'awaiting_release' indicates that the host has requested an unplug of the
device attached to the DRC, but the guest has not (yet) put the device
into a state where it is safe to complete removal.
1. Rename it to 'unplug_requested' which to me at least is clearer
2. Remove the ->release_pending() method used to check this from outside
spapr_drc.c. The method only plausibly has one implementation, so use
a plain function (spapr_drc_unplug_requested()) instead.
3. Remove it from the migration stream. Attempting to migrate mid-unplug
is broken not just for spapr - in general management has no good way to
determine if the device should be present on the destination or not. So,
until that's fixed, there's no point adding extra things to the stream.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
This function has two unused parameters - remove them.
It also sets awaiting_release on all paths, except one. On that path
setting it is harmless, since it will be immediately cleared by
spapr_drc_release(). So factor it out of the if statements.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The awaiting_allocation flag in the DRC was introduced by aab9913
"spapr_drc: Prevent detach racing against attach for CPU DR", allegedly to
prevent a guest crash on racing attach and detach. Except.. information
from the BZ actually suggests a qemu crash, not a guest crash. And there
shouldn't be a problem here anyway: if the guest has already moved the DRC
away from UNUSABLE state, the detach would already be deferred, and if it
hadn't it should be safe to detach it (the guest should fail gracefully
when it attempts to change the allocation state).
I think this was probably just a bandaid for some other problem in the
state management. So, remove awaiting_allocation and associated code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
When migrating a guest which has already had devices hotplugged,
libvirt typically starts the destination qemu with -incoming defer,
adds those hotplugged devices with qmp, then initiates the incoming
migration.
This causes problems for the management of spapr DRC state. Because
the device is treated as hotplugged, it goes into a DRC state for a
device immediately after it's plugged, but before the guest has
acknowledged its presence. However, chances are the guest on the
source machine *has* acknowledged the device's presence and configured
it.
If the source has fully configured the device, then DRC state won't be
sent in the migration stream: for maximum migration compatibility with
earlier versions we don't migrate DRCs in coldplug-equivalent state.
That means that the DRC effectively changes state over the migrate,
causing problems later on.
In addition, logging hotplug events for these devices isn't what we
want because a) those events should already have been issued on the
source host and b) the event queue should get wiped out by the
incoming state anyway.
In short, what we really want is to treat devices added before an
incoming migration as if they were coldplugged.
To do this, we first add a spapr_drc_hotplugged() helper which
determines if the device is hotplugged in the sense relevant for DRC
state management. We only send hotplug events when this is true.
Second, when we add a device which isn't hotplugged in this sense, we
force a reset of the DRC state - this ensures the DRC is in a
coldplug-equivalent state (there isn't usually a system reset between
these device adds and the incoming migration).
This is based on an earlier patch by Laurent Vivier, cleaned up and
extended.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The rtas_error_log structure is marked packed, which strongly suggests its
precise layout is important to match an external interface. Along with
that one could expect it to have a fixed endianness to match the same
interface. That used to be the case - matching the layout of PAPR RTAS
event format and requiring BE fields.
Now, however, it's only used embedded within sPAPREventLogEntry with the
fields in native order, since they're processed internally.
Clear that up by removing the nested structure in sPAPREventLogEntry.
struct rtas_error_log is moved back to spapr_events.c where it is used as
a temporary to help convert the fields in sPAPREventLogEntry to the correct
in memory format when delivering an event to the guest.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In racing situations between hotplug events and migration operation,
a rtas hotplug event could have not yet be delivered to the source
guest when migration is started. In this case the pending_events of
spapr state need be transmitted to the target so that the hotplug
event can be finished on the target.
To achieve the minimal VMSD possible to migrate the pending_events list,
this patch makes the changes in spapr_events.c:
- 'log_type' of sPAPREventLogEntry struct deleted. This information can be
derived by inspecting the rtas_error_log summary field. A new function
called 'spapr_event_log_entry_type' was added to retrieve the type of
a given sPAPREventLogEntry.
- sPAPREventLogEntry, epow_log_full and hp_log_full were redesigned. The
only data we're going to migrate in the VMSD is the event log data itself,
which can be divided in two parts: a rtas_error_log header and an extended
event log field. The rtas_error_log header contains information about the
size of the extended log field, which can be used inside VMSD as the size
parameter of the VBUFFER_ALOC field that will store it. To allow this use,
the header.extended_length field must be exposed inline to the VMSD instead
of embedded into a 'data' field that holds everything. With this in mind,
the following changes were done:
* a new 'header' field was added to sPAPREventLogEntry. This field holds a
a struct rtas_error_log inline.
* the declaration of the 'rtas_error_log' struct was moved to spapr.h
to be visible to the VMSD macros.
* 'data' field of sPAPREventLogEntry was renamed to 'extended_log' and
now holds only the contents of the extended event log.
* 'struct rtas_error_log hdr' were taken away from both epow_log_full
and hp_log_full. This information is now available at the header field of
sPAPREventLogEntry.
* epow_log_full and hp_log_full were renamed to epow_extended_log and
hp_extended_log respectively. This rename makes it clearer to understand
the new purpose of both structures: hold the information of an extended
event log field.
* spapr_powerdown_req and spapr_hotplug_req_event now creates a
sPAPREventLogEntry structure that contains the full rtas log entry.
* rtas_event_log_queue and rtas_event_log_dequeue now receives a
sPAPREventLogEntry pointer as a parameter instead of a void pointer.
- the endianess of the sPAPREventLogEntry header is now native instead
of be32. We can use the fields in native endianess internally and write
them in be32 in the guest physical memory inside 'check_exception'. This
allows the VMSD inside spapr.c to read the correct size of the
entended_log field.
- inside spapr.c, pending_events is put in a subsection in the spapr state
VMSD to make sure migration across different versions is not broken.
A small change in rtas_event_log_queue and rtas_event_log_dequeue were also
made: instead of calling qdev_get_machine(), both functions now receive
a pointer to the sPAPRMachineState. This pointer is already available in
the callers of these functions and we don't need to waste resources
calling qdev() again.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add new utility functions which both initialize a RAM
MemoryRegion and arrange for its contents to be migrated;
we give thes the memory_region_init_ram(), memory_region_init_rom()
and memory_region_init_rom_device() names that we just freed up
by renaming the old implementations to _nomigrate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-6-git-send-email-peter.maydell@linaro.org
Add a documentation comment for memory_region_allocate_system_memory().
In particular, the reason for this function's existence and the
requirement on board code to call it exactly once are non-obvious.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-2-git-send-email-peter.maydell@linaro.org
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2bOV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce guarded storage support for KVM guests on s390.
We need to enable the capability, extend machine check validity,
sigp store-additional-status-at-address, and migration.
The feature is fenced for older machine type versions.
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some new guest features have been introduced recently. Let's wire
them up in the CPU model.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split patch]
During migration we should transfer ais states to the target guest.
This patch introduces a subsection to kvm_s390_flic_vmstate and new
vmsd for qemu_flic. The ais states need to be migrated only when
ais is supported.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Instead of passing around a pointer to ORB let us simplify some
function signatures by using the previously introduced ORB saved at the
subchannel (SubchDev).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-7-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Turn on migration for the channel subsystem for the next machine. For
legacy machines we still have to do things the old way.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-6-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Since we are going to need a migration compatibility breaking change to
activate ChannelSubSys migration let us use the opportunity to introduce
ORB to the SubchDev before that (otherwise we would need separate
handling e.g. a compat property).
The ORB will be useful for implementing IDA, or async handling of
subchannel work.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-5-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently the migration of the channel subsystem (css) is only partial
and is done by the virtio ccw proxies -- the only migratable css devices
existing at the moment.
With the current work on emulated and passthrough devices we need to
decouple the migration of the channel subsystem state from virtio ccw,
and have a separate section for it. A new section however necessarily
breaks the migration compatibility.
So let us introduce a switch at the machine class, and put it in 'off'
state for now. We will turn the switch 'on' for future machines once all
preparations are met. For compatibility machines the switch will stay
'off'.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's use the new inject_airq callback of flic to inject adapter
interrupts. For kvm case, if the kernel flic doesn't support the new
interface, the irq routine remains unchanged. For non-kvm case,
qemu-flic handles the suppression process.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently, we do nothing for the SIC instruction, but we need to
implement it properly. Let's add proper handling in the backend code.
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's introduce a specialized way to inject adapter interrupts that,
unlike the common interrupt injection method, allows to take the
characteristics of the adapter into account.
For adapters subject to AIS facility:
- for non-kvm case, we handle the suppression for a given ISC in QEMU.
- for kvm case, we pass adapter id to kvm to do airq injection.
Add add tracepoint for suppressed airq and suppressing airq.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In order to emulate the adapter interruption suppression (AIS)
facility properly, the guest needs to be able to modify the AIS mask.
Interrupt suppression will be handled via the flic (for kvm, via a
recently introduced kernel backend; for !kvm, in the flic code), so
let's introduce a method to change the mode via the flic interface.
We introduce the 'simm' and 'nimm' fields to QEMUS390FLICState
to store interruption modes for each ISC. Each bit in 'simm' and
'nimm' targets one ISC, and collaboratively indicate three modes:
ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This
interface can initiate most transitions between the states; transition
from SINGLE-Interruption to NO-Interruptions via adapter interrupt
injection will be introduced in a following patch. The meaningful
combinations are as follows:
interruption mode | simm bit | nimm bit
------------------|----------|----------
ALL | 0 | 0
SINGLE | 1 | 0
NO | 1 | 1
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce a new 'flags' field to IoAdapter to contain further
characteristics of the adapter, like whether the adapter is subject to
adapter-interruption suppression.
For the kvm case, pass this value in the 'flags' field when
registering an adapter.
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Storage attributes device, like we have for storage keys.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The remaining non-const ones are in e1000e which modifies description at
runtime. They can be addressed separatedly.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-6-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This property can be used to replace the object_property_add_link in
device code, to add a link to other objects, which is a common pattern.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-4-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
link's check callback is supposed to verify/permit setting it,
however currently nothing restricts it from misusing it
and modifying target object from within.
Make sure that readonly semantics are checked by compiler
to prevent callback's misuse.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This finishes QOM'fication of IOMMUMemoryRegion by introducing
a IOMMUMemoryRegionClass. This also provides a fastpath analog for
IOMMU_MEMORY_REGION_GET_CLASS().
This makes IOMMUMemoryRegion an abstract class.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170711035620.4232-3-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This defines new QOM object - IOMMUMemoryRegion - with MemoryRegion
as a parent.
This moves IOMMU-related fields from MR to IOMMU MR. However to avoid
dymanic QOM casting in fast path (address_space_translate, etc),
this adds an @is_iommu boolean flag to MR and provides new helper to
do simple cast to IOMMU MR - memory_region_get_iommu. The flag
is set in the instance init callback. This defines
memory_region_is_iommu as memory_region_get_iommu()!=NULL.
This switches MemoryRegion to IOMMUMemoryRegion in most places except
the ones where MemoryRegion may be an alias.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20170711035620.4232-2-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Several minor cleanups from Greg Kurz
* Fix for migration of pseries-2.7 and earlier machine types
* More reworking of the DRC hotplug code, fixing several problems
though there are still more to go
* Fixes for CPU family / alias handling on POWER9
* Preliminary patches for POWER9 XIVE (new interrupt controller)
support
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=8Wy2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170711' into staging
ppc patch queue 2017-07-11
* Several minor cleanups from Greg Kurz
* Fix for migration of pseries-2.7 and earlier machine types
* More reworking of the DRC hotplug code, fixing several problems
though there are still more to go
* Fixes for CPU family / alias handling on POWER9
* Preliminary patches for POWER9 XIVE (new interrupt controller)
support
* Assorted other fixes
# gpg: Signature made Tue 11 Jul 2017 05:35:16 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170711:
spapr: populate device tree depending on XIVE_EXPLOIT option
spapr: introduce the XIVE_EXPLOIT option in CAS
ppc/kvm: have the "family" CPU alias to point to TYPE_HOST_POWERPC_CPU
spapr: Only report host/guest IOMMU page size mismatches on KVM
spapr: fix memory hotplug error path
target/ppc: Add debug function for radix mmu translation
target/ppc: Refactor tcg radix mmu code
spapr: Use unplug_request for PCI hot unplug
spapr: Remove unnecessary differences between hotplug and coldplug paths
spapr: Add DRC release method
spapr: Uniform DRC reset paths
spapr: Leave DR-indicator management to the guest
target-ppc: SPR_BOOKE_ESR not set on FP exceptions
spapr: fix migration to pseries machine < 2.8
spapr: fix bogus function name in comment
spapr: refresh "platform-specific" hcalls comment
spapr: make spapr_populate_hotplug_cpu_dt() static
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add documentation comments describing the public API of the
ptimer countdown timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ast2400 contains two and the ast2500 contains three watchdogs.
Add this information to the AspeedSoCInfo and realise the correct number
of watchdogs for that each SoC type.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On POWER9, the Client Architecture Support (CAS) negotiation process
determines whether the guest operates in XIVE Legacy compatibility
(the former POWER8 interrupt model) or in XIVE exploitation mode (the
newer POWER9 interrupt model).
Bit 7 of Byte 23 of vector 5 is used for this purpose.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_drc_attach() has a 'coldplug' parameter which sets the DRC into
configured state initially, instead of the usual ISOLATED/UNUSABLE state.
It turns out this is unnecessary: although coldplugged devices do need to
be in CONFIGURED state once the guest starts, that will already be
accomplished by the reset code which will move DRCs for already plugged
devices into a coldplug equivalent state.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
At the moment, spapr_drc_release() has an ugly switch on the DRC type to
call the right, device-specific release function. This cleans it up by
doing that via a proper QOM method.
It's still arguably an abstraction violation for the DRC code to call into
the specific device code, but one mess at a time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
We have more of these since the addition of KVMPPC_H_LOGICAL_MEMOP in 2012.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit ff9006ddbf ("spapr: move spapr_core_[foo]plug() callbacks
close to machine code in spapr.c"), this function doesn't need to be extern
anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
VFIOGroup.device_list is effectively our reference tracking mechanism
such that we can teardown a group when all of the device references
are removed. However, we also use this list from our machine reset
handler for processing resets that affect multiple devices. Generally
device removals are fully processed (exitfn + finalize) when this
reset handler is invoked, however if the removal is triggered via
another reset handler (piix4_reset->acpi_pcihp_reset) then the device
exitfn may run, but not finalize. In this case we hit asserts when
we start trying to access PCI helpers since much of the PCI state of
the device is released. To resolve this, add a pointer to the Object
DeviceState in our common base-device and skip non-realized devices
as we iterate.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Initialize xenfb properly, as all other backends, from its own
"initialise" function.
Remove the dependency of vkbd on vfb: use qemu_console_lookup_by_index
to find the principal console (to get the size of the screen) instead of
relying on a vfb backend to be available (which adds a dependency
between the two).
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Let's vmstatify virtio_ccw_save_config and virtio_ccw_load_config for
flexibility (extending using subsections) and for fun.
To achieve this we need to hack the config_vector, which is VirtIODevice
(that is common virtio) state, in the middle of the VirtioCcwDevice state
representation. This is somewhat ugly, but we have no choice because the
stream format needs to be preserved.
Almost no changes in behavior. Exception is everything that comes with
vmstate like extra bookkeeping about what's in the stream, and maybe some
extra checks and better error reporting.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170703213414.94298-1-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
pc.h and sysemu/kvm.h are also included from common code (where
CONFIG_KVM is not available), so the #defines that depend on CONFIG_KVM
should not be declared here to avoid that anybody is using them in a
wrong way. Since we're also going to poison CONFIG_KVM for common code,
let's move them to kvm_i386.h instead. Most of the dummy definitions
from sysemu/kvm.h are also unused since the code that uses them is
only compiled for CONFIG_KVM (e.g. target/i386/kvm.c), so the unused
defines are also simply dropped here instead of being moved.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1498454578-18709-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to propagate error message better, convert shpc_init() to
Error also convert the pci_bridge_dev_initfn() to realize.
Cc: mst@redhat.com
Cc: marcel@redhat.com
Cc: armbru@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert i82801b11, io3130_upstream, io3130_downstream and
pcie_root_port devices to realize.
Cc: mst@redhat.com
Cc: marcel@redhat.com
Cc: armbru@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After the patch 'Make errp the last parameter of pci_add_capability()',
pci_add_capability() and pci_add_capability2() now do exactly the same.
So drop the wrapper pci_add_capability() of pci_add_capability2(), then
replace the pci_add_capability2() with pci_add_capability() everywhere.
Cc: pbonzini@redhat.com
Cc: rth@twiddle.net
Cc: ehabkost@redhat.com
Cc: mst@redhat.com
Cc: dmitry@daynix.com
Cc: jasowang@redhat.com
Cc: marcel@redhat.com
Cc: alex.williamson@redhat.com
Cc: armbru@redhat.com
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch enables the virtio-net tx queue size to be configurable
between 256 (the default queue size) and 1024 by the user when the
vhost-user backend is used.
Currently, the maximum tx queue size for other backends is 512 due
to the following limitations:
- QEMU backend: the QEMU backend implementation in some cases may
send 1024+1 iovs to writev.
- Vhost_net backend: there are possibilities that the guest sends
a vring_desc of memory which crosses a MemoryRegion thereby
generating more than 1024 iovs after translation from guest-physical
address in the backend.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are substantial differences in the various paths through
set_isolation_state(), both for setting to ISOLATED versus UNISOLATED
state and for logical versus physical DRCs.
So, split the set_isolation_state() method into isolate() and unisolate()
methods, and give it different implementations for the two DRC types.
Factor some minimal common checks, including for valid indicator values
(which we weren't previously checking) into rtas_set_isolation_state().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The allocation-state indicator should only actually be implemented for
"logical" DRCs, not physical ones. Factor a check for this, and also for
valid indicator state values into rtas_set_allocation_state(). Because
they don't exist for physical DRCs, there's no reason that we'd ever want
more than one method implementation, so it can just be a plain function.
In addition, the setting to USABLE and setting to UNUSABLE paths in
set_allocation_state() don't actually have much in common. So, split the
method separate functions for each parameter value (drc_set_usable()
and drc_set_unusable()).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The 'signalled' field in the DRC appears to be entirely a torturous
workaround for the fact that PCI devices were started in UNISOLATED state
for unclear reasons.
1) 'signalled' is already meaningless for logical (so far, all non PCI)
DRCs. It's always set to true (at least at any point it might be tested),
and can't be assigned any real meaning due to the way signalling works for
logical DRCs.
2) For PCI DRCs, the only time signalled would be false is when non-zero
functions of a multifunction device are hotplugged, followed by function
zero (the other way around is explicitly not permitted). In that case the
secondary function DRCs are attached, but the notification isn't sent to
the guest until function 0 is plugged.
3) signalled being false is used to allow a DRC detach to switch mode
back to ISOLATED state, which allows a secondary function to be hotplugged
then unplugged with function 0 never inserted. Without this a secondary
function starting in UNISOLATED state couldn't be detached again without
function 0 being inserted, all the functions configured by the guest, then
sent back to ISOLATED state.
4) But now that PCI DRCs start in ISOLATED state, there's nothing to be
done. If the guest doesn't get the notification, it won't switch the
device to UNISOLATED state, so nothing prevents it from being unplugged.
If the guest does move it to UNISOLATED state without the signal (due to
a manual drmgr call, for instance) then it really isn't safe to unplug it.
So, this patch removes the signalled variable and all code related to it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 5bc8d26de2 ("spapr: allocate the ICPState object from under
sPAPRCPUCore") moved ICPState objects from the machine to CPU cores.
This is an improvement since we no longer allocate ICPState objects
that will never be used. But it has the side-effect of breaking
migration of older machine types from older QEMU versions.
This patch allows spapr to register dummy "icp/server" entries to vmstate.
These entries use a dedicated VMStateDescription that can swallow and
discard state of an incoming migration stream, and that don't send anything
on outgoing migration.
As for real ICPState objects, the instance_id is the cpu_index of the
corresponding vCPU, which happens to be equal to the generated instance_id
of older machine types.
The machine can unregister/register these entries when CPUs are dynamically
plugged/unplugged.
This is only available for pseries-2.9 and older machines, thanks to a
compat property.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Server class POWER CPUs have a "compat" property, which is used to set the
backwards compatibility mode for the processor. However, this only makes
sense for machine types which don't give the guest access to hypervisor
privilege - otherwise the compatibility level is under the guest's control.
To reflect this, this removes the CPU 'compat' property and instead
creates a 'max-cpu-compat' property on the pseries machine. Strictly
speaking this breaks compatibility, but AFAIK the 'compat' option was
never (directly) used with -device or device_add.
The option was used with -cpu. So, to maintain compatibility, this
patch adds a hack to the cpu option parsing to strip out any compat
options supplied with -cpu and set them on the machine property
instead of the now deprecated cpu property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Move it into MigrationState, revert its meaning and renaming it to
send_section_footer, with a property bound to it. Same trick is played
like previous patches.
Removing savevm_skip_section_footers().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was in SaveState but now moved to MigrationState altogether, reverted
its meaning, then renamed to "send_configuration". Again, using
HW_COMPAT_2_3 for old PC/SPAPR machines, and accel_register_prop() for
xen_init().
Removing savevm_skip_configuration().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Put it into MigrationState then we can use the properties to specify
whether to enable storing global state.
Removing global_state_set_optional() since now we can use HW_COMPAT_2_3
for x86/power, and AccelClass.global_props for Xen.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce this new field for the accelerator classes so that each
specific accelerator in the future can register its own global
properties to be used further by the system. It works just like how the
old machine compatible properties do, but only tailored for
accelerators.
Introduce register_compat_props_array() for it. Export it so that it may
be used in other codes as well in the future.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-3-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have HW_COMPAT_*, however that's only bound to machines, not other
things (like accelerators). Behind it, it was register_compat_prop()
that played the trick. Let's export the function for further use
outside HW_COMPAT_* magic.
Meanwhile, move it to qdev-properties.c where seems more proper (since
it'll be used not only in machine codes).
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-2-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This introduces mmio_interface object which contains a MemoryRegion
and can be hotplugged/hotunplugged.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
We need to pass a pointer to a MemoryRegion for mmio_interface.
So this just adds that.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Cleanup: Create and use a typedef for PS2State and stop passing void
pointers. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170606112105.13331-2-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----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=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The property is defined with DEFINE_PROP_UINT32().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-21-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Modify the unsigned type for various properties to use QNUM_U64, to
avoid type casts.
There are a few empty lines added to improve code reading/style.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-18-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Change to set_default_value_enum() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wrap the Property default value (an int64_t) in a union, to prepare
for the next patch adding a uint64_t.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-17-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The rename prepares for the patch after next's DEFINE_PROP_UNSIGNED().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-16-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove dependency on qapi qtype, replace a field by a few PropertyInfo
callbacks to set the default value type (introduced in commit 4f2d3d7).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-2-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The q35 machine type currently lets the guest firmware select a 1MB, 2MB
or 8MB TSEG (basically, SMRAM) size. In edk2/OVMF, we use 8MB, but even
that is not enough when a lot of VCPUs (more than approx. 224) are
configured -- SMRAM footprint scales largely proportionally with VCPU
count.
Introduce a new property for "mch" called "extended-tseg-mbytes", which
expresses (in megabytes) the user's choice of TSEG (SMRAM) size.
Invent a new, QEMU-specific register in the config space of the DRAM
Controller, at offset 0x50, in order to allow guest firmware to query the
TSEG (SMRAM) size.
According to Intel Document Number 316966-002, Table 5-1 "DRAM Controller
Register Address Map (D0:F0)":
Warning: Address locations that are not listed are considered Intel
Reserved registers locations. Reads to Reserved registers may
return non-zero values. Writes to reserved locations may
cause system failures.
All registers that are defined in the PCI 2.3 specification,
but are not necessary or implemented in this component are
simply not included in this document. The
reserved/unimplemented space in the PCI configuration header
space is not documented as such in this summary.
Offsets 0x50 and 0x51 are not listed in Table 5-1. They are also not part
of the standard PCI config space header. And they precede the capability
list as well, which starts at 0xe0 for this device.
When the guest writes value 0xffff to this register, the value that can be
read back is that of "mch.extended-tseg-mbytes" -- unless it remains
0xffff. The guest is required to write 0xffff first (as opposed to a
read-only register) because PCI config space is generally not cleared on
QEMU reset, and after S3 resume or reboot, new guest firmware running on
old QEMU could read a guest OS-injected value from this register.
After reading the available "extended" TSEG size, the guest firmware may
actually request that TSEG size by writing pattern 11b to the ESMRAMC
register's TSEG_SZ bit-field. (The Intel spec referenced above defines
only patterns 00b (1MB), 01b (2MB) and 10b (8MB); 11b is reserved.)
On the QEMU command line, the value can be set with
-global mch.extended-tseg-mbytes=N
The default value for 2.10+ q35 machine types is 16. The value is limited
to 0xfff (4095) at the moment, purely so that the product (4095 MB) can be
stored to the uint32_t variable "tseg_size" in mch_update_smram(). Users
are responsible for choosing sensible TSEG sizes.
On 2.9 and earlier q35 machine types, the default value is 0. This lets
the 11b bit pattern in ESMRAMC.TSEG_SZ, and the register at offset 0x50,
keep their original behavior.
When "extended-tseg-mbytes" is nonzero, the new register at offset 0x50 is
set to that value on reset, for completeness.
PCI config space is migrated automatically, so no VMSD changes are
necessary.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1447027
Ref: https://lists.01.org/pipermail/edk2-devel/2017-May/010456.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a vhost-user device for SCSI. This is based
on the existing vhost-scsi implementation, but done over vhost-user
instead. It also uses a chardev to connect to the backend. Unlike
vhost-scsi (today), VMs using vhost-user-scsi can be live migrated.
To use it, start Qemu with a command line equivalent to:
qemu-system-x86_64 \
-chardev socket,id=vus0,path=/tmp/vus.sock \
-device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=...
A separate commit presents a sample application linked with libiscsi to
provide a backend for vhost-user-scsi.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-4-git-send-email-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to handle both registers and ITS tables. While
register handling is standard, ITS table handling is more
challenging since the kernel API is devised so that the
tables are flushed into guest RAM and not in vmstate buffers.
Flushing the ITS tables on device pre_save() is too late
since the guest RAM is already saved at this point.
Table flushing needs to happen when we are sure the vcpus
are stopped and before the last dirty page saving. The
right point is RUN_STATE_FINISH_MIGRATE but sometimes the
VM gets stopped before migration launch so let's simply
flush the tables each time the VM gets stopped.
For regular ITS registers we just can use vmstate pre_save()
and post_load() callbacks.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1497023553-18411-3-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before QOM-ifying the Exynos4 SoC model, move the DRAM initialization
from exynos4210.c to exynos4_boards.c because DRAM is board specific,
not SoC.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This batch contains more patches to rework the pseries machine hotplug
infrastructure, plus an assorted batch of bugfixes.
It contains a start on fixes to restore migration from older machine
types on older versions which was broken by some xics changes. There
are still a few missing pieces here, though.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=a4tH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170609' into staging
ppc patch queue 2017-06-09
This batch contains more patches to rework the pseries machine hotplug
infrastructure, plus an assorted batch of bugfixes.
It contains a start on fixes to restore migration from older machine
types on older versions which was broken by some xics changes. There
are still a few missing pieces here, though.
# gpg: Signature made Fri 09 Jun 2017 06:26:03 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170609:
Revert "spapr: fix memory hot-unplugging"
xics: drop ICPStateClass::cpu_setup() handler
xics: setup cpu at realize time
xics: pass appropriate types to realize() handlers.
xics: introduce macros for ICP/ICS link properties
hw/cpu: core.c can be compiled as common object
hw/ppc/spapr: Adjust firmware name for PCI bridges
xics: add reset() handler to ICPStateClass
pnv_core: drop reference on ICPState object during CPU realization
spapr: Rework DRC name handling
spapr: Fold spapr_phb_{add,remove}_pci_device() into their only callers
spapr: Change DRC attach & detach methods to functions
spapr: Clean up handling of DR-indicator
spapr: Clean up RTAS set-indicator
spapr: Don't misuse DR-indicator in spapr_recover_pending_dimm_state()
spapr: Clean up DR entity sense handling
pseries: Correct panic behaviour for pseries machine type
spapr: fix memory leak in spapr_memory_pre_plug()
target/ppc: fix memory leak in kvmppc_is_mem_backend_page_size_ok()
target/ppc: pass const string to kvmppc_is_mem_backend_page_size_ok()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZOZ+4AAoJECgfDbjSjVRpToYH/1vHgbv2dLtZTJm3BdBRKYWS
9oWt4drT9TdbzYL6u3zxQd6oT0FPLXKkx3ruhBtfc3GoEGO2UWGgJLEXWCLSH/pK
71iKgCB9Yr4IErjI569/fyeKS48wFEsZihzj+iQBns7gQGTbUO/GewaWV8q6CRzC
nKY8g9Z1ajH/eufgV6iSitnReAoaere4kod/5Qa5R0i/JvEx010Pe6kjQT1TYCcB
GhSe0hSIInqOYWkMt8v+2LQlAGXdopjmjcaYD/b1/IVKu2xdVPRvXNYmW9CBbMrx
xVWXQ8pNzjrJdfJZTZhAW/lkhx+AlG4KIAzOnMslTYuZ8E84ioafkmumNFPHrBw=
=TjdI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, vhost: fixes
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 08 Jun 2017 20:04:24 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pcie: fix the generic pcie root port to support migration
nvdimm acpi: fix region format interface code
vhost-user-bridge: fix iov_restore_front() warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit fe6824d126.
Conflicts hw/ppc/spapr_drc.c, because get_index() has been renamed
spapr_get_index().
This didn't fix the problem. Once the hotplug has been started
some memory is allocated and some structures are allocated.
We don't free it when we ignore the unplug, and we can't because
they can be in use by the kernel.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cpu_setup() handler is only implemented by xics_kvm, where it really
does a typical "realize" job. Moreover, the realize() handler is called
shortly after cpu_setup(), on the same path.
This patch converts xics_kvm to implement realize() instead of cpu_setup().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until recently, spapr used to allocate ICPState objects for the lifetime
of the machine. They would only be associated to vCPUs in xics_cpu_setup()
when plugging a CPU core.
Now that ICPState objects have the same lifecycle as vCPUs, it is
possible to associate them during realization.
This patch hence open-codes xics_cpu_setup() in icp_realize(). The vCPU
is passed as a property. Note that vCPU now needs to be realized first
for the IRQs to be allocated. It also needs to resetted before ICPState
realization in order to synchronize with KVM.
Since ICPState objects are freed when unrealized, xics_cpu_destroy() isn't
needed anymore and can be safely dropped.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It makes more sense to pass an IPCState * to handlers of ICPStateClass
instead of a DeviceState *, if only to benefit from compile time type
checking. The same goes with ICSStateClass.
While here, we also change the declaration of ICPStateClass in xics.h
for consistency.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These properties are part of the XICS API. They deserve to appear
explicitely in the XICS header file.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add msix state to pcie-root-ports's vmstate
in order to support migration.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Taking into account that qemu_set_irq() returns immediatly if its first
argument is NULL, icp_kvm_reset() largely duplicates icp_reset().
This patch introduces a reset() handler, so that the common logic can
be implemented in icp_reset() only.
While there we can also drop icp_kvm_realize() and icp_kvm_unrealize(). This
causes icp-kvm to be realized in icp_realize(), which sets icp->xics, but
it has no impact.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
DRC objects have a get_name method which returns the DRC name generated
when the DRC is created. Replace that with a fixed spapr_drc_name()
function which generates the name on the fly from other information. This
means:
* We get rid of a method with only one implementation, and only local
callers
* We don't have to carry the name string around for the lifetime of the
DRC
* We use information added to the class structure to generate the name
in standard format, so we don't need an explicit switch on drc type
any more
We also eliminate the 'name' property; it's basically useless since the
only information in it can easily be deduced from other things.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
DRC objects have attach & detach methods, but there's only one
implementation. Although there are some differences in its behaviour for
different DRC types, the overall structure is the same, so while we might
want different method implementations for some parts, we're unlikely to
want them for the top-level functions.
So, replace them with direct function calls.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
There are 3 types of "indicator" associated with hotplug in the PAPR spec
the "allocation state", "isolation state" and "DR-indicator". The first
two are intimately tied to the various state transitions associated with
hotplug. The DR-indicator, however, is different and simpler.
It's basically just a guest controlled variable which can be used by the
guest to flag state or problems associated with a device. The idea is that
the hypervisor can use it to present information back on management
consoles (on some machines with PowerVM it may even control physical LEDs
on the machine case associated with the relevant device).
For that reason, there's only ever likely to be a single update
implementation so the set_indicator_state method isn't useful. Replace it
with a direct function call.
While we're there, make some small associated cleanups:
* PAPR doesn't use the term "indicator state", just "DR-indicator" and
the allocation state and isolation state are also considered "indicators".
Rename things to be less confusing
* Fold set_indicator_state() and rtas_set_indicator_state() into a single
rtas_set_dr_indicator() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
DRC classes have an entity_sense method to determine (in a specific PAPR
sense) the presence or absence of a device plugged into a DRC. However,
we only have one implementation of the method, which explicitly tests for
different DRC types. This changes it to instead have different method
implementations for the two cases: "logical" and "physical" DRCs.
While we're at it, the entity sense method always returns RTAS_OUT_SUCCESS,
and the interesting value is returned via pass-by-reference. Simplify this
to directly return the value we care about
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It tests the accuracy of rtc periodic timer which is recently
improved & fixed by commit 7ffcb539a3 ("mc146818rtc: precisely count
the clock for periodic timer", 2017-05-19).
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20170527025301.23499-1-xiaoguangrong@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Accumulated patches for ppc targets and the pseries machine type.
The big thing in this batch is a start on a substantial cleanup of the
pseries hotplug mechanisms, which were pretty confusing. For now
these shouldn't cause substantial behavioural changes, but I am hoping
these lead to clearer code and eventually to fixes for the bugs we
have in hotplug handling, particularly when hotplug and migration are
combined.
The remaining patches are mostly bugfixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QDWB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170606' into staging
ppc patch queue 2017-06-06
Accumulated patches for ppc targets and the pseries machine type.
The big thing in this batch is a start on a substantial cleanup of the
pseries hotplug mechanisms, which were pretty confusing. For now
these shouldn't cause substantial behavioural changes, but I am hoping
these lead to clearer code and eventually to fixes for the bugs we
have in hotplug handling, particularly when hotplug and migration are
combined.
The remaining patches are mostly bugfixes.
# gpg: Signature made Tue 06 Jun 2017 03:48:50 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170606:
spapr: Remove some non-useful properties on DRC objects
spapr: Eliminate spapr_drc_get_type_str()
spapr: Move configure-connector state into DRC
spapr: Clean up spapr_dr_connector_by_*()
spapr: Introduce DRC subclasses
spapr/drc: don't migrate DRC of cold-plugged CPUs and LMBs
spapr: Allow boot from vhost-*-scsi backends
ppc/pnv: check the return value of fdt_setprop()
spapr_nvram: Check return value from blk_getlength()
target/ppc: Fixup set_spr error in h_register_process_table
target-ppc: Fix openpic timer read register offset
spapr: Make DRC get_index and get_type methods into plain functions
spapr: Abolish DRC set_configured method
spapr: Abolish DRC get_fdt method
spapr: Move DRC RTAS calls into spapr_drc.c
migration: Mark CPU states dirty before incoming migration/loadvm
migration: remove register_savevm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZNam5AAoJECgHk2+YTcWmiNAP/1yGqibhujtVTviYpbHbVOBx
wsHkeNOqb1WUXw0bfGw8RfGTlcuoBaeL7r88iwFL8G303g2OPiS1H/tcRuT7gfG0
YV3xdpGYMDFBu1JMV2VSnCqWXfa92EbPJ0vRLjxTD/heLmekVA7TUdiZVBf+S7hK
fQLWqzZboV7RFDm6OUBQOxjCU8/WJ7ggShQJhItzBJTIZJA2C2iiO07v+U04Cwku
Z0eoiwXTMnjDhvKLh8AE5jO3KLCrxGT6u9u9szXMwUtQUDX14X2U5PFCAB89mhUZ
bYW3rRvpsU9eDMQVUo92Lej0e+47T0Mb4R7F9vjWsHwTI+VgcO+K0DXlYru0uKOJ
XLoZVtGls3nRuJIDrMsICCkuveulGZs98YlVcjGjzdfJ748P6FpEQmL9v6WiExHi
G8lu0tP2nW4n1DU+1p4EMQcKWueKuN/p7OhCWGGFvNDeGSvm1e8//TITmbtMZ2/E
PizmCW5YQSGPOGg7fq4C3RhLfkQj4gsESe1lHdWsgSOZd9KYmJWg256BNInroky+
zb8XYts7/i2ogKtj8c9YV8jwvbiHjAYVcO4mr9GNFERO1FSdPbNKuVm2IldChLIt
trI4vngvTIygTcURA7s+cOXFRAnznHrHYl+QH9XQJqI2Ay/+3nGYY+/EYFpCc0EW
l2f/b2ZChRU/UlchdleG
=0C6J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-06-05
# gpg: Signature made Mon 05 Jun 2017 19:58:01 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
scripts: Test script to look for -device crashes
qemu.py: Add QEMUMachine.exitcode() method
qemu.py: Don't set _popen=None on error/shutdown
spapr: cleanup spapr_fixup_cpu_numa_dt() usage
numa: move numa_node from CPUState into target specific classes
numa: make hmp 'info numa' fetch numa nodes from qmp_query_cpus() result
numa: make sure that all cpus have has_node_id set if numa is enabled
numa: move default mapping init to machine
numa: consolidate cpu_preplug fixups/checks for pc/arm/spapr
pc: Use "min-[x]level" on compat_props
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MIDA (modified indirect data addressing) is an optional facility, and
we (currently) don't support it. Let's post an operand exception if
the guest tries to set it in the orb and a channel program check
if it is set in a ccw, as specified in the Principles of Operation.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This function was used in generating the device tree. However, now that
we have different QOM types for different DRC types we can easily store
the information we need in the class structure and avoid this specialized
lookup function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the sPAPRMachineState contains a list of sPAPRConfigureConnector
structures which store intermediate state for the ibm,configure-connector
RTAS call.
This was an attempt to separate this state from the core of the DRC state.
However the configure connector process is intimately tied to the DRC
model, so there's really no point trying to have two levels of interface
here.
Moving the configure-connector state into its corresponding DRC allows
removal of a number of helpers for maintaining the anciliary list.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* Change names to something less ludicrously verbose
* Now that we have QOM subclasses for the different DRC types, use a QOM
typename instead of a PAPR type value parameter
The latter allows removal of the get_type_shift() helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently we only have a single QOM type for all DRCs, but lots of
places where we switch behaviour based on the DRC's PAPR defined type.
This is a poor use of our existing type system.
So, instead create QOM subclasses for each PAPR defined DRC type. We
also introduce intermediate subclasses for physical and logical DRCs,
a division which will be useful later on.
Instead of being stored in the DRC object itself, the PAPR type is now
stored in the class structure. There are still many places where we
switch directly on the PAPR type value, but this at least provides the
basis to start to remove those.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These two methods only have one implementation, and the spec they're
implementing means any other implementation is unlikely, verging on
impossible.
So replace them with simple functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
DRConnectorClass has a set_configured method, however:
* There is only one implementation, and only ever likely to be one
* There's exactly one caller, and that's (now) local
* The implementation is very straightforward
So abolish the method entirely, and just open-code what we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The DRConnectorClass includes a get_fdt method. However
* There's only one implementation, and there's only likely to ever be one
* Both callers are local to spapr_drc
* Each caller only uses one half of the actual implementation
So abolish get_fdt() entirely, and just open-code what we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Since the automatic cpuid-level code was introduced in commit
c39c0edf9b ("target-i386: Automatically
set level/xlevel/xlevel2 when needed"), the CPU model tables just define
the default CPUID level code (set using "min-level"). Setting
"[x]level" forces CPUID level to a specific value and disable the
automatic-level logic.
But the PC compat code was not updated and the existing "[x]level"
compat properties broke compatibility for people using features that
triggered the auto-level code. To keep previous behavior, we should set
"min-[x]level" instead of "[x]level" on compat_props.
This was not a problem for most cases, because old machine-types don't
have full-cpuid-auto-level enabled. The only common use case it broke
was the CPUID[7] auto-level code, that was already enabled since the
first CPUID[7] feature was introduced (in QEMU 1.4.0).
This causes the regression reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1454641
Change the PC compat code to use "min-[x]level" instead of "[x]level" on
compat_props, and add new test cases to ensure we don't break this
again.
Reported-by: "Guo, Zhiyi" <zhguo@redhat.com>
Fixes: c39c0edf9b ("target-i386: Automatically set level/xlevel/xlevel2 when needed")
Cc: qemu-stable@nongnu.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>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=5eL6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into staging
# gpg: Signature made Fri 02 Jun 2017 20:12:48 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chrfe-pull-request:
char: move char devices to chardev/
char: make chr_fe_deinit() optionaly delete backend
char: rename functions that are not part of fe
char: move CharBackend handling in char-fe unit
char: generalize qemu_chr_write_all()
be-hci: use backend functions
chardev: serial & parallel declaration to own headers
chardev: move headers to include/chardev
Remove/replace sysemu/char.h inclusion
char-win: close file handle except with console
char-win: rename hcom->file
char-win: rename win_chr_init/poll win_chr_serial_init/poll
char-win: remove WinChardev.len
char-win: simplify win_chr_read()
char: cast ARRAY_SIZE() as signed to silent warning on empty array
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch reworks IOTLB messaging to prepare for vhost-user
device IOTLB support.
IOTLB messages handling is extracted from vhost-kernel backend,
so that only the messages transport remains backend specifics.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some backends might want to know when things went wrong.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Split the file into public and internal interfaces. I have to rename
the external one because we can't have two include files with the same
name in the same directory. Build system gets confused. The only
exported functions are the ones that handle basic types.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2bwAAoJECgfDbjSjVRpNBgIALmNG7VaixhNUlnfX1n1JBnh
+HBP2zNfvi0q5roBuPFmlziKa3IBHb2Fcte4nb6QxmPg+uoaj39AOzfrrvz210kR
h2j5Qk2bCdMeWBpxI+xDDScwi/Im23Y6KN1eZyMekFr2CaSGiqOHZPPdbsyEcHPB
VylM0uHqSTZL5JAAzEuYlH+LLfPu91HoxMsIAdNuQX+qKyM2DZ4eICBQ0zA73USt
OduZltcRMk7UpvQMqY+2iaEXapXQQEUGrP2Mo8ZyqeIl2ItC33GspqBQIKjuZdrr
tpr/T1VWsLdZnURZXyELrFqrErDXvKaP9HROwvyLyYPXZF+pJ3LA7TopS5UmfNQ=
=Z4xG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
pci, virtio, vhost: fixes
A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 May 2017 01:10:24 AM BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
acpi-test: update expected files
pc: ACPI BIOS: use highest NUMA node for hotplug mem hole SRAT entry
vhost-user: pass message as a pointer to process_message_reply()
virtio_net: Bypass backends for MTU feature negotiation
intel_iommu: turn off pt before 2.9
intel_iommu: support passthrough (PT)
intel_iommu: allow dev-iotlb context entry conditionally
intel_iommu: use IOMMU_ACCESS_FLAG()
intel_iommu: provide vtd_ce_get_type()
intel_iommu: renaming context entry helpers
x86-iommu: use DeviceClass properties
memory: remove the last param in memory_region_iommu_replay()
memory: tune last param of iommu_ops.translate()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Assorted accumulated patches. These are nearly all bugfixes at one
level or another - some for longstanding problems, others for some
regressions caused by more recent cleanups.
This includes preliminary patches towards fixing migration for Radix
Page Table guests under POWER9 and also fixing some migration
regressions due to the re-organization of the interrupt controller
code. Not all the pieces are there yet, so those still won't quite
work, but the preliminary changes make sense on their own.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=nlnV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgibson/tags/ppc-for-2.10-20170525' into staging
ppc patch queue 2017-05-25
Assorted accumulated patches. These are nearly all bugfixes at one
level or another - some for longstanding problems, others for some
regressions caused by more recent cleanups.
This includes preliminary patches towards fixing migration for Radix
Page Table guests under POWER9 and also fixing some migration
regressions due to the re-organization of the interrupt controller
code. Not all the pieces are there yet, so those still won't quite
work, but the preliminary changes make sense on their own.
# gpg: Signature made Thu 25 May 2017 04:50:00 AM BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* dgibson/tags/ppc-for-2.10-20170525:
xics: add unrealize handler
hw/ppc/spapr.c: recover pending LMB unplug info in spapr_lmb_release
hw/ppc: migrating the DRC state of hotplugged devices
hw/ppc: removing drc->detach_cb and drc->detach_cb_opaque
hw/ppc/spapr.c: adding pending_dimm_unplugs to sPAPRMachineState
spapr: add pre_plug function for memory
pseries: Restore support for total vcpus not a multiple of threads-per-core for old machine types
pseries: Split CAS PVR negotiation out into a separate function
spapr: fix error reporting in xics_system_init()
spapr_cpu_core: drop reference on ICP object during CPU realization
hw/ppc/spapr_events.c: removing 'exception' from sPAPREventLogEntry
spapr: ensure core_slot isn't NULL in spapr_core_unplug()
xics_kvm: cache already enabled vCPU ids
spapr: Consolidate HPT freeing code into a routine
spapr-cpu-core: release ICP object when realization fails
spapr: sanitize error handling in spapr_ics_create()
ppc/xics: simplify prototype of xics_spapr_init()
target/ppc: reset reservation in do_rfi()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds a new internal "x-mtu-bypass-backend" property
to bypass backends for MTU feature negotiation.
When this property is set, the MTU feature is negotiated as soon
as supported by the guest and a MTU value is set via the host_mtu
parameter. In case the backend advertises the feature (e.g. DPDK's
vhost-user backend), the feature negotiation is propagated down to
the backend.
When this property is not set, the backend has to support the MTU
feature for its negotiation to succeed.
For compatibility purpose, this property is disabled for machine
types v2.9 and older.
Cc: Aaron Conole <aconole@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is for compatibility.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Hardware support for VT-d device passthrough. Although current Linux can
live with iommu=pt even without this, but this is faster than when using
software passthrough.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
The pointer drc->detach_cb is being used as a way of informing
the detach() function inside spapr_drc.c which cb to execute. This
information can also be retrieved simply by checking drc->type and
choosing the right callback based on it. In this context, detach_cb
is redundant information that must be managed.
After the previous spapr_lmb_release change, no detach_cb_opaques
are being used by any of the three callbacks functions. This is
yet another information that is now unused and, on top of that, can't
be migrated either.
This patch makes the following changes:
- removal of detach_cb_opaque. the 'opaque' argument was removed from
the callbacks and from the detach() function of sPAPRConnectorClass. The
attribute detach_cb_opaque of sPAPRConnector was removed.
- removal of detach_cb from the detach() call. The function pointer
detach_cb of sPAPRConnector was removed. detach() now uses a
switch(drc->type) to execute the apropriate callback. To achieve this,
spapr_core_release, spapr_lmb_release and spapr_phb_remove_pci_device_cb
callbacks were made public to be visible inside detach().
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The LMB DRC release callback, spapr_lmb_release(), uses an opaque
parameter, a sPAPRDIMMState struct that stores the current LMBs that
are allocated to a DIMM (nr_lmbs). After each call to this callback,
the nr_lmbs is decremented by one and, when it reaches zero, the callback
proceeds with the qdev calls to hot unplug the LMB.
Using drc->detach_cb_opaque is problematic because it can't be migrated in
the future DRC migration work. This patch makes the following changes to
eliminate the usage of this opaque callback inside spapr_lmb_release:
- sPAPRDIMMState was moved from spapr.c and added to spapr.h. A new
attribute called 'addr' was added to it. This is used as an unique
identifier to associate a sPAPRDIMMState to a PCDIMM element.
- sPAPRMachineState now hosts a new QTAILQ called 'pending_dimm_unplugs'.
This queue of sPAPRDIMMState elements will store the DIMM state of DIMMs
that are currently going under an unplug process.
- spapr_lmb_release() will now retrieve the nr_lmbs value by getting the
correspondent sPAPRDIMMState. A helper function called spapr_dimm_get_address
was created to fetch the address of a PCDIMM device inside spapr_lmb_release.
When nr_lmbs reaches zero and the callback proceeds with the qdev hot unplug
calls, the sPAPRDIMMState struct is removed from spapr->pending_dimm_unplugs.
After these changes, the opaque argument for spapr_lmb_release is now
unused and is passed as NULL inside spapr_del_lmbs. This and the other
opaque arguments can now be safely removed from the code.
As an additional cleanup made by this patch, the spapr_del_lmbs function
was merged with spapr_memory_unplug_request. The former was being called
only by the latter and both were small enough to fit one single function.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
[dwg: Minor stylistic cleanups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currenty we do not have any RTAS event that is reported by the
event-scan interface. The existing events, RTAS_LOG_TYPE_EPOW and
RTAS_LOG_TYPE_HOTPLUG, are being reported by the check-exception
interface and, as such, marked as 'exception=true'.
Commit 79853e18d9, 'spapr_events: event-scan RTAS interface', added
the event_scan interface because the guest kernel requires it to
initialize other required interfaces. It is acting since then as
a stub because no events that would be reported by it were added
since then. However, the existence of the 'exception' boolean adds
an unnecessary load in the future migration of the pending_events,
sPAPREventLogEntry QTAILQ that hosts the pending RTAS events.
To make the code cleaner and ease the future migration changes, this
patch makes the following changes:
- remove the 'exception' boolean that filter these events. There is
nothing to filter since all events are reported by check-exception;
- functions rtas_event_log_queue, rtas_event_log_dequeue and
rtas_event_log_contains don't receive the 'exception' boolean
as parameter;
- event_scan function was simplified. It was calling
'rtas_event_log_dequeue(mask, false)' that was always returning
'NULL' because we have no events that are created with
exception=false, thus in the end it would execute a jump to
'out_no_events' all the time. The function now assumes that
this will always be the case and all the remaining logic were
deleted.
In the future, when or if we add new RTAS events that should
be reported with the event_scan interface, we can refer to
the changes made in this patch to add the event_scan logic
back.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit a45863bda9 ("xics_kvm: Don't enable KVM_CAP_IRQ_XICS if
already enabled"), we were able to re-hotplug a vCPU that had been hot-
unplugged ealier, thanks to a boolean flag in ICPState that we set when
enabling KVM_CAP_IRQ_XICS.
This could work because the lifecycle of all ICPState objects was the
same as the machine. Commit 5bc8d26de2 ("spapr: allocate the ICPState
object from under sPAPRCPUCore") broke this assumption and now we always
pass a freshly allocated ICPState object (ie, with the flag unset) to
icp_kvm_cpu_setup().
This cause re-hotplug to fail with:
Unable to connect CPU8 to kernel XICS: Device or resource busy
Let's fix this by caching all the vCPU ids for which KVM_CAP_IRQ_XICS was
enabled. This also drops the now useless boolean flag from ICPState.
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Consolidate the code that frees HPT into a separate routine
spapr_free_hpt() as the same chunk of code is called from two places.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function only does hypercall and RTAS-call registration, and thus
never returns an error. This patch adapt the prototype to reflect that.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement a basic infrastructure of handling channel I/O instruction
interception for passed through subchannels:
1. Branch the code path of instruction interception handling by
SubChannel type.
2. For a passed-through subchannel, issue the ORB to kernel to do ccw
translation and perform an I/O operation.
3. Assign different condition code based on the I/O result, or
trigger a program check.
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-12-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce a new callback on subchannel to handle ccw-request.
Realize the callback in vfio-ccw device. Besides, resort to
the event notifier handler to handling the ccw-request results.
1. Pread the I/O results via MMIO region.
2. Update the scsw info to guest.
3. Inject an I/O interrupt to notify guest the I/O result.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-11-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We use the IOMMU_TYPE1 of VFIO to realize the subchannels
passthrough, implement a vfio based subchannels passthrough
driver called "vfio-ccw".
Support qemu parameters in the style of:
"-device vfio-ccw,sysfsdev=$mdev_file_path,devno=xx.x.xxxx'
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-8-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In order to support subchannels pass-through, we introduce a s390
subchannel device called "s390-ccw" to hold the real subchannel info.
The s390-ccw devices inherit from the abstract CcwDevice which connect
to the existing virtual-css-bus.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-7-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The S390 virtual css support already has a mechanism to create a
virtual subchannel and provide it to the guest. However, to
pass-through subchannels to a guest, we need to introduce a new
mechanism to create the subchannel according to the real device
information. Thus we reconstruct css_create_virtual_sch to a new
css_create_sch function to handle all these cases and do allocation
and initialization of the subchannel according to the device type
and machine configuration.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-6-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The S390 virtual css support already has a mechanism to build a
virtual subchannel information block (schib) and provide virtual
subchannels to the guest. However, to pass-through subchannels to
a guest, we need to introduce a new mechanism to build its schib
according to the real device information. Thus we realize a new css
sch_build_schib function to extract the path_masks, chpids, chpid
type from sysfs. To reuse the existing code, we refactor
css_add_virtual_chpid to css_add_chpid.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-5-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We want to support real (i.e. not virtual) channel devices
even for guests that do not support MCSS-E (where guests may
see devices from any channel subsystem image at once). As all
virtio-ccw devices are in css 0xfe (and show up in the default
css 0 for guests not activating MCSS-E), we need an option to
squash both the virtio subchannels and e.g. passed-through
subchannels from their real css (0-3, or 0 for hosts not
activating MCSS-E) into the default css. This will be
exploited in a later patch.
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-4-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
All the functions in hw/audio/audio.h are called "soundhw_*()"
and live in hw/audio/audiohw.c. Rename the header file for
consistency.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 20170508205735.23444-4-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To make it consistent with the remaining soundhw.c functions and
avoid confusion with the audio_init() function in audio/audio.c,
rename audio_init() to soundhw_init().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20170508205735.23444-3-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's no reason to keep the soundhw table in arch_init.c. Move
that code to a new hw/audio/soundhw.c file.
While moving the code, trivial coding style issues were fixed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170508205735.23444-2-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZHMOuAAoJECgfDbjSjVRp/5IH/3kOa7yV3KUi4QVbQV7WwBH3
LK+/jwIz4UhOZn+bS4qi+gjN6aFhNoBNDFmYsRTWKKdLMvZvkRBMDcv8DMIKeAyl
kG/ispv8VI+GY/CRKnqzPm0FSulv8WPRryxkdGzK4oHiMv+4FpFR0v/n9NRHjwTA
XNJ4k33IqBldXyZwwAzP5dT019EMvbn4bNrkLzlcF2w8mTWPf43eX/kIkRX0cAys
5IVTQVGEOwpnyV0jxJDP+aoVMrqv8xl88LLuRpTgWUo0UnxXL5/GZQOCCUN6DQ7M
BOLmyyP9mT9k8iUI+fQsDxAtY7cL9torq+p985nQdH0nxmI3GCoufn9aJG0J9yc=
=d34x
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
pci, virtio, vhost: fixes
A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 May 2017 10:42:06 PM BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
exec: abstract address_space_do_translate()
pci: deassert intx when pci device unrealize
virtio: allow broken device to notify guest
Revert "hw/pci: disable pci-bridge's shpc by default"
acpi-defs: clean up open brace usage
ACPI: don't call acpi_pcihp_device_plug_cb on xen
iommu: Don't crash if machine is not PC_MACHINE
pc: add 2.10 machine type
pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot
libvhost-user: fix crash when rings aren't ready
hw/virtio: fix vhost user fails to startup when MQ
hw/arm/virt: generate 64-bit addressable ACPI objects
hw/acpi-defs: replace leading X with x_ in FADT field names
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit dc0ae76770.
Disabling the shpc controller has an undesired side effect.
The PCI bridge remains with no attached devices at boot time,
and the guest operating systems do not allocate any resources
for it, leaving the bridge unusable. Note that the behaviour
is dictated by the pci bridge specification.
Revert the commit and leave the shpc controller even if is not
actually used by any architecture. Slot 0 remains unusable at boot time.
Keep shpc off for QEMU 2.9 machines.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631 to replace no_user. It was
supposed to be a temporary measure.
When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.
Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.
Except for code comments, changes were generated using the
following Coccinelle patch:
@@
expression DC;
@@
(
-DC->cannot_instantiate_with_device_add_yet = false;
+DC->user_creatable = true;
|
-DC->cannot_instantiate_with_device_add_yet = true;
+DC->user_creatable = false;
)
@@
typedef ObjectClass;
expression dc;
identifier class, data;
@@
static void device_class_init(ObjectClass *class, void *data)
{
...
dc->hotpluggable = true;
+dc->user_creatable = true;
...
}
@@
@@
struct DeviceClass {
...
-bool cannot_instantiate_with_device_add_yet;
+bool user_creatable;
...
}
@@
expression DC;
@@
(
-!DC->cannot_instantiate_with_device_add_yet
+DC->user_creatable
|
-DC->cannot_instantiate_with_device_add_yet
+!DC->user_creatable
)
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
-----BEGIN PGP SIGNATURE-----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=48wH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-05-11
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
# gpg: Signature made Thu 11 May 2017 08:16:07 PM BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: Note: This key has expired!
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* ehabkost/tags/x86-and-machine-pull-request: (29 commits)
migration/i386: Remove support for pre-0.12 formats
vmstatification: i386 FPReg
migration/i386: Remove old non-softfloat 64bit FP support
tests: check -numa node,cpu=props_list usecase
numa: add '-numa cpu,...' option for property based node mapping
numa: remove node_cpu bitmaps as they are no longer used
numa: use possible_cpus for not mapped CPUs check
machine: call machine init from wrapper
numa: remove no longer need numa_post_machine_init()
tests: numa: add case for QMP command query-cpus
QMP: include CpuInstanceProperties into query_cpus output output
virt-arm: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
spapr: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
numa: do default mapping based on possible_cpus instead of node_cpu bitmaps
numa: mirror cpu to node mapping in MachineState::possible_cpus
numa: add check that board supports cpu_index to node mapping
virt-arm: add node-id property to CPU
pc: add node-id property to CPU
spapr: add node-id property to sPAPR core
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move to virtio-gpu-3d.c where all the other virgl code lives too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170505104101.30589-2-kraxel@redhat.com
add machine_run_board_init() wrapper that calls machine
init for now but in follow up patches it will be used
to run generic machine code that should run before
machine init.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-15-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Introduce machine_set_cpu_numa_node() helper that stores
node mapping for CPU in MachineState::possible_cpus.
CPU and node it belongs to is specified by 'props' argument.
Patch doesn't remove old way of storing mapping in
numa_info[X].node_cpu as removing it at the same time
makes patch rather big. Instead it just mirrors mapping
in possible_cpus and follow up per target patches will
switch to possible_cpus and numa_info[X].node_cpu will
be removed once there isn't any users left.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1494415802-227633-7-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will allow switching from cpu_index to core based numa
mapping in follow up patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1494415802-227633-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Originally CPU threads were by default assigned in
round-robin fashion. However it was causing issues in
guest since CPU threads from the same socket/core could
be placed on different NUMA nodes.
Commit fb43b73b (pc: fix default VCPU to NUMA node mapping)
fixed it by grouping threads within a socket on the same node
introducing cpu_index_to_socket_id() callback and commit
20bb648d (spapr: Fix default NUMA node allocation for threads)
reused callback to fix similar issues for SPAPR machine
even though socket doesn't make much sense there.
As result QEMU ended up having 3 default distribution rules
used by 3 targets /virt-arm, spapr, pc/.
In effort of moving NUMA mapping for CPUs into possible_cpus,
generalize default mapping in numa.c by making boards decide
on default mapping and let them explicitly tell generic
numa code to which node a CPU thread belongs to by replacing
cpu_index_to_socket_id() with @cpu_index_to_instance_props()
which provides default node_id assigned by board to specified
cpu_index.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-2-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When there are more nodes than available memory to put the minimum
allowed memory by node, all the memory is put on the last node.
This is because we put (ram_size / nb_numa_nodes) &
~((1 << mc->numa_mem_align_shift) - 1); on each node, and in this
case the value is 0. This is particularly true with pseries,
as the memory must be aligned to 256MB.
To avoid this problem, this patch uses an error diffusion algorithm [1]
to distribute equally the memory on nodes.
We introduce numa_auto_assign_ram() function in MachineClass
to keep compatibility between machine type versions.
The legacy function is used with pseries-2.9, pc-q35-2.9 and
pc-i440fx-2.9 (and previous), the new one with all others.
Example:
qemu-system-ppc64 -S -nographic -nodefaults -monitor stdio -m 1G -smp 8 \
-numa node -numa node -numa node \
-numa node -numa node -numa node
Before:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 0 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 0 MB
node 4 cpus: 4
node 4 size: 0 MB
node 5 cpus: 5
node 5 size: 1024 MB
After:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 256 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 256 MB
node 4 cpus: 4
node 4 size: 256 MB
node 5 cpus: 5
node 5 size: 256 MB
[1] https://en.wikipedia.org/wiki/Error_diffusion
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170502162955.1610-2-lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: s/ram_size/size/ at numa_default_auto_assign_ram()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch is going to add SLIT table support in QEMU, and provides
additional option `dist` for command `-numa` to allow user set vNUMA
distance by QEMU command.
With this patch, when a user wants to create a guest that contains
several vNUMA nodes and also wants to set distance among those nodes,
the QEMU command would like:
```
-numa node,nodeid=0,cpus=0 \
-numa node,nodeid=1,cpus=1 \
-numa node,nodeid=2,cpus=2 \
-numa node,nodeid=3,cpus=3 \
-numa dist,src=0,dst=1,val=21 \
-numa dist,src=0,dst=2,val=31 \
-numa dist,src=0,dst=3,val=41 \
-numa dist,src=1,dst=2,val=21 \
-numa dist,src=1,dst=3,val=31 \
-numa dist,src=2,dst=3,val=21 \
```
Signed-off-by: He Chen <he.chen@linux.intel.com>
Message-Id: <1493260558-20728-1-git-send-email-he.chen@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This makes some changes to fix build failures on the 'min-glib' docker
image, and maybe other platforms with a buildchain that's less tolerant
about duplicated typedefs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PowerPCCPU typedef is included twice if a file includes
both hw/ppc/xics.h and target/ppc/cpu-qom.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Kernel commit 17d48610ae0f ("KVM: PPC: Book 3S: XICS: Implement ICS
P/Q states") added new bits to the state used by KVM IRQs. Currently,
QEMU does not preserve these bits, so migrating (or otherwise saving
and restoring) the guest state causes the P and Q bits to be cleared.
Clearing the P bit has no effect, because the kernel will set it based
on other data, but the loss of a set Q bit will cause a lost
interrupt.
This patch preserves the P and Q bits, correcting the problem.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
patchew has been saying:
ERROR: open brace '{' following struct go on the same line
Fix up acpi-defs.h to follow this rule.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since 2.7 commit (b2a575a Add optionrom compatible with fw_cfg DMA version)
regressed migration during firmware exection time by
abusing fwcfg.dma_enabled property to decide loading
dma version of option rom AND by mistake disabling DMA
for 2.6 and earlier globally instead of only for option rom.
so 2.6 machine type guest is broken when it already runs
firmware in DMA mode but migrated to qemu-2.7(pc-2.6)
at that time;
a) qemu-2.6:pc2.6 (fwcfg.dma=on,firmware=dma,oprom=ioport)
b) qemu-2.7:pc2.6 (fwcfg.dma=off,firmware=ioport,oprom=ioport)
to: a b
from
a OK FAIL
b OK OK
So we currently have broken forward migration from
qemu-2.6 to qemu-2.[789] that however could be fixed
for 2.10 by re-enabling DMA for 2.[56] machine types
and allowing dma capable option rom only since 2.7.
As result qemu should end up with:
c) qemu-2.10:pc2.6 (fwcfg.dma=on,firmware=dma,oprom=ioport)
to: a b c
from
a OK FAIL OK
b OK OK OK
c OK FAIL OK
where forward migration from qemu-2.6 to qemu-2.10 should
work again leaving only qemu-2.[789]:pc-2.6 broken.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our current ACPI table generation code limits the placement of ACPI
tables to 32-bit addressable memory, in order to be able to emit the
root pointer (RSDP) and root table (RSDT) using table types from the
ACPI 1.0 days.
Since ARM was not supported by ACPI before version 5.0, it makes sense
to lift this restriction. This is not crucial for mach-virt, which is
guaranteed to have some memory available below the 4 GB mark, but it
is a nice to have for QEMU machines that do not have any 32-bit
addressable memory, which is not uncommon for real world 64-bit ARM
systems.
Since we already emit a version of the RSDP root pointer that has a
secondary 64-bit wide address field for the 64-bit root table (XSDT),
all we need to do is replace the RSDT generation with the generation
of an XSDT table, and use a different slot in the FADT table to refer
to the DSDT.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
At the request of Michael, replace the leading capital X in the FADT
field name Xfacs and Xdsdt with lower case x + underscore.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No one outside of pcie_aer.h was using error injection; mark them
static for internal use.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-3-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
but it'll come in the next pull request.
* use GDB XML register description for x86
* use _Static_assert in QEMU_BUILD_BUG_ON
* add "R:" to MAINTAINERS and get_maintainers
* checkpatch improvements
* dump threading fixes
* first part of vhost-user-scsi support
* QemuMutex tracing
* vmw_pvscsi and megasas fixes
* sgabios module update
* use Rev3 (ACPI 2.0) FADT
* deprecate -hdachs
* improve -accel documentation
* hax fix
* qemu-char GSource bugfix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZDE+gAAoJEL/70l94x66DIpYH/1IOz3u8ObD8D4Lor07LkCCZ
vWFnTBMgGi9gTL5JQDnukRR3cmNp9EVOtAP5Yf+v+/Xqyq/FNGnoVWxCxEby7LtN
zrIXbsKMCaEcGzRNJFcbKV+KZnzkJrz92J0NHy29ruCK1AsslOXAWf4Qb1MV+fQl
6w2Upsh35usvWCNpFm2o8arzMEmNuE2xJDPKUB11GMrZT6TExq4Zqa8Zj1Ihc0sX
XcDr+eeBmb65Vv3jQLntOhSWAy0Xxf/fDXYTQx+JLHFgvpSOIWMiS+fqIVXtT0bH
0E4hQrBr0qjes8n8+9WGGQW2k8Ak0QlDvrZnQ97hTeV1k6SxW+2ATO2mLeJp9TM=
=5hf2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'bonzini/tags/for-upstream' into staging
A large set of small patches. I have not included yet vhost-user-scsi,
but it'll come in the next pull request.
* use GDB XML register description for x86
* use _Static_assert in QEMU_BUILD_BUG_ON
* add "R:" to MAINTAINERS and get_maintainers
* checkpatch improvements
* dump threading fixes
* first part of vhost-user-scsi support
* QemuMutex tracing
* vmw_pvscsi and megasas fixes
* sgabios module update
* use Rev3 (ACPI 2.0) FADT
* deprecate -hdachs
* improve -accel documentation
* hax fix
* qemu-char GSource bugfix
# gpg: Signature made Fri 05 May 2017 06:10:40 AM EDT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* bonzini/tags/for-upstream: (21 commits)
vhost-scsi: create a vhost-scsi-common abstraction
libvhost-user: replace vasprintf() to fix build
get_maintainer: add subsystem to reviewer output
get_maintainer: --r (list reviewer) is on by default
get_maintainer: it's '--pattern-depth', not '-pattern-depth'
get_maintainer: Teach get_maintainer.pl about the new "R:" tag
MAINTAINERS: Add "R:" tag for self-appointed reviewers
Fix the -accel parameter and the documentation for 'hax'
dump: Acquire BQL around vm_start() in dump thread
hax: Fix memory mapping de-duplication logic
checkpatch: Disallow glib asserts in main code
trace: add qemu mutex lock and unlock trace events
vmw_pvscsi: check message ring page count at initialisation
sgabios: update for "fix wrong video attrs for int 10h,ah==13h"
scsi: avoid an off-by-one error in megasas_mmio_write
vl: deprecate the "-hdachs" option
use _Static_assert in QEMU_BUILD_BUG_ON
target/i386: Add GDB XML register description support
char: Fix removing wrong GSource that be found by fd_in_tag
hw/i386: Build-time assertion on pc/q35 reset register being identical.
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
devices via tn3270. Actual handling of the data stream is
delegated to x3270; more info at http://wiki.qemu.org/Features/3270
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kMb4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'cohuck/tags/s390x-3270-20170504' into staging
Basic support for using channel-attached 3270 'green-screen'
devices via tn3270. Actual handling of the data stream is
delegated to x3270; more info at http://wiki.qemu.org/Features/3270
# gpg: Signature made Thu 04 May 2017 11:36:51 AM BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* cohuck/tags/s390x-3270-20170504:
s390x/3270: Mark non-migratable and enable the device
s390x/3270: Detect for continued presence of a 3270 client
s390x/3270: Add the TCP socket events handler for 3270
s390x/3270: 3270 data stream handling
s390x/3270: Add emulated terminal3270 device
s390x/3270: Add abstract emulated ccw-attached 3270 device
s390x/css: Add an algorithm to find a free chpid
chardev: Basic support for TN3270
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to introduce a new vhost-user-scsi host device type, it makes
sense to abstract part of vhost-scsi into a common parent class. This
commit does exactly that.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-3-git-send-email-felipe@nutanix.com>
This introduces the input and output handlers for 3270 device, setting
up the data tunnel among guest kernel, qemu and the 3270 client.
After the client connected and TN3270 handshake done, signal the not-ready
to ready status by an unsolicited device-end interrupt, and then the 3270
data stream could be handled correctly between the channel and socket.
Multiple commands generated by "Reset" key on x3270 are not supported now,
just simply terminate the connection.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This introduces the infrastructure for the emulated 3270
devices, which will be attached to the virtual-css-bus.
Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This introduces a function named css_find_free_chpid() to find a
free channel path. Because virtio-ccw device used zero as its
channel path number, it would be sensible to skip the reserved one
and search upwards.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This adds a clarifying comment and build time assert to the FADT reset register field initialisation: the reset register is the same on both machine types.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1489558827-28971-3-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This updates the FADT generated for x86/64 machine types from Revision 1 to 3. (Based on ACPI standard 2.0 instead of 1.0) The intention is to expose the reset register information to guest operating systems which require it, specifically OS X/macOS. Revision 1 FADTs do not contain the fields relating to the reset register.
The new layout and contents remains backwards-compatible with operating systems which only support ACPI 1.0, as the existing fields are not modified by this change, as the 64-bit and 32-bit variants are allowed to co-exist according to the ACPI 2.0 standard. No regressions became apparent in tests with a range of Windows (XP-10) and Linux versions.
The BIOS tables test suite's FADT checksum test has also been updated to reflect the new FADT layout and content.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1489558827-28971-2-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to specify the LOADPARM value one may now add ",loadparm=xxx"
parameter to the "-machine s390-ccw-virtio" option.
The property setter will normalize and check the value provided much
like the way the HMC does.
The value is stored, but not used at the moment.
Initial patch from Eugene (jno) Dvurechenski.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Here's a respind of my first pull request for qemu-2.10, consisting of
assorted patches which have accumulated while qemu-2.9 stabilized.
Highlights are:
* Rework / cleanup of the XICS interrupt controller
* Substantial improvement to the 'powernv' machine type
- Includes an MMIO XICS version
* POWER9 support improvements
- POWER9 guests with KVM
- Partial support for POWER9 guests with TCG
* IOMMU and VFIO improvements
* Assorted minor changes
There are several IPMI patches here that aren't usually in my area of
maintenance, but there isn't a regular maintainer and these patches
are for the benefit of the powernv machine type.
This pull request supersedes my 2017-04-26 pull request. This new set
fixes a bug in one of the aforementioned IPMI patches which caused
clang sanitizer failures (and may have crashed on some libc / host
versions).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZAEUCAAoJEGw4ysog2bOS8O4P/01ruoUftX9JCkvqJjReMCjX
h52ygdzkoa24ekc95wjNz9uVjzRavx1AVmd3wty3Po9oPiY7Or8CmvnMoCi2g4Vj
cl2YjneAnaDuv7ud0HObOptfjtJxiNZr1la+gC+z3rIk0CdJ/XmH8Aiw5OhwimnC
2NLL8vxkvIPgjHGJQ4r2YxX6qjhiwBL39DE1YpIKJ1aonh7tgXbrytR34owEphFp
BOQLC0Sk0+GzI9LPlHTe54nQLantFkgzdZYIIA6GX8owtX3Nul/bp3YahdgiPLC1
NOSAyf7CO5+AISWsqrojncd4pTWuCSUfqoRdhSSGrpj3DeFtdiFEtmr8W1NTj+MZ
J9MP/UGQXgI0uLgvhqA41zzy/4OapIWdMczYRwVH8Fb0pFVklhuSQIE1R6V/6L7Q
Gajs6SWczCw0zVyflHXryRdaEyx67gL1Nl0NWgUuSJBt0sdOU9Rh89oNPssJcioy
ZIKCXl5W5uh8xHiFnCnMqbk6YOw15FufiQajideL03QEMztw42ZiejpZObK+yMpA
TnxUsH2p/naQbh5wn4Z+0IUQ6KubX+XstNy/p45aKujvkGHq/L5vI2JNUujIa8EL
x5vTY/zfaSh1k2J1HLm7LvwYnZTS8Mc/TKHKWOV1iGrG+4u89SiuyQq20SqXgNmE
L2SHTJjDxdUDmBWBKCRi
=Nnid
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170426' into staging
ppc patch queue 2017-04-26
Here's a respind of my first pull request for qemu-2.10, consisting of
assorted patches which have accumulated while qemu-2.9 stabilized.
Highlights are:
* Rework / cleanup of the XICS interrupt controller
* Substantial improvement to the 'powernv' machine type
- Includes an MMIO XICS version
* POWER9 support improvements
- POWER9 guests with KVM
- Partial support for POWER9 guests with TCG
* IOMMU and VFIO improvements
* Assorted minor changes
There are several IPMI patches here that aren't usually in my area of
maintenance, but there isn't a regular maintainer and these patches
are for the benefit of the powernv machine type.
This pull request supersedes my 2017-04-26 pull request. This new set
fixes a bug in one of the aforementioned IPMI patches which caused
clang sanitizer failures (and may have crashed on some libc / host
versions).
# gpg: Signature made Wed 26 Apr 2017 07:58:10 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170426: (48 commits)
MAINTAINERS: Remove myself from e500
target/ppc: Style fixes
e500,book3s: mfspr 259: Register mapped/aliased SPRG3 user read
target/ppc: Flush TLB on write to PIDR
spapr-cpu-core: Release ICPState object during CPU unrealization
ppc/pnv: generate an OEM SEL event on shutdown
ppc/pnv: add initial IPMI sensors for the BMC simulator
ppc/pnv: populate device tree for IPMI BT devices
ppc/pnv: populate device tree for serial devices
ppc/pnv: populate device tree for RTC devices
ppc/pnv: scan ISA bus to populate device tree
ppc/pnv: enable only one LPC bus
ppc/pnv: Add support for POWER8+ LPC Controller
spapr: remove the 'nr_servers' field from the machine
target/ppc: Fix size of struct PPCElfPrstatus
ipmi: introduce an ipmi_bmc_gen_event() API
ipmi: introduce an ipmi_bmc_sdr_find() API
ipmi: provide support for FRUs
ipmi: use a file to load SDRs
ppc: add IPMI support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OfeB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' into staging
Xen 2017/04/21 + fix
# gpg: Signature made Tue 25 Apr 2017 19:10:37 BST
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
move xen-mapcache.c to hw/i386/xen/
move xen-hvm.c to hw/i386/xen/
move xen-common.c to hw/xen/
add xen-9p-backend to MAINTAINERS under Xen
xen/9pfs: build and register Xen 9pfs backend
xen/9pfs: send responses back to the frontend
xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
xen/9pfs: receive requests from the frontend
xen/9pfs: connect to the frontend
xen/9pfs: introduce Xen 9pfs backend
9p: introduce a type for the 9p header
xen: import ring.h from xen
configure: use pkg-config for obtaining xen version
xen: additionally restrict xenforeignmemory operations
xen: use libxendevice model to restrict operations
xen: use 5 digit xen versions
xen: use libxendevicemodel when available
configure: detect presence of libxendevicemodel
xen: create wrappers for all other uses of xc_hvm_XXX() functions
xen: rename xen_modified_memory() to xen_hvm_modified_memory()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OpenPOWER systems expect to be notified with such an event before a
shutdown or a reboot. An OEM SEL message is sent with specific
identifiers and a user data containing the request : OFF or REBOOT.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Skiboot, the firmware for the PowerNV platform, expects the BMC to
provide some specific IPMI sensors. These sensors are exposed in the
device tree and their values are updated by the firmware at boot time.
Sensors of interest are :
"FW Boot Progress"
"Boot Count"
As such a device is defined on the command line, we can only detect
its presence at reset time.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It adds the Naples chip which supports proper LPC interrupts via the
LPC controller rather than via an external CPLD.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.9
- ported on latest PowerNV patchset
- moved the IRQ handler in pnv_lpc.c
- introduced pnv_lpc_isa_irq_create() to create the ISA IRQs ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xics_system_init() does not need 'nr_servers' anymore as it is only
used to define the 'interrupt-controller' node in the device tree. So
let's just compute the value when calling spapr_dt_xics().
This also gives us an opportunity to simplify the xics_system_init()
routine and introduce a specific spapr_ics_create() helper to create
the sPAPR ICS object.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will be used to fill the message buffer with custom events expected
by some systems. Typically, an Open PowerNV platform guest is notified
with an OEM SEL message before a shutdown or a reboot.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch exposes a new IPMI routine to query a sdr entry from the
sdr table maintained by the IPMI BMC simulator. The API is very
similar to the internal sdr_find_entry() routine and should be used
the same way to query one or all sdrs.
A typical use would be to loop on the sdrs to build nodes of a device
tree.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The OCC is an on-chip microcontroller based on a ppc405 core used
for various power management tasks. It comes with a pile of additional
hardware sitting on the PIB (aka XSCOM bus). At this point we don't
emulate it (nor plan to do so). However there is one facility which
is provided by the surrounding hardware that we do need, which is the
interrupt generation facility. OPAL uses it to send itself interrupts
under some circumstances and there are other uses around the corner.
So this implement just enough to support this.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.9
- changed the XSCOM interface to fit new model
- QOMified the model ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Processor Service Interface (PSI) Controller is one of the engines
of the "Bridge" unit which connects the different interfaces to the
Power Processor.
This adds just enough of the PSI bridge to handle various on-chip and
the one external interrupt. The rest of PSI has to do with the link to
the IBM FSP service processor which we don't plan to emulate (not used
on OpenPower machines).
The ics_get() and ics_resend() handlers of the XICSFabric interface of
the PowerNV machine are now defined to handle the Interrupt Control
Source of PSI. The InterruptStatsProvider interface is also modified
to dump the new ICS.
Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This provides to a PowerNV chip (POWER8) access to the Interrupt
Management area, which contains the registers of the Interrupt Control
Presenters of each thread. These are used to accept, return, forward
interrupts in the system.
This area is modeled with a per-chip container memory region holding
all the ICP registers. Each thread of a chip is then associated with
its ICP registers using a memory subregion indexed by its PIR number
in the overall region.
The device tree is populated accordingly.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some controllers (ICP, PSI) have a base register address which is
calculated using the chip id.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This provides a new ICPState object for the PowerNV machine (POWER8).
Access to the Interrupt Management area is done though a memory
region. It contains the registers of the Interrupt Control Presenters
of each thread which are used to accept, return, forward interrupts in
the system.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will be used by derived classes in PowerNV for customization.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Today, all the ICPs are created before the CPUs, stored in an array
under the sPAPR machine and linked to the CPU when the core threads
are realized. This modeling brings some complexity when a lookup in
the array is required and it can be simplified by allocating the ICPs
when the CPUs are.
This is the purpose of this proposal which introduces a new 'icp_type'
field under the machine and creates the ICP objects of the right type
(KVM or not) before the PowerPCCPU object are.
This change allows more cleanups : the removal of the icps array under
the sPAPR machine and the removal of the xics_get_cpu_index_by_dt_id()
helper.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Today, the ICPState array of the sPAPR machine is indexed with
'cpu_index' of the CPUState. This numbering of CPUs is internal to
QEMU and the guest only knows about what is exposed in the device
tree, that is the 'cpu_dt_id'. This is why sPAPR uses the helper
xics_get_cpu_index_by_dt_id() to do the mapping in a couple of places.
To provide a more generic XICS layer, we need to abstract the IRQ
'server' number and remove any assumption made on its nature. It
should not be used as a 'cpu_index' for lookups like xics_cpu_setup()
and xics_cpu_destroy() do.
To reach that goal, we choose to introduce a generic 'intc' backlink
under PowerPCCPU, and let the machine core init routine do the
ICPState lookup. The resulting object is passed on to xics_cpu_setup()
which does the store under PowerPCCPU. The IRQ 'server' number in XICS
is now generic. sPAPR uses 'cpu_dt_id' and PowerNV will use 'PIR'
number.
This also has the benefit of simplifying the sPAPR hcall routines
which do not need to do any ICPState lookups anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For a little while around 4.9, Linux kernels that saw the radix bit in
ibm,pa-features would attempt to set up the MMU as if they were a
hypervisor, even if they were a guest, which would cause them to
crash.
Work around this by detecting pre-ISA 3.0 guests by their lack of that
bit in option vector 1, and then removing the radix bit from
ibm,pa-features. Note: This now requires regeneration of that node
after CAS negotiation.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Fix style nits]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add the new node, /chosen/ibm,arch-vec-5-platform-support to the
device tree. This allows the guest to determine which modes are
supported by the hypervisor.
Update the option vector processing in h_client_architecture_support()
to handle the new MMU bits. This allows guests to request hash or
radix mode and QEMU to create the guest's HPT at this time if it is
necessary but hasn't yet been done. QEMU will terminate the guest if
it requests an unavailable mode, as required by the architecture.
Extend the ibm,pa-features node with the new ISA 3.0 values
and set the radix bit if KVM supports radix mode. This probably won't
be used directly by guests to determine the availability of radix mode
(that is indicated by the new node added above) but the architecture
requires that it be set when the hardware supports it.
If QEMU is using KVM, and KVM is capable of running in radix mode,
guests can be run in real-mode without allocating a HPT (because KVM
will use a minimal RPT). So in this case, we avoid creating the HPT
at reset time and later (during CAS) create it if it is necessary.
ISA 3.0 guests will now begin to call h_register_process_table(),
which has been added previously.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Strip some unneeded prefix from error messages]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The H_REGISTER_PROCESS_TABLE H_CALL is used by a guest to indicate to the
hypervisor where in memory its process table is and how translation should
be performed using this process table.
Provide the implementation of this H_CALL for a guest.
We first check for invalid flags, then parse the flags to determine the
operation, and then check the other parameters for valid values based on
the operation (register new table/deregister table/maintain registration).
The process table is then stored in the appropriate location and registered
with the hypervisor (if running under KVM), and the LPCR_[UPRT/GTSE] bits
are updated as required.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Correct missing prototype and uninitialized variable]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The use of the new in memory tables introduced in ISAv3.00 for translation,
also referred to as process tables, requires the introduction of 3 new
H-CALLs; H_REGISTER_PROCESS_TABLE, H_CLEAN_SLB, and H_INVALIDATE_PID.
Add shells for each of these and register them as the hypercall handlers.
Currently they all log an unimplemented hypercall and return H_FUNCTION.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Fix style nits]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also use an 'sPAPRRTCState' attribute under the sPAPR machine to hold
the RTC object. Overall, these changes remove an unnecessary and
implicit dependency on SysBus.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Version: GnuPG v1
iQEcBAABAgAGBQJY/zFbAAoJEO8Ells5jWIR7LgH/A6lWkODVSKihnibRH82J9oe
rTsDdLgAGAMAur++tmNorPadZyMe/2+Cu0VsiIv591ldILruN6+jJydBzFtWFYE5
JQKa2VSTDu6bHPhr/UpRnWLhGzaJogklJR6YLkonDJznb1UnnTwEZ8c8+XD4gWLo
byo/dYF1yMnpVxSak/FkmCmwxc2K7s7P+r4FWO2CgAgY28F+/qERWJMbl1iUevQP
E1PC/XXEvhMdxi+6oYmWACdbW9/KwC5KKVELsQWYU1DcpQ7rWXCtA/mtKxvX+ePw
7CUK9ldeFXHE8uWVDnh3cWUL65Q8OtZarjMbrnN7xzcQDhMysStvVNS4QckN6/I=
=PEvc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 25 Apr 2017 12:22:03 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
COLO-compare: Optimize tcp compare trace event
COLO-compare: Optimize tcp compare for option field
slirp: add a fake NC-SI backend
aspeed: add a FTGMAC100 nic
net/ftgmac100: add a 'aspeed' property
net: add FTGMAC100 support
hw/net: add MII definitions
colo-compare: Fix old packet check bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a second NIC but we do not use it for the moment. We use the
'aspeed' property to tune the definition of the end of ring buffer bit
for the Aspeed SoCs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The Aspeed SoCs have a different definition of the end of the ring
buffer bit. Add a property to specify which set of bits should be used
by the NIC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ItSk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2017-04-24' into staging
Error reporting patches for 2017-04-24
# gpg: Signature made Mon 24 Apr 2017 08:16:34 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2017-04-24:
error: Apply error_propagate_null.cocci again
qga: Make errp the last parameter of qga_vss_fsfreeze
migration: Make errp the last parameter of local functions
scsi: Make errp the last parameter of virtio_scsi_common_realize
fdc: Make errp the last parameter of fdctrl_connect_drives
nfs: Make errp the last parameter of nfs_client_open
block: Make errp the last parameter of commit_active_start
mirror: Make errp the last parameter of mirror_start_job
crypto: Make errp the last parameter of functions
block: Make errp the last parameter of bdrv_img_create
socket: Make errp the last parameter of vsock_connect_saddr
socket: Make errp the last parameter of unix_connect_saddr
socket: Make errp the last parameter of inet_connect_saddr
socket: Make errp the last parameter of socket_connect
util/error: Fix leak in error_vprepend()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only the display controller part is created automatically on PCI
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 647d292c6f5abba8b2a614687229949b5dcb864e.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adding vmstate saving is not in this patch because the state structure
will be changed in further patches, then another patch will add
vmstate descriptor after those changes.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: a32b7fc981a20205f96d530d8e958f12ace1104c.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FTGMAC100 device is an Ethernet controller with DMA function that
can be found on Aspeed SoCs (which include NCSI).
It is fully compliant with IEEE 802.3 specification for 10/100 Mbps
Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and
includes Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) interfaces. It adopts an
AHB bus interface and integrates a link list DMA engine with direct
M-Bus accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000 Mbps mode
only supports full duplex), flow control for full duplex and
backpressure for half duplex.
The FTGMAC100 also implements IP, TCP, UDP checksum offloads and
supports IEEE 802.1Q VLAN tag insertion and removal. It offers
high-priority transmit queue for QoS and CoS applications
This model is backed with a RealTek 8211E PHY which is the chip found
on the AST2500 EVB. It is complete enough to satisfy two different
Linux drivers and a U-Boot driver. Not supported features are :
- IEEE 802.1Q VLAN
- High Priority Transmit Queue
- Wake-On-LAN functions
The code is based on the Coldfire Fast Ethernet Controller model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This adds comments on the Basic mode control and status registers bit
definitions. It also adds a couple of bits for 1000BASE-T and the
RealTek 8211E PHY for the FTGMAC100 model to use.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do not use the ring.h header installed on the system. Instead, import
the header into the QEMU codebase. This avoids problems when QEMU is
built against a Xen version too old to provide all the ring macros.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: anthony.perard@citrix.com
CC: jgross@suse.com
Commit f0f272baf3a7 "xen: use libxendevice model to restrict operations"
added a command-line option (-xen-domid-restrict) to limit operations
using the libxendevicemodel API to a specified domid. The commit also
noted that the restriction would be extended to cover operations issued
via other xen libraries by subsequent patches.
My recent Xen patch [1] added a call to the xenforeignmemory API to allow
it to be restricted. This patch now makes use of that new call when the
-xen-domid-restrict option is passed.
[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=5823d6eb
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds a command-line option (-xen-domid-restrict) which will
use the new libxendevicemodel API to restrict devicemodel [1] operations
to the specified domid. (Such operations are not applicable to the xenpv
machine type).
This patch also adds a tracepoint to allow successful enabling of the
restriction to be monitored.
[1] I.e. operations issued by libxendevicemodel. Operation issued by other
xen libraries (e.g. libxenforeignmemory) are currently still unrestricted
but this will be rectified by subsequent patches.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Today qemu is using e.g. the value 480 for Xen version 4.8.0. As some
Xen version tests are using ">" relations this scheme will lead to
problems when Xen version 4.10.0 is being reached.
Instead of the 3 digit schem use a 5 digit scheme (e.g. 40800 for
version 4.8.0).
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch modifies the wrapper functions in xen_common.h to use the
new xendevicemodel interface if it is available along with compatibility
code to use the old libxenctrl interface if it is not.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170421' into staging
migration/next for 20170421
# gpg: Signature made Fri 21 Apr 2017 11:28:13 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170421: (65 commits)
hmp: info migrate_parameters format tunes
hmp: info migrate_capability format tunes
migration: rename max_size to threshold_size
migration: set current_active_state once
virtio-rng: stop virtqueue while the CPU is stopped
migration: don't close a file descriptor while it can be in use
ram: Remove migration_bitmap_extend()
migration: Disable hotplug/unplug during migration
qdev: Move qdev_unplug() to qdev-monitor.c
qdev: Export qdev_hot_removed
qdev: qdev_hotplug is really a bool
migration: Remove MigrationState parameter from migration_is_idle()
ram: Use RAMBitmap type for coherence
ram: rename last_ram_offset() last_ram_pages()
ram: Use ramblock and page offset instead of absolute offset
ram: Change offset field in PageSearchStatus to page
ram: Remember last_page instead of last_offset
ram: Use page number instead of an address for the bitmap operations
ram: reorganize last_sent_block
ram: ram_discard_range() don't use the mis parameter
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- the new compat machine
- several cleanups and optimizations
- introspection for css ids
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QDBR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170421' into staging
The first batch of s390x changes for 2.10:
- the new compat machine
- several cleanups and optimizations
- introspection for css ids
# gpg: Signature made Fri 21 Apr 2017 08:36:25 BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170421:
s390x: Drop useless casts
s390x: register I/O adapters per ISC during init
s390x/flic: cache flic in s390_get_flic
s390x: initialize flic before I/O subsystems
s390x: use enum for adapter type and standardize its naming
s390x/css: consolidate the devno property for ccw devices
s390x/css: provide introspection for virtual subchannel and device busid
s390x/css: introduce read-only property type for device ids
s390x/pci: make printf always compile in debug output
s390x/kvm: make printf always compile in debug output
s390x: introduce 2.10 compat machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we modify the virtio-rng virqueue while the
vmstate is already migrated we can have some
inconsistencies between the virtqueue state and
the memory content.
To avoid this, stop the virtqueue while the CPU
is stopped.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I need to move qdev_unplug to qdev-monitor in the following patch, and
it needs access to this variable.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The I/O adapters should exist as soon as the bus/infrastructure
exists, and not only when the guest is actually trying to do something
with them. While the lazy allocation was not wrong, allocating at init
time is cleaner, both for the architecture and the code. Let's adjust
this by having each device type (currently for PCI and virtio-ccw)
register the adapters for each ISC (as now we don't know which ISC the
guest will use) as soon as it initializes.
Use a two-dimensional array io_adapters[type][isc] to store adapters
in ChannelSubSys, so that we can conveniently get the adapter id by
the helper function css_get_adapter_id(type, isc).
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's use an enum for io adapter type, and standardize its naming to
CSS_IO_ADAPTER_* by changing S390_PCIPT_ADAPTER to CSS_IO_ADAPTER_PCI.
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's introduce a read-only property type that handles device ids of the
CssDevId type used for channel devices for future use. e.g. exposing the
busid of an I/O subchannel that is assigned to a ccw device.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As all users have been removed, we can remove
cannot_destroy_with_object_finalize_yet field
from the DeviceClass structure.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170414083717.13641-5-lvivier@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The 'value' argument is not modified so this can be made const for code
safeness.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-Id: <20170310200550.13313-2-krzk@kernel.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch is based on Aviv Ben-David (<bd.aviv@gmail.com>)'s patch
upstream:
"IOMMU: enable intel_iommu map and unmap notifiers"
https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg01453.html
However I removed/fixed some content, and added my own codes.
Instead of translate() every page for iotlb invalidations (which is
slower), we walk the pages when needed and notify in a hook function.
This patch enables vfio devices for VT-d emulation.
And, since we already have vhost DMAR support via device-iotlb, a
natural benefit that this patch brings is that vt-d enabled vhost can
live even without ATS capability now. Though more tests are needed.
Signed-off-by: Aviv Ben-David <bdaviv@cs.technion.ac.il>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-10-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This is preparation work to finally enabled dynamic switching ON/OFF for
VT-d protection. The old VT-d codes is using static IOMMU address space,
and that won't satisfy vfio-pci device listeners.
Let me explain.
vfio-pci devices depend on the memory region listener and IOMMU replay
mechanism to make sure the device mapping is coherent with the guest
even if there are domain switches. And there are two kinds of domain
switches:
(1) switch from domain A -> B
(2) switch from domain A -> no domain (e.g., turn DMAR off)
Case (1) is handled by the context entry invalidation handling by the
VT-d replay logic. What the replay function should do here is to replay
the existing page mappings in domain B.
However for case (2), we don't want to replay any domain mappings - we
just need the default GPA->HPA mappings (the address_space_memory
mapping). And this patch helps on case (2) to build up the mapping
automatically by leveraging the vfio-pci memory listeners.
Another important thing that this patch does is to seperate
IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not
depend on the DMAR region (like before this patch). It should be a
standalone region, and it should be able to be activated without
DMAR (which is a common behavior of Linux kernel - by default it enables
IR while disabled DMAR).
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Expose the Cadence GEM revision as a property.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 541324373cf87b50f8be0439a0cb89f5028b016f.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This behavior is not indicated in the datasheet and can confuse the OS.
The TCO can trap NMIs from SERR# or IOCHK# and convert them to SMIs; but
any other TCO event is either delivered as an SMI or completely disabled.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We assumes the iommu_ops were attached to the root region of address
space. This may not be true for all kinds of IOMMU implementation and
especially after commit 3716d5902d ("pci: introduce a bus master
container"). So fix this by not assuming as->root has iommu_ops,
instead depending on the regions reported by memory listener through:
- register a memory listener to dma_as
- during region_add, if it's a region of IOMMU, register a specific
IOMMU notifier, and store all notifiers in a list.
- during region_del, compare and delete the IOMMU notifier from the list
This is also a must for making vhost device IOTLB works for all types
of IOMMUs. Note, since we register one notifier during each
.region_add, the IOTLB may be flushed more than one times, this is
suboptimal and could be optimized in the future.
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fixes: 3716d5902d ("pci: introduce a bus master container")
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If, once the kernel has booted, we try to remove a memory
hotplugged while the kernel was not started, QEMU crashes on
an assert:
qemu-system-ppc64: hw/virtio/vhost.c:651:
vhost_commit: Assertion `r >= 0' failed.
...
#4 in vhost_commit
#5 in memory_region_transaction_commit
#6 in pc_dimm_memory_unplug
#7 in spapr_memory_unplug
#8 spapr_machine_device_unplug
#9 in hotplug_handler_unplug
#10 in spapr_lmb_release
#11 in detach
#12 in set_allocation_state
#13 in rtas_set_indicator
...
If we take a closer look to the guest kernel log, we can see when
we try to unplug the memory:
pseries-hotplug-mem: Attempting to hot-add 4 LMB(s)
What happens:
1- The kernel has ignored the memory hotplug event because
it was not started when it was generated.
2- When we hot-unplug the memory,
QEMU starts to remove the memory,
generates an hot-unplug event,
and signals the kernel of the incoming new event
3- as the kernel is started, on the QEMU signal, it reads
the event list, decodes the hotplug event and tries to
finish the hotplugging.
4- QEMU receive the the hotplug notification while it
is trying to hot-unplug the memory. This moves the memory
DRC to an invalid state
This patch prevents this by not allowing to set the allocation
state to USABLE while the DRC is awaiting release.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1432382
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
long is 32-bits on 64-bit windows, which caused the top half of the
address to be truncated; this patch changes it to use the
QEMU_ALIGN_UP macro which does not suffer the same problem
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This reverts commit 07bfa35477.
The global variable is only read as part of a
apic_reset_irq_delivered();
qemu_irq_raise(s->irq);
if (!apic_get_irq_delivered()) {
sequence, so the value never matters at migration time.
Reported-by: Dr. David Alan Gilbert <dglibert@redhat.com>
Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio_input_send buffers input events until it sees a SYNC. Then it
either sends or drops the entire batch, depending on whether eventq
has enough space available. The case to avoid here is partial sends
where only part of the batch would get to the guest.
Using virtqueue_get_avail_bytes to check the state of eventq was not
correct. The queue may have a smaller number of larger buffers
available so bytes may be enough but the batch would still not be
possible to send, leading to the "Huh? No vq elem available" error.
Instead of checking available bytes, this patch optimistically pops
buffers from the queue and puts them back in case it runs out of
space and the batch needs to be dropped.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1490365490-4854-3-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
They will be used in virtio-scsi-dataplane.c as well, so move them to
header.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170317061447.16243-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just a single bugfix in this batch. It's not strictly in ppc code,
though it's for the pseries machine's benefit. Eduardo suggested it
go through my tree however.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=jFKm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170323' into staging
ppc patch queue for 2017-03-23
Just a single bugfix in this batch. It's not strictly in ppc code,
though it's for the pseries machine's benefit. Eduardo suggested it
go through my tree however.
# gpg: Signature made Thu 23 Mar 2017 10:09:17 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170323:
numa,spapr: align default numa node memory size to 256MB
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch creates inline wrapper functions in xen_common.h for all open
coded calls to xc_hvm_XXX() functions outside of xen_common.h so that use
of xen_xc can be made implicit. This again is in preparation for the move
to using libxendevicemodel.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch is a purely cosmetic change that avoids a name collision in
a subsequent patch.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Doing this will make the transition to using the new libxendevicemodel
interface less intrusive on the callers of these functions, since using
the new library will require a change of handle.
NOTE: The patch also moves the 'externs' for xen_xc and xen_fmem from
xen_backend.h to xen_common.h, and the declarations from
xen_backend.c to xen-common.c, which is where they belong.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
A system with multiple VMGENID devices is undefined in the VMGENID spec by
omission.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ben Warren <ben@skyportsystems.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The WRITE_POINTER linker/loader command that underlies VMGENID depends on
commit baf2d5bfba ("fw-cfg: support writeable blobs", 2017-01-12), which
in turn depends on fw_cfg DMA.
DMA for fw_cfg is enabled in 2.5+ machine types only (see commit
e6915b5f3a, "fw_cfg: unbreak migration compatibility for 2.4 and earlier
machines", 2016-02-18).
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ben Warren <ben@skyportsystems.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com <mailto:ben@skyportsystems.com>>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Since commit 224245b ("spapr: Add LMB DR connectors"), NUMA node
memory size must be aligned to 256MB (SPAPR_MEMORY_BLOCK_SIZE).
But when "-numa" option is provided without "mem" parameter,
the memory is equally divided between nodes, but 8MB aligned.
This can be not valid for pseries.
In that case we can have:
$ ./ppc64-softmmu/qemu-system-ppc64 -m 4G -numa node -numa node -numa node
qemu-system-ppc64: Node 0 memory size 0x55000000 is not aligned to 256 MiB
With this patch, we have:
(qemu) info numa
3 nodes
node 0 cpus: 0
node 0 size: 1280 MB
node 1 cpus:
node 1 size: 1280 MB
node 2 cpus:
node 2 size: 1536 MB
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
More fixes missed in the previous pull request.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYyfidAAoJECgfDbjSjVRp1yYIAKC52EwDVcJxL2CEGncCQTVT
i9x04TYmzLOO+dERsO7Z+jphoB1cxpVxZVrvG5wfZo07gcGheNk524ABM2c9tNqa
7OZFcdBmN/l5C9ynL6aCdgu/bns5sEMUXf3By3l8iWKupc1C8URWGrfMVypFDumZ
AOSD/4bbvXxZlZjOENq5LsRHYU68KBK07C1fDRJA7b7ChXHS6qefeq6fbOvI9zJ7
24MltJMsNS36l//namD2HFPnO1eD3HXc57yBn5QBTTn5FERIghxYSsluAY7irKMp
UurF1D0pUL1sU2fjaLwFRBJL15tz6syjYOkna9cGmOT8m1D7CYnKjCRErxtqAmE=
=4pMp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci: fixes
More fixes missed in the previous pull request.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 16 Mar 2017 02:29:49 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio-serial-bus: Delete timer from list before free it
hw/virtio: fix Power Management Control Register for PCI Express virtio devices
hw/virtio: fix Link Control Register for PCI Express virtio devices
hw/virtio: fix error enabling flags in Device Control register
hw/pcie: fix Extended Configuration Space for devices with no Extended Capabilities
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Quoting cirrus source code:
Follow real hardware, cirrus card emulated has 4 MB video memory.
Also accept 8 MB/16 MB for backward compatibility.
So just use 4MB by default. We decided to leave that at 8MB by default
a while ago, for live migration compatibility reasons. But we have
compat properties to handle that, so that isn't a compeling reason.
This also removes some sanity check inconsistencies in the cirrus code.
Some places check against the allocated video memory, some places check
against the 4MB physical hardware has. Guest code can trigger asserts
because of that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494514-15606-1-git-send-email-kraxel@redhat.com
As the pci ahci can be hotplug and unplug, in the ahci unrealize
function it should free all the resource once allocated in the
realized function. This patch add ide_exit to free the resource.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 1488449293-80280-3-git-send-email-liqiang6-s@360.cn
Signed-off-by: John Snow <jsnow@redhat.com>
Make Power Management State flag writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make several Link Control Register flags writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the virtio devices are PCI Express, make error-enabling flags
writable to respect the PCIe spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Absence of any Extended Capabilities is required to be
indicated by an Extended Capability header with a Capability ID of
0000h, a Capability Version of 0h, and a Next Capability Offset of 000h.
Instead of inserting a 'NULL' capability is simpler to mark the start
of the Extended Configuration Space as read-only to achieve the same
behaviour.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
96a8821d21 ("virtio: unbreak virtio-pci with IOMMU after caching ring
translations") tries to make IOMMU works with virtio memory region
cache, but it requires IOMMU to be created before any virtio
devices. This is sub optimal, fixing this by introduce a bus master
container to make sure address space can be initialized during device
registering, and then we can safely set alias and make
bus_master_enable_region as its subregion during bus master
initialization.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
bb9986452 "spapr_pci: Advertise access to PCIe extended config space"
allowed guests to access the extended config space of PCI Express devices
via the PAPR interfaces, even though the paravirtualized bus mostly acts
like plain PCI.
However, that patch enabled access unconditionally, including for existing
machine types, which is an unwise change in behaviour. This patch limits
the change to pseries-2.9 (and later) machine types.
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
glibc blacklists TSX on Haswell CPUs with model==60 and
stepping < 4. To make the Haswell CPU model more useful, make
those guests actually use TSX by changing CPU stepping to 4.
References:
* glibc commit 2702856bf45c82cf8e69f2064f5aa15c0ceb6359
https://sourceware.org/git/?p=glibc.git;a=commit;h=2702856bf45c82cf8e69f2064f5aa15c0ceb6359
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJYuOEEAAoJEGw4ysog2bOSHD0P/jBg/qr/4KnsB1KhnlVrB2sP
vy2d3bGGlUWr9Z+CK/PMCRB8ekFgQLjidLIXji6mviUocv6m3WsVrnbLF/oOL/IT
NPMVAffw7q804YVu1Ns9R82d6CIqHTy//bpg69tFMcJmhL9fqPan3wTZZ9JeiyAm
SikqkAHBSW4SxKqg8ApaSqx5L2QTqyfkClR0sLmgM0JtmfJrbobpQ6bMtdPjUZ9L
n2gnpO2vaWCa1SEQrRrdELqvcD8PHkSJapWOBXOkpGWxoeov/PYxOgkpdDUW4qYY
lVLtp1Vd3OB/h3Unqfw32DNiHA5p89hWPX5UybKMgRVL9Cv2/lyY47pcY8XTeNzn
bv84YRbFJeI+GgoEnghmtq+IM8XiW/cr9rWm9wATKfKGcmmFauumALrsffUpHVCM
4hSNgBv5t2V9ptZ+MDlM/Ku+zk9GoqwQ+hemdpVtiyhOtGUPGFBn5YLE4c2DHFxV
+L9JtBnFn8obnssNoz0wL+QvZchT1qUHMhH5CWAanjw9CTDp/YwQ2P01zK+00s9d
4cB7fUG3WNto5eXXEGMaXeDsUEz8z//hTe3j5sVbnHsXi0R3dhv7iryifmx4bUKU
H9EwAc+uNUHbvBy7u6IWg0I8P2n00CCO6JqXijQ92zELJ5j0XhzHUI2dOXn+zyEo
3FZu56LFnSSUBEXuTjq4
=PcNw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170303' into staging
ppc patch queuye for 2017-03-03
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
# gpg: Signature made Fri 03 Mar 2017 03:20:36 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170303:
target/ppc: rewrite f[n]m[add,sub] using float64_muladd
spapr: Small cleanup of PPC MMU enums
spapr_pci: Advertise access to PCIe extended config space
target/ppc: Rework hash mmu page fault code and add defines for clarity
target/ppc: Move no-execute and guarded page checking into new function
target/ppc: Add execute permission checking to access authority check
target/ppc: Add Instruction Authority Mask Register Check
hw/ppc/spapr: Add POWER9 to pseries cpu models
target/ppc/POWER9: Add cpu_has_work function for POWER9
target/ppc/POWER9: Add POWER9 pa-features definition
target/ppc/POWER9: Add POWER9 mmu fault handler
target/ppc: Don't gen an SDR1 on POWER9 and rework register creation
target/ppc: Add patb_entry to sPAPRMachineState
target/ppc/POWER9: Add POWERPC_MMU_V3 bit
powernv: Don't test POWER9 CPU yet
exec, kvm, target-ppc: Move getrampagesize() to common code
target/ppc: Add POWER9/ISAv3.00 to compat_table
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These cause compilation failures on CentOS 6 or other operating
systems with older GCCs.
Cc: David Gibson <dgibson@redhat.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1488558530-21016-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Migration from a 2.3.0 qemu results in a reboot on the receiving QEMU
due to a disagreement about SM (System management) interrupts.
2.3.0 didn't have much SMI support, but it did set CPU_INTERRUPT_SMI
and this gets into the migration stream, but on 2.3.0 it
never got delivered.
~2.4.0 SMI interrupt support was added but was broken - so
that when a 2.3.0 stream was received it cleared the CPU_INTERRUPT_SMI
but never actually caused an interrupt.
The SMI delivery was recently fixed by 68c6efe07a, but the
effect now is that an incoming 2.3.0 stream takes the interrupt it
had flagged but it's bios can't actually handle it(I think
partly due to the original interrupt not being taken during boot?).
The consequence is a triple(?) fault and a reboot.
Tested from:
2.3.1 -M 2.3.0
2.7.0 -M 2.3.0
2.8.0 -M 2.3.0
2.8.0 -M 2.8.0
This corresponds to RH bugzilla entry 1420679.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170223133441.16010-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal. Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYt7llAAoJECgfDbjSjVRp+r4H/1cmQ4F67H8oSOAT8xuAQFku
OdHoVRJMWf7CRvZ7JqVke/a877d+h6ZpfW5dZQ7hp7O7rkPiuPHa5PVb0WGwDqrD
scSOIvDPxJm19pnfZoF4zx+Ov45W5ahF+gwwm/sJU232ApLqOmAjs0FUxidkadQE
f5Jrjs20WO2Vkkcd3U7Zl31myre0V7AbwIm7dB/8B+dpL6bJcxSvlM4krwLdBY6S
lLs9V6ypRzjUxS3MDANL75KNrO/zys55J+Pa4sEh4+H0OX71v9Icl3s1zaM8J/EN
VPjdqhDvJuEahc50FbJyRZQGIzOZ6PcGMsKUHKlxoVmDYZ6Pv5lOnpaLZRT6HMk=
=ITdO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc: fixes, features
virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal. Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 02 Mar 2017 06:19:17 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pxb-pcie: fix PCI Express hotplug support
tests/acpi: update DSDT after last patch
acpi: simplify _OSC
virtio: unbreak virtio-pci with IOMMU after caching ring translations
virtio: add missing region cache init in virtio_load()
virtio: invalidate memory in vring_set_avail_event()
virtio: guard vring access when setting notification
virtio: check for vring setup in virtio_queue_empty
MAINTAINERS: Add VM Generation ID entries
tests: Move reusable ACPI code into a utility file
qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
ACPI: Add Virtual Machine Generation ID support
ACPI: Add vmgenid blob storage to the build tables
docs: VM Generation ID device description
linker-loader: Add new 'write pointer' command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ISA v3.00 adds the idea of a partition table which is used to store the
address translation details for all partitions on the system. The partition
table consists of double word entries indexed by partition id where the second
double word contains the location of the process table in guest memory. The
process table is registered by the guest via a h-call.
We need somewhere to store the address of the process table so we add an entry
to the sPAPRMachineState struct called patb_entry to represent the second
doubleword of a single partition table entry corresponding to the current
guest. We need to store this value so we know if the guest is using radix or
hash translation and the location of the corresponding process table in guest
memory. Since we only have a single guest per qemu instance, we only need one
entry.
Since the partition table is technically a hypervisor resource we require that
access to it is abstracted by the virtual hypervisor through the get_patbe()
call. Currently the value of the entry is never set (and thus
defaults to 0 indicating hash), but it will be required to both implement
POWER9 kvm support and tcg radix support.
We also add this field to be migrated as part of the sPAPRMachineState as we
will need it on the receiving side as the guest will never tell us this
information again and we need it to perform translation.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson