plugging calling chain
since this can also cause QEMU to exit unexpectedly.
So let's fix these issues in a proper way now: Add a "Error **errp"
parameter to pc_dimm_get_memory_region() which we use in case the 'memdev'
property has not been set by the user, and which we can use instead of
the &error_abort, and change the callers of get_memory_region() to make
use of this "errp" parameter for proper error checking.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In case of in-kernel memory hot unplug, when the guest is not able
to remove all the LMBs that are requested for removal, it will add back
any LMBs that have been successfully removed. The DR Connectors of
these LMBs wouldn't have been unconfigured and hence the addition of
these LMBs will result in configure-connector call being issued on
LMB DR connectors that are already in configured state. Such
configure-connector calls will fail resulting in a DIMM which is
partially unplugged.
This however worked till recently before we overhauled the DRC
implementation in QEMU. Commit 9d4c0f4f0a71e: "spapr: Consolidate
DRC state variables" is the first commit where this problem shows up
as per git bisect.
Ideally guest shouldn't be issuing configure-connector call on an
already configured DR connector. However for now, work around this in
QEMU by allowing configure-connector to be called multiple times for
all types of DR connectors.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Corrected buglet that would have initialized fdt pointers ready
for reading on a device not present at reset]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mmio-interface device is not something we want to allow
users to create on the command line:
* it is intended as an implementation detail of the memory
subsystem, which gets created and deleted by that
subsystem on demand; it makes no sense to create it
by hand on the command line
* it uses a pointer property 'host_ptr' which can't be
set on the command line
Mark the device as not user_creatable to avoid confusion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1502807418-9994-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Thomas Huth <thuth@redhat.com>
This adds mmio-exec property to workaround the migration bug.
When enabled the migration is blocked and will return an error.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1502438052-5117-1-git-send-email-frederic.konrad@adacore.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently abort()s if the user tries to specify the mmio_interface
device without parameters:
x86_64-softmmu/qemu-system-x86_64 -nographic -device mmio_interface
qemu-system-x86_64: /home/thuth/devel/qemu/util/error.c:57: error_setv:
Assertion `*errp == ((void *)0)' failed.
Aborted (core dumped)
This happens because the realize function is trying to set the errp
twice in this case. After setting an error, the realize function
should immediately return instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If blk_getlength() fails in virtio_blk_update_config() consider the disk
image length to be 0 bytes.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170808122251.29815-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block backend changed in a way that flushing empty CDROM drives now
crashes. Amend IDE to avoid doing so until the root problem can be
addressed for 2.11.
Original patch by John Snow <jsnow@redhat.com>.
Reported-by: Kieron Shorrock <kshorrock@paloaltonetworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170809160212.29976-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The unicast case in h_signal_sys_reset() seems to be broken:
rather than selecting the target CPU, it looks like it will pick
either the first CPU or fail to find one at all.
Fix it by using the search function rather than open coding the
search.
This was found by inspection; the code appears to be unused because
the Linux kernel only uses the broadcast target.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
object_property_add_child() can only fail in two cases:
- the child already has a parent, which shouldn't happen since the DRC was
allocated a few lines above
- the parent already has a child with the same name, which would mean the
caller tries to create a DRC that already exists
In both case, this is a QEMU bug and we should abort.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It turns out there's a way to setup SHPC on Q35: just put
a PCI to PCI bridge behind a DMI to PCI one. Our _OSC is
thus incorrect.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZiN4IAAoJECgfDbjSjVRp6+gH/21G0tjqatydSjrosT+ZZH02
KnEBAVD8S01naiZjqYOKdlScBYaTeMWlaoAN2zRQYedpD9H2otseOV1Hjqw7wlcf
5gxbnivK79nhBe1fXxrWe3wJt41nR3N9045S9OAn6g0wjLOEI0M91+wSu1aP+pGN
X8V3uCBagJeggFdfpVi7IyaT2D/bTB2H1avIKwkzE68bqfEyD2d/AxV84ugXL5II
V3xndpBC1S2rnYKAs1Glg1mwP4CiWItKPZ+duiqiFeJ+Co2/NbZudCwU/hxS2tei
lflh3L979wTn3AJFm2FVnecpXVGLkf43QKRATLqN+K4xvwMA+mXPSIXZyjalB4w=
=mIAB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio: fix for rc2
It turns out there's a way to setup SHPC on Q35: just put
a PCI to PCI bridge behind a DMI to PCI one. Our _OSC is
thus incorrect.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 07 Aug 2017 22:39:20 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
cpu: add APIs to allocate/free CPU environment
hw/i386: allow SHPC for Q35 machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The LUN0 emulation is just that, an emulation for a non-existing
LUN0. So we should be returning LUN_NOT_SUPPORTED for any request
coming from any other LUN.
And we should be aborting unhandled commands with INVALID OPCODE,
not LUN NOT SUPPORTED.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Message-Id: <1501835795-92331-4-git-send-email-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unmask previously masked SHPC feature in _OSC method.
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virt-2.10 machine type.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1502106581-11714-1-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Maxime Coquelin