2828 lines
		
	
	
		
			85 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			2828 lines
		
	
	
		
			85 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * SCSI Device emulation
 | |
|  *
 | |
|  * Copyright (c) 2006 CodeSourcery.
 | |
|  * Based on code by Fabrice Bellard
 | |
|  *
 | |
|  * Written by Paul Brook
 | |
|  * Modifications:
 | |
|  *  2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
 | |
|  *                                 when the allocation length of CDB is smaller
 | |
|  *                                 than 36.
 | |
|  *  2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
 | |
|  *                                 MODE SENSE response.
 | |
|  *
 | |
|  * This code is licensed under the LGPL.
 | |
|  *
 | |
|  * Note that this file only handles the SCSI architecture model and device
 | |
|  * commands.  Emulation of interface/link layer protocols is handled by
 | |
|  * the host adapter emulator.
 | |
|  */
 | |
| 
 | |
| //#define DEBUG_SCSI
 | |
| 
 | |
| #ifdef DEBUG_SCSI
 | |
| #define DPRINTF(fmt, ...) \
 | |
| do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
 | |
| #else
 | |
| #define DPRINTF(fmt, ...) do {} while(0)
 | |
| #endif
 | |
| 
 | |
| #include "qemu/osdep.h"
 | |
| #include "qemu-common.h"
 | |
| #include "qemu/error-report.h"
 | |
| #include "hw/scsi/scsi.h"
 | |
| #include "block/scsi.h"
 | |
| #include "sysemu/sysemu.h"
 | |
| #include "sysemu/block-backend.h"
 | |
| #include "sysemu/blockdev.h"
 | |
| #include "hw/block/block.h"
 | |
| #include "sysemu/dma.h"
 | |
| 
 | |
| #ifdef __linux
 | |
| #include <scsi/sg.h>
 | |
| #endif
 | |
| 
 | |
| #define SCSI_WRITE_SAME_MAX         524288
 | |
| #define SCSI_DMA_BUF_SIZE           131072
 | |
| #define SCSI_MAX_INQUIRY_LEN        256
 | |
| #define SCSI_MAX_MODE_LEN           256
 | |
| 
 | |
| #define DEFAULT_DISCARD_GRANULARITY 4096
 | |
| #define DEFAULT_MAX_UNMAP_SIZE      (1 << 30)   /* 1 GB */
 | |
| #define DEFAULT_MAX_IO_SIZE         INT_MAX     /* 2 GB - 1 block */
 | |
| 
 | |
| typedef struct SCSIDiskState SCSIDiskState;
 | |
| 
 | |
| typedef struct SCSIDiskReq {
 | |
|     SCSIRequest req;
 | |
|     /* Both sector and sector_count are in terms of qemu 512 byte blocks.  */
 | |
|     uint64_t sector;
 | |
|     uint32_t sector_count;
 | |
|     uint32_t buflen;
 | |
|     bool started;
 | |
|     struct iovec iov;
 | |
|     QEMUIOVector qiov;
 | |
|     BlockAcctCookie acct;
 | |
| } SCSIDiskReq;
 | |
| 
 | |
| #define SCSI_DISK_F_REMOVABLE             0
 | |
| #define SCSI_DISK_F_DPOFUA                1
 | |
| #define SCSI_DISK_F_NO_REMOVABLE_DEVOPS   2
 | |
| 
 | |
| struct SCSIDiskState
 | |
| {
 | |
|     SCSIDevice qdev;
 | |
|     uint32_t features;
 | |
|     bool media_changed;
 | |
|     bool media_event;
 | |
|     bool eject_request;
 | |
|     uint16_t port_index;
 | |
|     uint64_t max_unmap_size;
 | |
|     uint64_t max_io_size;
 | |
|     QEMUBH *bh;
 | |
|     char *version;
 | |
|     char *serial;
 | |
|     char *vendor;
 | |
|     char *product;
 | |
|     bool tray_open;
 | |
|     bool tray_locked;
 | |
| };
 | |
| 
 | |
| static int scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed);
 | |
| 
 | |
| static void scsi_free_request(SCSIRequest *req)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
| 
 | |
|     qemu_vfree(r->iov.iov_base);
 | |
| }
 | |
| 
 | |
| /* Helper function for command completion with sense.  */
 | |
| static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
 | |
| {
 | |
|     DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
 | |
|             r->req.tag, sense.key, sense.asc, sense.ascq);
 | |
|     scsi_req_build_sense(&r->req, sense);
 | |
|     scsi_req_complete(&r->req, CHECK_CONDITION);
 | |
| }
 | |
| 
 | |
| static uint32_t scsi_init_iovec(SCSIDiskReq *r, size_t size)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
| 
 | |
|     if (!r->iov.iov_base) {
 | |
|         r->buflen = size;
 | |
|         r->iov.iov_base = blk_blockalign(s->qdev.conf.blk, r->buflen);
 | |
|     }
 | |
|     r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
 | |
|     qemu_iovec_init_external(&r->qiov, &r->iov, 1);
 | |
|     return r->qiov.size / 512;
 | |
| }
 | |
| 
 | |
| static void scsi_disk_save_request(QEMUFile *f, SCSIRequest *req)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
| 
 | |
|     qemu_put_be64s(f, &r->sector);
 | |
|     qemu_put_be32s(f, &r->sector_count);
 | |
|     qemu_put_be32s(f, &r->buflen);
 | |
|     if (r->buflen) {
 | |
|         if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
 | |
|             qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
 | |
|         } else if (!req->retry) {
 | |
|             uint32_t len = r->iov.iov_len;
 | |
|             qemu_put_be32s(f, &len);
 | |
|             qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
 | |
|         }
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
| 
 | |
|     qemu_get_be64s(f, &r->sector);
 | |
|     qemu_get_be32s(f, &r->sector_count);
 | |
|     qemu_get_be32s(f, &r->buflen);
 | |
|     if (r->buflen) {
 | |
|         scsi_init_iovec(r, r->buflen);
 | |
|         if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
 | |
|             qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
 | |
|         } else if (!r->req.retry) {
 | |
|             uint32_t len;
 | |
|             qemu_get_be32s(f, &len);
 | |
|             r->iov.iov_len = len;
 | |
|             assert(r->iov.iov_len <= r->buflen);
 | |
|             qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     qemu_iovec_init_external(&r->qiov, &r->iov, 1);
 | |
| }
 | |
| 
 | |
| static void scsi_aio_complete(void *opaque, int ret)
 | |
| {
 | |
|     SCSIDiskReq *r = (SCSIDiskReq *)opaque;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
| 
 | |
|     assert(r->req.aiocb != NULL);
 | |
|     r->req.aiocb = NULL;
 | |
|     if (r->req.io_canceled) {
 | |
|         scsi_req_cancel_complete(&r->req);
 | |
|         goto done;
 | |
|     }
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         if (scsi_handle_rw_error(r, -ret, true)) {
 | |
|             goto done;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|     scsi_req_complete(&r->req, GOOD);
 | |
| 
 | |
| done:
 | |
|     scsi_req_unref(&r->req);
 | |
| }
 | |
| 
 | |
| static bool scsi_is_cmd_fua(SCSICommand *cmd)
 | |
| {
 | |
|     switch (cmd->buf[0]) {
 | |
|     case READ_10:
 | |
|     case READ_12:
 | |
|     case READ_16:
 | |
|     case WRITE_10:
 | |
|     case WRITE_12:
 | |
|     case WRITE_16:
 | |
|         return (cmd->buf[1] & 8) != 0;
 | |
| 
 | |
|     case VERIFY_10:
 | |
|     case VERIFY_12:
 | |
|     case VERIFY_16:
 | |
|     case WRITE_VERIFY_10:
 | |
|     case WRITE_VERIFY_12:
 | |
|     case WRITE_VERIFY_16:
 | |
|         return true;
 | |
| 
 | |
|     case READ_6:
 | |
|     case WRITE_6:
 | |
|     default:
 | |
|         return false;
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void scsi_write_do_fua(SCSIDiskReq *r)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
| 
 | |
|     assert(r->req.aiocb == NULL);
 | |
| 
 | |
|     if (r->req.io_canceled) {
 | |
|         scsi_req_cancel_complete(&r->req);
 | |
|         goto done;
 | |
|     }
 | |
| 
 | |
|     if (scsi_is_cmd_fua(&r->req.cmd)) {
 | |
|         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0,
 | |
|                          BLOCK_ACCT_FLUSH);
 | |
|         r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     scsi_req_complete(&r->req, GOOD);
 | |
| 
 | |
| done:
 | |
|     scsi_req_unref(&r->req);
 | |
| }
 | |
| 
 | |
| static void scsi_dma_complete_noio(SCSIDiskReq *r, int ret)
 | |
| {
 | |
|     assert(r->req.aiocb == NULL);
 | |
| 
 | |
|     if (r->req.io_canceled) {
 | |
|         scsi_req_cancel_complete(&r->req);
 | |
|         goto done;
 | |
|     }
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         if (scsi_handle_rw_error(r, -ret, false)) {
 | |
|             goto done;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     r->sector += r->sector_count;
 | |
|     r->sector_count = 0;
 | |
|     if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
 | |
|         scsi_write_do_fua(r);
 | |
|         return;
 | |
|     } else {
 | |
|         scsi_req_complete(&r->req, GOOD);
 | |
|     }
 | |
| 
 | |
| done:
 | |
|     scsi_req_unref(&r->req);
 | |
| }
 | |
| 
 | |
| static void scsi_dma_complete(void *opaque, int ret)
 | |
| {
 | |
|     SCSIDiskReq *r = (SCSIDiskReq *)opaque;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
| 
 | |
|     assert(r->req.aiocb != NULL);
 | |
|     r->req.aiocb = NULL;
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|     } else {
 | |
|         block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|     }
 | |
|     scsi_dma_complete_noio(r, ret);
 | |
| }
 | |
| 
 | |
| static void scsi_read_complete(void * opaque, int ret)
 | |
| {
 | |
|     SCSIDiskReq *r = (SCSIDiskReq *)opaque;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     int n;
 | |
| 
 | |
|     assert(r->req.aiocb != NULL);
 | |
|     r->req.aiocb = NULL;
 | |
|     if (r->req.io_canceled) {
 | |
|         scsi_req_cancel_complete(&r->req);
 | |
|         goto done;
 | |
|     }
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         if (scsi_handle_rw_error(r, -ret, true)) {
 | |
|             goto done;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|     DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->qiov.size);
 | |
| 
 | |
|     n = r->qiov.size / 512;
 | |
|     r->sector += n;
 | |
|     r->sector_count -= n;
 | |
|     scsi_req_data(&r->req, r->qiov.size);
 | |
| 
 | |
| done:
 | |
|     scsi_req_unref(&r->req);
 | |
| }
 | |
| 
 | |
| /* Actually issue a read to the block device.  */
 | |
| static void scsi_do_read(SCSIDiskReq *r, int ret)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     uint32_t n;
 | |
| 
 | |
|     assert (r->req.aiocb == NULL);
 | |
| 
 | |
|     if (r->req.io_canceled) {
 | |
|         scsi_req_cancel_complete(&r->req);
 | |
|         goto done;
 | |
|     }
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         if (scsi_handle_rw_error(r, -ret, false)) {
 | |
|             goto done;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     /* The request is used as the AIO opaque value, so add a ref.  */
 | |
|     scsi_req_ref(&r->req);
 | |
| 
 | |
|     if (r->req.sg) {
 | |
|         dma_acct_start(s->qdev.conf.blk, &r->acct, r->req.sg, BLOCK_ACCT_READ);
 | |
|         r->req.resid -= r->req.sg->size;
 | |
|         r->req.aiocb = dma_blk_read(s->qdev.conf.blk, r->req.sg, r->sector,
 | |
|                                     scsi_dma_complete, r);
 | |
|     } else {
 | |
|         n = scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
 | |
|         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct,
 | |
|                          n * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ);
 | |
|         r->req.aiocb = blk_aio_readv(s->qdev.conf.blk, r->sector, &r->qiov, n,
 | |
|                                      scsi_read_complete, r);
 | |
|     }
 | |
| 
 | |
| done:
 | |
|     scsi_req_unref(&r->req);
 | |
| }
 | |
| 
 | |
| static void scsi_do_read_cb(void *opaque, int ret)
 | |
| {
 | |
|     SCSIDiskReq *r = (SCSIDiskReq *)opaque;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
| 
 | |
|     assert (r->req.aiocb != NULL);
 | |
|     r->req.aiocb = NULL;
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|     } else {
 | |
|         block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|     }
 | |
|     scsi_do_read(opaque, ret);
 | |
| }
 | |
| 
 | |
| /* Read more data from scsi device into buffer.  */
 | |
| static void scsi_read_data(SCSIRequest *req)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     bool first;
 | |
| 
 | |
|     DPRINTF("Read sector_count=%d\n", r->sector_count);
 | |
|     if (r->sector_count == 0) {
 | |
|         /* This also clears the sense buffer for REQUEST SENSE.  */
 | |
|         scsi_req_complete(&r->req, GOOD);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     /* No data transfer may already be in progress */
 | |
|     assert(r->req.aiocb == NULL);
 | |
| 
 | |
|     /* The request is used as the AIO opaque value, so add a ref.  */
 | |
|     scsi_req_ref(&r->req);
 | |
|     if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
 | |
|         DPRINTF("Data transfer direction invalid\n");
 | |
|         scsi_read_complete(r, -EINVAL);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     if (s->tray_open) {
 | |
|         scsi_read_complete(r, -ENOMEDIUM);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     first = !r->started;
 | |
|     r->started = true;
 | |
|     if (first && scsi_is_cmd_fua(&r->req.cmd)) {
 | |
|         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0,
 | |
|                          BLOCK_ACCT_FLUSH);
 | |
|         r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_do_read_cb, r);
 | |
|     } else {
 | |
|         scsi_do_read(r, 0);
 | |
|     }
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * scsi_handle_rw_error has two return values.  0 means that the error
 | |
|  * must be ignored, 1 means that the error has been processed and the
 | |
|  * caller should not do anything else for this request.  Note that
 | |
|  * scsi_handle_rw_error always manages its reference counts, independent
 | |
|  * of the return value.
 | |
|  */
 | |
| static int scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed)
 | |
| {
 | |
|     bool is_read = (r->req.cmd.mode == SCSI_XFER_FROM_DEV);
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     BlockErrorAction action = blk_get_error_action(s->qdev.conf.blk,
 | |
|                                                    is_read, error);
 | |
| 
 | |
|     if (action == BLOCK_ERROR_ACTION_REPORT) {
 | |
|         if (acct_failed) {
 | |
|             block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|         }
 | |
|         switch (error) {
 | |
|         case ENOMEDIUM:
 | |
|             scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
 | |
|             break;
 | |
|         case ENOMEM:
 | |
|             scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
 | |
|             break;
 | |
|         case EINVAL:
 | |
|             scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
|             break;
 | |
|         case ENOSPC:
 | |
|             scsi_check_condition(r, SENSE_CODE(SPACE_ALLOC_FAILED));
 | |
|             break;
 | |
|         default:
 | |
|             scsi_check_condition(r, SENSE_CODE(IO_ERROR));
 | |
|             break;
 | |
|         }
 | |
|     }
 | |
|     blk_error_action(s->qdev.conf.blk, action, is_read, error);
 | |
|     if (action == BLOCK_ERROR_ACTION_STOP) {
 | |
|         scsi_req_retry(&r->req);
 | |
|     }
 | |
|     return action != BLOCK_ERROR_ACTION_IGNORE;
 | |
| }
 | |
| 
 | |
| static void scsi_write_complete_noio(SCSIDiskReq *r, int ret)
 | |
| {
 | |
|     uint32_t n;
 | |
| 
 | |
|     assert (r->req.aiocb == NULL);
 | |
| 
 | |
|     if (r->req.io_canceled) {
 | |
|         scsi_req_cancel_complete(&r->req);
 | |
|         goto done;
 | |
|     }
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         if (scsi_handle_rw_error(r, -ret, false)) {
 | |
|             goto done;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     n = r->qiov.size / 512;
 | |
|     r->sector += n;
 | |
|     r->sector_count -= n;
 | |
|     if (r->sector_count == 0) {
 | |
|         scsi_write_do_fua(r);
 | |
|         return;
 | |
|     } else {
 | |
|         scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
 | |
|         DPRINTF("Write complete tag=0x%x more=%zd\n", r->req.tag, r->qiov.size);
 | |
|         scsi_req_data(&r->req, r->qiov.size);
 | |
|     }
 | |
| 
 | |
| done:
 | |
|     scsi_req_unref(&r->req);
 | |
| }
 | |
| 
 | |
| static void scsi_write_complete(void * opaque, int ret)
 | |
| {
 | |
|     SCSIDiskReq *r = (SCSIDiskReq *)opaque;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
| 
 | |
|     assert (r->req.aiocb != NULL);
 | |
|     r->req.aiocb = NULL;
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|     } else {
 | |
|         block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
|     }
 | |
|     scsi_write_complete_noio(r, ret);
 | |
| }
 | |
| 
 | |
| static void scsi_write_data(SCSIRequest *req)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     uint32_t n;
 | |
| 
 | |
|     /* No data transfer may already be in progress */
 | |
|     assert(r->req.aiocb == NULL);
 | |
| 
 | |
|     /* The request is used as the AIO opaque value, so add a ref.  */
 | |
|     scsi_req_ref(&r->req);
 | |
|     if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
 | |
|         DPRINTF("Data transfer direction invalid\n");
 | |
|         scsi_write_complete_noio(r, -EINVAL);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     if (!r->req.sg && !r->qiov.size) {
 | |
|         /* Called for the first time.  Ask the driver to send us more data.  */
 | |
|         r->started = true;
 | |
|         scsi_write_complete_noio(r, 0);
 | |
|         return;
 | |
|     }
 | |
|     if (s->tray_open) {
 | |
|         scsi_write_complete_noio(r, -ENOMEDIUM);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     if (r->req.cmd.buf[0] == VERIFY_10 || r->req.cmd.buf[0] == VERIFY_12 ||
 | |
|         r->req.cmd.buf[0] == VERIFY_16) {
 | |
|         if (r->req.sg) {
 | |
|             scsi_dma_complete_noio(r, 0);
 | |
|         } else {
 | |
|             scsi_write_complete_noio(r, 0);
 | |
|         }
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     if (r->req.sg) {
 | |
|         dma_acct_start(s->qdev.conf.blk, &r->acct, r->req.sg, BLOCK_ACCT_WRITE);
 | |
|         r->req.resid -= r->req.sg->size;
 | |
|         r->req.aiocb = dma_blk_write(s->qdev.conf.blk, r->req.sg, r->sector,
 | |
|                                      scsi_dma_complete, r);
 | |
|     } else {
 | |
|         n = r->qiov.size / 512;
 | |
|         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct,
 | |
|                          n * BDRV_SECTOR_SIZE, BLOCK_ACCT_WRITE);
 | |
|         r->req.aiocb = blk_aio_writev(s->qdev.conf.blk, r->sector, &r->qiov, n,
 | |
|                                       scsi_write_complete, r);
 | |
|     }
 | |
| }
 | |
| 
 | |
| /* Return a pointer to the data buffer.  */
 | |
| static uint8_t *scsi_get_buf(SCSIRequest *req)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
| 
 | |
|     return (uint8_t *)r->iov.iov_base;
 | |
| }
 | |
| 
 | |
| static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
 | |
|     int buflen = 0;
 | |
|     int start;
 | |
| 
 | |
|     if (req->cmd.buf[1] & 0x1) {
 | |
|         /* Vital product data */
 | |
|         uint8_t page_code = req->cmd.buf[2];
 | |
| 
 | |
|         outbuf[buflen++] = s->qdev.type & 0x1f;
 | |
|         outbuf[buflen++] = page_code ; // this page
 | |
|         outbuf[buflen++] = 0x00;
 | |
|         outbuf[buflen++] = 0x00;
 | |
|         start = buflen;
 | |
| 
 | |
|         switch (page_code) {
 | |
|         case 0x00: /* Supported page codes, mandatory */
 | |
|         {
 | |
|             DPRINTF("Inquiry EVPD[Supported pages] "
 | |
|                     "buffer size %zd\n", req->cmd.xfer);
 | |
|             outbuf[buflen++] = 0x00; // list of supported pages (this page)
 | |
|             if (s->serial) {
 | |
|                 outbuf[buflen++] = 0x80; // unit serial number
 | |
|             }
 | |
|             outbuf[buflen++] = 0x83; // device identification
 | |
|             if (s->qdev.type == TYPE_DISK) {
 | |
|                 outbuf[buflen++] = 0xb0; // block limits
 | |
|                 outbuf[buflen++] = 0xb2; // thin provisioning
 | |
|             }
 | |
|             break;
 | |
|         }
 | |
|         case 0x80: /* Device serial number, optional */
 | |
|         {
 | |
|             int l;
 | |
| 
 | |
|             if (!s->serial) {
 | |
|                 DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
 | |
|                 return -1;
 | |
|             }
 | |
| 
 | |
|             l = strlen(s->serial);
 | |
|             if (l > 20) {
 | |
|                 l = 20;
 | |
|             }
 | |
| 
 | |
|             DPRINTF("Inquiry EVPD[Serial number] "
 | |
|                     "buffer size %zd\n", req->cmd.xfer);
 | |
|             memcpy(outbuf+buflen, s->serial, l);
 | |
|             buflen += l;
 | |
|             break;
 | |
|         }
 | |
| 
 | |
|         case 0x83: /* Device identification page, mandatory */
 | |
|         {
 | |
|             const char *str = s->serial ?: blk_name(s->qdev.conf.blk);
 | |
|             int max_len = s->serial ? 20 : 255 - 8;
 | |
|             int id_len = strlen(str);
 | |
| 
 | |
|             if (id_len > max_len) {
 | |
|                 id_len = max_len;
 | |
|             }
 | |
|             DPRINTF("Inquiry EVPD[Device identification] "
 | |
|                     "buffer size %zd\n", req->cmd.xfer);
 | |
| 
 | |
|             outbuf[buflen++] = 0x2; // ASCII
 | |
|             outbuf[buflen++] = 0;   // not officially assigned
 | |
|             outbuf[buflen++] = 0;   // reserved
 | |
|             outbuf[buflen++] = id_len; // length of data following
 | |
|             memcpy(outbuf+buflen, str, id_len);
 | |
|             buflen += id_len;
 | |
| 
 | |
|             if (s->qdev.wwn) {
 | |
|                 outbuf[buflen++] = 0x1; // Binary
 | |
|                 outbuf[buflen++] = 0x3; // NAA
 | |
|                 outbuf[buflen++] = 0;   // reserved
 | |
|                 outbuf[buflen++] = 8;
 | |
|                 stq_be_p(&outbuf[buflen], s->qdev.wwn);
 | |
|                 buflen += 8;
 | |
|             }
 | |
| 
 | |
|             if (s->qdev.port_wwn) {
 | |
|                 outbuf[buflen++] = 0x61; // SAS / Binary
 | |
|                 outbuf[buflen++] = 0x93; // PIV / Target port / NAA
 | |
|                 outbuf[buflen++] = 0;    // reserved
 | |
|                 outbuf[buflen++] = 8;
 | |
|                 stq_be_p(&outbuf[buflen], s->qdev.port_wwn);
 | |
|                 buflen += 8;
 | |
|             }
 | |
| 
 | |
|             if (s->port_index) {
 | |
|                 outbuf[buflen++] = 0x61; // SAS / Binary
 | |
|                 outbuf[buflen++] = 0x94; // PIV / Target port / relative target port
 | |
|                 outbuf[buflen++] = 0;    // reserved
 | |
|                 outbuf[buflen++] = 4;
 | |
|                 stw_be_p(&outbuf[buflen + 2], s->port_index);
 | |
|                 buflen += 4;
 | |
|             }
 | |
|             break;
 | |
|         }
 | |
|         case 0xb0: /* block limits */
 | |
|         {
 | |
|             unsigned int unmap_sectors =
 | |
|                     s->qdev.conf.discard_granularity / s->qdev.blocksize;
 | |
|             unsigned int min_io_size =
 | |
|                     s->qdev.conf.min_io_size / s->qdev.blocksize;
 | |
|             unsigned int opt_io_size =
 | |
|                     s->qdev.conf.opt_io_size / s->qdev.blocksize;
 | |
|             unsigned int max_unmap_sectors =
 | |
|                     s->max_unmap_size / s->qdev.blocksize;
 | |
|             unsigned int max_io_sectors =
 | |
|                     s->max_io_size / s->qdev.blocksize;
 | |
| 
 | |
|             if (s->qdev.type == TYPE_ROM) {
 | |
|                 DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
 | |
|                         page_code);
 | |
|                 return -1;
 | |
|             }
 | |
|             /* required VPD size with unmap support */
 | |
|             buflen = 0x40;
 | |
|             memset(outbuf + 4, 0, buflen - 4);
 | |
| 
 | |
|             outbuf[4] = 0x1; /* wsnz */
 | |
| 
 | |
|             /* optimal transfer length granularity */
 | |
|             outbuf[6] = (min_io_size >> 8) & 0xff;
 | |
|             outbuf[7] = min_io_size & 0xff;
 | |
| 
 | |
|             /* maximum transfer length */
 | |
|             outbuf[8] = (max_io_sectors >> 24) & 0xff;
 | |
|             outbuf[9] = (max_io_sectors >> 16) & 0xff;
 | |
|             outbuf[10] = (max_io_sectors >> 8) & 0xff;
 | |
|             outbuf[11] = max_io_sectors & 0xff;
 | |
| 
 | |
|             /* optimal transfer length */
 | |
|             outbuf[12] = (opt_io_size >> 24) & 0xff;
 | |
|             outbuf[13] = (opt_io_size >> 16) & 0xff;
 | |
|             outbuf[14] = (opt_io_size >> 8) & 0xff;
 | |
|             outbuf[15] = opt_io_size & 0xff;
 | |
| 
 | |
|             /* max unmap LBA count, default is 1GB */
 | |
|             outbuf[20] = (max_unmap_sectors >> 24) & 0xff;
 | |
|             outbuf[21] = (max_unmap_sectors >> 16) & 0xff;
 | |
|             outbuf[22] = (max_unmap_sectors >> 8) & 0xff;
 | |
|             outbuf[23] = max_unmap_sectors & 0xff;
 | |
| 
 | |
|             /* max unmap descriptors, 255 fit in 4 kb with an 8-byte header.  */
 | |
|             outbuf[24] = 0;
 | |
|             outbuf[25] = 0;
 | |
|             outbuf[26] = 0;
 | |
|             outbuf[27] = 255;
 | |
| 
 | |
|             /* optimal unmap granularity */
 | |
|             outbuf[28] = (unmap_sectors >> 24) & 0xff;
 | |
|             outbuf[29] = (unmap_sectors >> 16) & 0xff;
 | |
|             outbuf[30] = (unmap_sectors >> 8) & 0xff;
 | |
|             outbuf[31] = unmap_sectors & 0xff;
 | |
| 
 | |
|             /* max write same size */
 | |
|             outbuf[36] = 0;
 | |
|             outbuf[37] = 0;
 | |
|             outbuf[38] = 0;
 | |
|             outbuf[39] = 0;
 | |
| 
 | |
|             outbuf[40] = (max_io_sectors >> 24) & 0xff;
 | |
|             outbuf[41] = (max_io_sectors >> 16) & 0xff;
 | |
|             outbuf[42] = (max_io_sectors >> 8) & 0xff;
 | |
|             outbuf[43] = max_io_sectors & 0xff;
 | |
|             break;
 | |
|         }
 | |
|         case 0xb2: /* thin provisioning */
 | |
|         {
 | |
|             buflen = 8;
 | |
|             outbuf[4] = 0;
 | |
|             outbuf[5] = 0xe0; /* unmap & write_same 10/16 all supported */
 | |
|             outbuf[6] = s->qdev.conf.discard_granularity ? 2 : 1;
 | |
|             outbuf[7] = 0;
 | |
|             break;
 | |
|         }
 | |
|         default:
 | |
|             return -1;
 | |
|         }
 | |
|         /* done with EVPD */
 | |
|         assert(buflen - start <= 255);
 | |
|         outbuf[start - 1] = buflen - start;
 | |
|         return buflen;
 | |
|     }
 | |
| 
 | |
|     /* Standard INQUIRY data */
 | |
|     if (req->cmd.buf[2] != 0) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     /* PAGE CODE == 0 */
 | |
|     buflen = req->cmd.xfer;
 | |
|     if (buflen > SCSI_MAX_INQUIRY_LEN) {
 | |
|         buflen = SCSI_MAX_INQUIRY_LEN;
 | |
|     }
 | |
| 
 | |
|     outbuf[0] = s->qdev.type & 0x1f;
 | |
|     outbuf[1] = (s->features & (1 << SCSI_DISK_F_REMOVABLE)) ? 0x80 : 0;
 | |
| 
 | |
|     strpadcpy((char *) &outbuf[16], 16, s->product, ' ');
 | |
|     strpadcpy((char *) &outbuf[8], 8, s->vendor, ' ');
 | |
| 
 | |
|     memset(&outbuf[32], 0, 4);
 | |
|     memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
 | |
|     /*
 | |
|      * We claim conformance to SPC-3, which is required for guests
 | |
|      * to ask for modern features like READ CAPACITY(16) or the
 | |
|      * block characteristics VPD page by default.  Not all of SPC-3
 | |
|      * is actually implemented, but we're good enough.
 | |
|      */
 | |
|     outbuf[2] = 5;
 | |
|     outbuf[3] = 2 | 0x10; /* Format 2, HiSup */
 | |
| 
 | |
|     if (buflen > 36) {
 | |
|         outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
 | |
|     } else {
 | |
|         /* If the allocation length of CDB is too small,
 | |
|                the additional length is not adjusted */
 | |
|         outbuf[4] = 36 - 5;
 | |
|     }
 | |
| 
 | |
|     /* Sync data transfer and TCQ.  */
 | |
|     outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
 | |
|     return buflen;
 | |
| }
 | |
| 
 | |
| static inline bool media_is_dvd(SCSIDiskState *s)
 | |
| {
 | |
|     uint64_t nb_sectors;
 | |
|     if (s->qdev.type != TYPE_ROM) {
 | |
|         return false;
 | |
|     }
 | |
|     if (!blk_is_inserted(s->qdev.conf.blk)) {
 | |
|         return false;
 | |
|     }
 | |
|     if (s->tray_open) {
 | |
|         return false;
 | |
|     }
 | |
|     blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
 | |
|     return nb_sectors > CD_MAX_SECTORS;
 | |
| }
 | |
| 
 | |
| static inline bool media_is_cd(SCSIDiskState *s)
 | |
| {
 | |
|     uint64_t nb_sectors;
 | |
|     if (s->qdev.type != TYPE_ROM) {
 | |
|         return false;
 | |
|     }
 | |
|     if (!blk_is_inserted(s->qdev.conf.blk)) {
 | |
|         return false;
 | |
|     }
 | |
|     if (s->tray_open) {
 | |
|         return false;
 | |
|     }
 | |
|     blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
 | |
|     return nb_sectors <= CD_MAX_SECTORS;
 | |
| }
 | |
| 
 | |
| static int scsi_read_disc_information(SCSIDiskState *s, SCSIDiskReq *r,
 | |
|                                       uint8_t *outbuf)
 | |
| {
 | |
|     uint8_t type = r->req.cmd.buf[1] & 7;
 | |
| 
 | |
|     if (s->qdev.type != TYPE_ROM) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     /* Types 1/2 are only defined for Blu-Ray.  */
 | |
|     if (type != 0) {
 | |
|         scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     memset(outbuf, 0, 34);
 | |
|     outbuf[1] = 32;
 | |
|     outbuf[2] = 0xe; /* last session complete, disc finalized */
 | |
|     outbuf[3] = 1;   /* first track on disc */
 | |
|     outbuf[4] = 1;   /* # of sessions */
 | |
|     outbuf[5] = 1;   /* first track of last session */
 | |
|     outbuf[6] = 1;   /* last track of last session */
 | |
|     outbuf[7] = 0x20; /* unrestricted use */
 | |
|     outbuf[8] = 0x00; /* CD-ROM or DVD-ROM */
 | |
|     /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
 | |
|     /* 12-23: not meaningful for CD-ROM or DVD-ROM */
 | |
|     /* 24-31: disc bar code */
 | |
|     /* 32: disc application code */
 | |
|     /* 33: number of OPC tables */
 | |
| 
 | |
|     return 34;
 | |
| }
 | |
| 
 | |
| static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
 | |
|                                    uint8_t *outbuf)
 | |
| {
 | |
|     static const int rds_caps_size[5] = {
 | |
|         [0] = 2048 + 4,
 | |
|         [1] = 4 + 4,
 | |
|         [3] = 188 + 4,
 | |
|         [4] = 2048 + 4,
 | |
|     };
 | |
| 
 | |
|     uint8_t media = r->req.cmd.buf[1];
 | |
|     uint8_t layer = r->req.cmd.buf[6];
 | |
|     uint8_t format = r->req.cmd.buf[7];
 | |
|     int size = -1;
 | |
| 
 | |
|     if (s->qdev.type != TYPE_ROM) {
 | |
|         return -1;
 | |
|     }
 | |
|     if (media != 0) {
 | |
|         scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     if (format != 0xff) {
 | |
|         if (s->tray_open || !blk_is_inserted(s->qdev.conf.blk)) {
 | |
|             scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
 | |
|             return -1;
 | |
|         }
 | |
|         if (media_is_cd(s)) {
 | |
|             scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
 | |
|             return -1;
 | |
|         }
 | |
|         if (format >= ARRAY_SIZE(rds_caps_size)) {
 | |
|             return -1;
 | |
|         }
 | |
|         size = rds_caps_size[format];
 | |
|         memset(outbuf, 0, size);
 | |
|     }
 | |
| 
 | |
|     switch (format) {
 | |
|     case 0x00: {
 | |
|         /* Physical format information */
 | |
|         uint64_t nb_sectors;
 | |
|         if (layer != 0) {
 | |
|             goto fail;
 | |
|         }
 | |
|         blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
 | |
| 
 | |
|         outbuf[4] = 1;   /* DVD-ROM, part version 1 */
 | |
|         outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
 | |
|         outbuf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
 | |
|         outbuf[7] = 0;   /* default densities */
 | |
| 
 | |
|         stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
 | |
|         stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
 | |
|         break;
 | |
|     }
 | |
| 
 | |
|     case 0x01: /* DVD copyright information, all zeros */
 | |
|         break;
 | |
| 
 | |
|     case 0x03: /* BCA information - invalid field for no BCA info */
 | |
|         return -1;
 | |
| 
 | |
|     case 0x04: /* DVD disc manufacturing information, all zeros */
 | |
|         break;
 | |
| 
 | |
|     case 0xff: { /* List capabilities */
 | |
|         int i;
 | |
|         size = 4;
 | |
|         for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
 | |
|             if (!rds_caps_size[i]) {
 | |
|                 continue;
 | |
|             }
 | |
|             outbuf[size] = i;
 | |
|             outbuf[size + 1] = 0x40; /* Not writable, readable */
 | |
|             stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
 | |
|             size += 4;
 | |
|         }
 | |
|         break;
 | |
|      }
 | |
| 
 | |
|     default:
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     /* Size of buffer, not including 2 byte size field */
 | |
|     stw_be_p(outbuf, size - 2);
 | |
|     return size;
 | |
| 
 | |
| fail:
 | |
|     return -1;
 | |
| }
 | |
| 
 | |
| static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
 | |
| {
 | |
|     uint8_t event_code, media_status;
 | |
| 
 | |
|     media_status = 0;
 | |
|     if (s->tray_open) {
 | |
|         media_status = MS_TRAY_OPEN;
 | |
|     } else if (blk_is_inserted(s->qdev.conf.blk)) {
 | |
|         media_status = MS_MEDIA_PRESENT;
 | |
|     }
 | |
| 
 | |
|     /* Event notification descriptor */
 | |
|     event_code = MEC_NO_CHANGE;
 | |
|     if (media_status != MS_TRAY_OPEN) {
 | |
|         if (s->media_event) {
 | |
|             event_code = MEC_NEW_MEDIA;
 | |
|             s->media_event = false;
 | |
|         } else if (s->eject_request) {
 | |
|             event_code = MEC_EJECT_REQUESTED;
 | |
|             s->eject_request = false;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     outbuf[0] = event_code;
 | |
|     outbuf[1] = media_status;
 | |
| 
 | |
|     /* These fields are reserved, just clear them. */
 | |
|     outbuf[2] = 0;
 | |
|     outbuf[3] = 0;
 | |
|     return 4;
 | |
| }
 | |
| 
 | |
| static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
 | |
|                                               uint8_t *outbuf)
 | |
| {
 | |
|     int size;
 | |
|     uint8_t *buf = r->req.cmd.buf;
 | |
|     uint8_t notification_class_request = buf[4];
 | |
|     if (s->qdev.type != TYPE_ROM) {
 | |
|         return -1;
 | |
|     }
 | |
|     if ((buf[1] & 1) == 0) {
 | |
|         /* asynchronous */
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     size = 4;
 | |
|     outbuf[0] = outbuf[1] = 0;
 | |
|     outbuf[3] = 1 << GESN_MEDIA; /* supported events */
 | |
|     if (notification_class_request & (1 << GESN_MEDIA)) {
 | |
|         outbuf[2] = GESN_MEDIA;
 | |
|         size += scsi_event_status_media(s, &outbuf[size]);
 | |
|     } else {
 | |
|         outbuf[2] = 0x80;
 | |
|     }
 | |
|     stw_be_p(outbuf, size - 4);
 | |
|     return size;
 | |
| }
 | |
| 
 | |
| static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
 | |
| {
 | |
|     int current;
 | |
| 
 | |
|     if (s->qdev.type != TYPE_ROM) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     if (media_is_dvd(s)) {
 | |
|         current = MMC_PROFILE_DVD_ROM;
 | |
|     } else if (media_is_cd(s)) {
 | |
|         current = MMC_PROFILE_CD_ROM;
 | |
|     } else {
 | |
|         current = MMC_PROFILE_NONE;
 | |
|     }
 | |
| 
 | |
|     memset(outbuf, 0, 40);
 | |
|     stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
 | |
|     stw_be_p(&outbuf[6], current);
 | |
|     /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
 | |
|     outbuf[10] = 0x03; /* persistent, current */
 | |
|     outbuf[11] = 8; /* two profiles */
 | |
|     stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
 | |
|     outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
 | |
|     stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
 | |
|     outbuf[18] = (current == MMC_PROFILE_CD_ROM);
 | |
|     /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
 | |
|     stw_be_p(&outbuf[20], 1);
 | |
|     outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
 | |
|     outbuf[23] = 8;
 | |
|     stl_be_p(&outbuf[24], 1); /* SCSI */
 | |
|     outbuf[28] = 1; /* DBE = 1, mandatory */
 | |
|     /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
 | |
|     stw_be_p(&outbuf[32], 3);
 | |
|     outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
 | |
|     outbuf[35] = 4;
 | |
|     outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
 | |
|     /* TODO: Random readable, CD read, DVD read, drive serial number,
 | |
|        power management */
 | |
|     return 40;
 | |
| }
 | |
| 
 | |
| static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
 | |
| {
 | |
|     if (s->qdev.type != TYPE_ROM) {
 | |
|         return -1;
 | |
|     }
 | |
|     memset(outbuf, 0, 8);
 | |
|     outbuf[5] = 1; /* CD-ROM */
 | |
|     return 8;
 | |
| }
 | |
| 
 | |
| static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
 | |
|                            int page_control)
 | |
| {
 | |
|     static const int mode_sense_valid[0x3f] = {
 | |
|         [MODE_PAGE_HD_GEOMETRY]            = (1 << TYPE_DISK),
 | |
|         [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
 | |
|         [MODE_PAGE_CACHING]                = (1 << TYPE_DISK) | (1 << TYPE_ROM),
 | |
|         [MODE_PAGE_R_W_ERROR]              = (1 << TYPE_DISK) | (1 << TYPE_ROM),
 | |
|         [MODE_PAGE_AUDIO_CTL]              = (1 << TYPE_ROM),
 | |
|         [MODE_PAGE_CAPABILITIES]           = (1 << TYPE_ROM),
 | |
|     };
 | |
| 
 | |
|     uint8_t *p = *p_outbuf + 2;
 | |
|     int length;
 | |
| 
 | |
|     if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     /*
 | |
|      * If Changeable Values are requested, a mask denoting those mode parameters
 | |
|      * that are changeable shall be returned. As we currently don't support
 | |
|      * parameter changes via MODE_SELECT all bits are returned set to zero.
 | |
|      * The buffer was already menset to zero by the caller of this function.
 | |
|      *
 | |
|      * The offsets here are off by two compared to the descriptions in the
 | |
|      * SCSI specs, because those include a 2-byte header.  This is unfortunate,
 | |
|      * but it is done so that offsets are consistent within our implementation
 | |
|      * of MODE SENSE and MODE SELECT.  MODE SELECT has to deal with both
 | |
|      * 2-byte and 4-byte headers.
 | |
|      */
 | |
|     switch (page) {
 | |
|     case MODE_PAGE_HD_GEOMETRY:
 | |
|         length = 0x16;
 | |
|         if (page_control == 1) { /* Changeable Values */
 | |
|             break;
 | |
|         }
 | |
|         /* if a geometry hint is available, use it */
 | |
|         p[0] = (s->qdev.conf.cyls >> 16) & 0xff;
 | |
|         p[1] = (s->qdev.conf.cyls >> 8) & 0xff;
 | |
|         p[2] = s->qdev.conf.cyls & 0xff;
 | |
|         p[3] = s->qdev.conf.heads & 0xff;
 | |
|         /* Write precomp start cylinder, disabled */
 | |
|         p[4] = (s->qdev.conf.cyls >> 16) & 0xff;
 | |
|         p[5] = (s->qdev.conf.cyls >> 8) & 0xff;
 | |
|         p[6] = s->qdev.conf.cyls & 0xff;
 | |
|         /* Reduced current start cylinder, disabled */
 | |
|         p[7] = (s->qdev.conf.cyls >> 16) & 0xff;
 | |
|         p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
 | |
|         p[9] = s->qdev.conf.cyls & 0xff;
 | |
|         /* Device step rate [ns], 200ns */
 | |
|         p[10] = 0;
 | |
|         p[11] = 200;
 | |
|         /* Landing zone cylinder */
 | |
|         p[12] = 0xff;
 | |
|         p[13] =  0xff;
 | |
|         p[14] = 0xff;
 | |
|         /* Medium rotation rate [rpm], 5400 rpm */
 | |
|         p[18] = (5400 >> 8) & 0xff;
 | |
|         p[19] = 5400 & 0xff;
 | |
|         break;
 | |
| 
 | |
|     case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
 | |
|         length = 0x1e;
 | |
|         if (page_control == 1) { /* Changeable Values */
 | |
|             break;
 | |
|         }
 | |
|         /* Transfer rate [kbit/s], 5Mbit/s */
 | |
|         p[0] = 5000 >> 8;
 | |
|         p[1] = 5000 & 0xff;
 | |
|         /* if a geometry hint is available, use it */
 | |
|         p[2] = s->qdev.conf.heads & 0xff;
 | |
|         p[3] = s->qdev.conf.secs & 0xff;
 | |
|         p[4] = s->qdev.blocksize >> 8;
 | |
|         p[6] = (s->qdev.conf.cyls >> 8) & 0xff;
 | |
|         p[7] = s->qdev.conf.cyls & 0xff;
 | |
|         /* Write precomp start cylinder, disabled */
 | |
|         p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
 | |
|         p[9] = s->qdev.conf.cyls & 0xff;
 | |
|         /* Reduced current start cylinder, disabled */
 | |
|         p[10] = (s->qdev.conf.cyls >> 8) & 0xff;
 | |
|         p[11] = s->qdev.conf.cyls & 0xff;
 | |
|         /* Device step rate [100us], 100us */
 | |
|         p[12] = 0;
 | |
|         p[13] = 1;
 | |
|         /* Device step pulse width [us], 1us */
 | |
|         p[14] = 1;
 | |
|         /* Device head settle delay [100us], 100us */
 | |
|         p[15] = 0;
 | |
|         p[16] = 1;
 | |
|         /* Motor on delay [0.1s], 0.1s */
 | |
|         p[17] = 1;
 | |
|         /* Motor off delay [0.1s], 0.1s */
 | |
|         p[18] = 1;
 | |
|         /* Medium rotation rate [rpm], 5400 rpm */
 | |
|         p[26] = (5400 >> 8) & 0xff;
 | |
|         p[27] = 5400 & 0xff;
 | |
|         break;
 | |
| 
 | |
|     case MODE_PAGE_CACHING:
 | |
|         length = 0x12;
 | |
|         if (page_control == 1 || /* Changeable Values */
 | |
|             blk_enable_write_cache(s->qdev.conf.blk)) {
 | |
|             p[0] = 4; /* WCE */
 | |
|         }
 | |
|         break;
 | |
| 
 | |
|     case MODE_PAGE_R_W_ERROR:
 | |
|         length = 10;
 | |
|         if (page_control == 1) { /* Changeable Values */
 | |
|             break;
 | |
|         }
 | |
|         p[0] = 0x80; /* Automatic Write Reallocation Enabled */
 | |
|         if (s->qdev.type == TYPE_ROM) {
 | |
|             p[1] = 0x20; /* Read Retry Count */
 | |
|         }
 | |
|         break;
 | |
| 
 | |
|     case MODE_PAGE_AUDIO_CTL:
 | |
|         length = 14;
 | |
|         break;
 | |
| 
 | |
|     case MODE_PAGE_CAPABILITIES:
 | |
|         length = 0x14;
 | |
|         if (page_control == 1) { /* Changeable Values */
 | |
|             break;
 | |
|         }
 | |
| 
 | |
|         p[0] = 0x3b; /* CD-R & CD-RW read */
 | |
|         p[1] = 0; /* Writing not supported */
 | |
|         p[2] = 0x7f; /* Audio, composite, digital out,
 | |
|                         mode 2 form 1&2, multi session */
 | |
|         p[3] = 0xff; /* CD DA, DA accurate, RW supported,
 | |
|                         RW corrected, C2 errors, ISRC,
 | |
|                         UPC, Bar code */
 | |
|         p[4] = 0x2d | (s->tray_locked ? 2 : 0);
 | |
|         /* Locking supported, jumper present, eject, tray */
 | |
|         p[5] = 0; /* no volume & mute control, no
 | |
|                      changer */
 | |
|         p[6] = (50 * 176) >> 8; /* 50x read speed */
 | |
|         p[7] = (50 * 176) & 0xff;
 | |
|         p[8] = 2 >> 8; /* Two volume levels */
 | |
|         p[9] = 2 & 0xff;
 | |
|         p[10] = 2048 >> 8; /* 2M buffer */
 | |
|         p[11] = 2048 & 0xff;
 | |
|         p[12] = (16 * 176) >> 8; /* 16x read speed current */
 | |
|         p[13] = (16 * 176) & 0xff;
 | |
|         p[16] = (16 * 176) >> 8; /* 16x write speed */
 | |
|         p[17] = (16 * 176) & 0xff;
 | |
|         p[18] = (16 * 176) >> 8; /* 16x write speed current */
 | |
|         p[19] = (16 * 176) & 0xff;
 | |
|         break;
 | |
| 
 | |
|     default:
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     assert(length < 256);
 | |
|     (*p_outbuf)[0] = page;
 | |
|     (*p_outbuf)[1] = length;
 | |
|     *p_outbuf += length + 2;
 | |
|     return length + 2;
 | |
| }
 | |
| 
 | |
| static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     uint64_t nb_sectors;
 | |
|     bool dbd;
 | |
|     int page, buflen, ret, page_control;
 | |
|     uint8_t *p;
 | |
|     uint8_t dev_specific_param;
 | |
| 
 | |
|     dbd = (r->req.cmd.buf[1] & 0x8) != 0;
 | |
|     page = r->req.cmd.buf[2] & 0x3f;
 | |
|     page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
 | |
|     DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
 | |
|         (r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
 | |
|     memset(outbuf, 0, r->req.cmd.xfer);
 | |
|     p = outbuf;
 | |
| 
 | |
|     if (s->qdev.type == TYPE_DISK) {
 | |
|         dev_specific_param = s->features & (1 << SCSI_DISK_F_DPOFUA) ? 0x10 : 0;
 | |
|         if (blk_is_read_only(s->qdev.conf.blk)) {
 | |
|             dev_specific_param |= 0x80; /* Readonly.  */
 | |
|         }
 | |
|     } else {
 | |
|         /* MMC prescribes that CD/DVD drives have no block descriptors,
 | |
|          * and defines no device-specific parameter.  */
 | |
|         dev_specific_param = 0x00;
 | |
|         dbd = true;
 | |
|     }
 | |
| 
 | |
|     if (r->req.cmd.buf[0] == MODE_SENSE) {
 | |
|         p[1] = 0; /* Default media type.  */
 | |
|         p[2] = dev_specific_param;
 | |
|         p[3] = 0; /* Block descriptor length.  */
 | |
|         p += 4;
 | |
|     } else { /* MODE_SENSE_10 */
 | |
|         p[2] = 0; /* Default media type.  */
 | |
|         p[3] = dev_specific_param;
 | |
|         p[6] = p[7] = 0; /* Block descriptor length.  */
 | |
|         p += 8;
 | |
|     }
 | |
| 
 | |
|     blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
 | |
|     if (!dbd && nb_sectors) {
 | |
|         if (r->req.cmd.buf[0] == MODE_SENSE) {
 | |
|             outbuf[3] = 8; /* Block descriptor length  */
 | |
|         } else { /* MODE_SENSE_10 */
 | |
|             outbuf[7] = 8; /* Block descriptor length  */
 | |
|         }
 | |
|         nb_sectors /= (s->qdev.blocksize / 512);
 | |
|         if (nb_sectors > 0xffffff) {
 | |
|             nb_sectors = 0;
 | |
|         }
 | |
|         p[0] = 0; /* media density code */
 | |
|         p[1] = (nb_sectors >> 16) & 0xff;
 | |
|         p[2] = (nb_sectors >> 8) & 0xff;
 | |
|         p[3] = nb_sectors & 0xff;
 | |
|         p[4] = 0; /* reserved */
 | |
|         p[5] = 0; /* bytes 5-7 are the sector size in bytes */
 | |
|         p[6] = s->qdev.blocksize >> 8;
 | |
|         p[7] = 0;
 | |
|         p += 8;
 | |
|     }
 | |
| 
 | |
|     if (page_control == 3) {
 | |
|         /* Saved Values */
 | |
|         scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     if (page == 0x3f) {
 | |
|         for (page = 0; page <= 0x3e; page++) {
 | |
|             mode_sense_page(s, page, &p, page_control);
 | |
|         }
 | |
|     } else {
 | |
|         ret = mode_sense_page(s, page, &p, page_control);
 | |
|         if (ret == -1) {
 | |
|             return -1;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     buflen = p - outbuf;
 | |
|     /*
 | |
|      * The mode data length field specifies the length in bytes of the
 | |
|      * following data that is available to be transferred. The mode data
 | |
|      * length does not include itself.
 | |
|      */
 | |
|     if (r->req.cmd.buf[0] == MODE_SENSE) {
 | |
|         outbuf[0] = buflen - 1;
 | |
|     } else { /* MODE_SENSE_10 */
 | |
|         outbuf[0] = ((buflen - 2) >> 8) & 0xff;
 | |
|         outbuf[1] = (buflen - 2) & 0xff;
 | |
|     }
 | |
|     return buflen;
 | |
| }
 | |
| 
 | |
| static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
 | |
|     int start_track, format, msf, toclen;
 | |
|     uint64_t nb_sectors;
 | |
| 
 | |
|     msf = req->cmd.buf[1] & 2;
 | |
|     format = req->cmd.buf[2] & 0xf;
 | |
|     start_track = req->cmd.buf[6];
 | |
|     blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
 | |
|     DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
 | |
|     nb_sectors /= s->qdev.blocksize / 512;
 | |
|     switch (format) {
 | |
|     case 0:
 | |
|         toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
 | |
|         break;
 | |
|     case 1:
 | |
|         /* multi session : only a single session defined */
 | |
|         toclen = 12;
 | |
|         memset(outbuf, 0, 12);
 | |
|         outbuf[1] = 0x0a;
 | |
|         outbuf[2] = 0x01;
 | |
|         outbuf[3] = 0x01;
 | |
|         break;
 | |
|     case 2:
 | |
|         toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
 | |
|         break;
 | |
|     default:
 | |
|         return -1;
 | |
|     }
 | |
|     return toclen;
 | |
| }
 | |
| 
 | |
| static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
 | |
| {
 | |
|     SCSIRequest *req = &r->req;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
 | |
|     bool start = req->cmd.buf[4] & 1;
 | |
|     bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */
 | |
|     int pwrcnd = req->cmd.buf[4] & 0xf0;
 | |
| 
 | |
|     if (pwrcnd) {
 | |
|         /* eject/load only happens for power condition == 0 */
 | |
|         return 0;
 | |
|     }
 | |
| 
 | |
|     if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && loej) {
 | |
|         if (!start && !s->tray_open && s->tray_locked) {
 | |
|             scsi_check_condition(r,
 | |
|                                  blk_is_inserted(s->qdev.conf.blk)
 | |
|                                  ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
 | |
|                                  : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
 | |
|             return -1;
 | |
|         }
 | |
| 
 | |
|         if (s->tray_open != !start) {
 | |
|             blk_eject(s->qdev.conf.blk, !start);
 | |
|             s->tray_open = !start;
 | |
|         }
 | |
|     }
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| static void scsi_disk_emulate_read_data(SCSIRequest *req)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
|     int buflen = r->iov.iov_len;
 | |
| 
 | |
|     if (buflen) {
 | |
|         DPRINTF("Read buf_len=%d\n", buflen);
 | |
|         r->iov.iov_len = 0;
 | |
|         r->started = true;
 | |
|         scsi_req_data(&r->req, buflen);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     /* This also clears the sense buffer for REQUEST SENSE.  */
 | |
|     scsi_req_complete(&r->req, GOOD);
 | |
| }
 | |
| 
 | |
| static int scsi_disk_check_mode_select(SCSIDiskState *s, int page,
 | |
|                                        uint8_t *inbuf, int inlen)
 | |
| {
 | |
|     uint8_t mode_current[SCSI_MAX_MODE_LEN];
 | |
|     uint8_t mode_changeable[SCSI_MAX_MODE_LEN];
 | |
|     uint8_t *p;
 | |
|     int len, expected_len, changeable_len, i;
 | |
| 
 | |
|     /* The input buffer does not include the page header, so it is
 | |
|      * off by 2 bytes.
 | |
|      */
 | |
|     expected_len = inlen + 2;
 | |
|     if (expected_len > SCSI_MAX_MODE_LEN) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     p = mode_current;
 | |
|     memset(mode_current, 0, inlen + 2);
 | |
|     len = mode_sense_page(s, page, &p, 0);
 | |
|     if (len < 0 || len != expected_len) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     p = mode_changeable;
 | |
|     memset(mode_changeable, 0, inlen + 2);
 | |
|     changeable_len = mode_sense_page(s, page, &p, 1);
 | |
|     assert(changeable_len == len);
 | |
| 
 | |
|     /* Check that unchangeable bits are the same as what MODE SENSE
 | |
|      * would return.
 | |
|      */
 | |
|     for (i = 2; i < len; i++) {
 | |
|         if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) {
 | |
|             return -1;
 | |
|         }
 | |
|     }
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| static void scsi_disk_apply_mode_select(SCSIDiskState *s, int page, uint8_t *p)
 | |
| {
 | |
|     switch (page) {
 | |
|     case MODE_PAGE_CACHING:
 | |
|         blk_set_enable_write_cache(s->qdev.conf.blk, (p[0] & 4) != 0);
 | |
|         break;
 | |
| 
 | |
|     default:
 | |
|         break;
 | |
|     }
 | |
| }
 | |
| 
 | |
| static int mode_select_pages(SCSIDiskReq *r, uint8_t *p, int len, bool change)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
| 
 | |
|     while (len > 0) {
 | |
|         int page, subpage, page_len;
 | |
| 
 | |
|         /* Parse both possible formats for the mode page headers.  */
 | |
|         page = p[0] & 0x3f;
 | |
|         if (p[0] & 0x40) {
 | |
|             if (len < 4) {
 | |
|                 goto invalid_param_len;
 | |
|             }
 | |
|             subpage = p[1];
 | |
|             page_len = lduw_be_p(&p[2]);
 | |
|             p += 4;
 | |
|             len -= 4;
 | |
|         } else {
 | |
|             if (len < 2) {
 | |
|                 goto invalid_param_len;
 | |
|             }
 | |
|             subpage = 0;
 | |
|             page_len = p[1];
 | |
|             p += 2;
 | |
|             len -= 2;
 | |
|         }
 | |
| 
 | |
|         if (subpage) {
 | |
|             goto invalid_param;
 | |
|         }
 | |
|         if (page_len > len) {
 | |
|             goto invalid_param_len;
 | |
|         }
 | |
| 
 | |
|         if (!change) {
 | |
|             if (scsi_disk_check_mode_select(s, page, p, page_len) < 0) {
 | |
|                 goto invalid_param;
 | |
|             }
 | |
|         } else {
 | |
|             scsi_disk_apply_mode_select(s, page, p);
 | |
|         }
 | |
| 
 | |
|         p += page_len;
 | |
|         len -= page_len;
 | |
|     }
 | |
|     return 0;
 | |
| 
 | |
| invalid_param:
 | |
|     scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
 | |
|     return -1;
 | |
| 
 | |
| invalid_param_len:
 | |
|     scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
 | |
|     return -1;
 | |
| }
 | |
| 
 | |
| static void scsi_disk_emulate_mode_select(SCSIDiskReq *r, uint8_t *inbuf)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     uint8_t *p = inbuf;
 | |
|     int cmd = r->req.cmd.buf[0];
 | |
|     int len = r->req.cmd.xfer;
 | |
|     int hdr_len = (cmd == MODE_SELECT ? 4 : 8);
 | |
|     int bd_len;
 | |
|     int pass;
 | |
| 
 | |
|     /* We only support PF=1, SP=0.  */
 | |
|     if ((r->req.cmd.buf[1] & 0x11) != 0x10) {
 | |
|         goto invalid_field;
 | |
|     }
 | |
| 
 | |
|     if (len < hdr_len) {
 | |
|         goto invalid_param_len;
 | |
|     }
 | |
| 
 | |
|     bd_len = (cmd == MODE_SELECT ? p[3] : lduw_be_p(&p[6]));
 | |
|     len -= hdr_len;
 | |
|     p += hdr_len;
 | |
|     if (len < bd_len) {
 | |
|         goto invalid_param_len;
 | |
|     }
 | |
|     if (bd_len != 0 && bd_len != 8) {
 | |
|         goto invalid_param;
 | |
|     }
 | |
| 
 | |
|     len -= bd_len;
 | |
|     p += bd_len;
 | |
| 
 | |
|     /* Ensure no change is made if there is an error!  */
 | |
|     for (pass = 0; pass < 2; pass++) {
 | |
|         if (mode_select_pages(r, p, len, pass == 1) < 0) {
 | |
|             assert(pass == 0);
 | |
|             return;
 | |
|         }
 | |
|     }
 | |
|     if (!blk_enable_write_cache(s->qdev.conf.blk)) {
 | |
|         /* The request is used as the AIO opaque value, so add a ref.  */
 | |
|         scsi_req_ref(&r->req);
 | |
|         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0,
 | |
|                          BLOCK_ACCT_FLUSH);
 | |
|         r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     scsi_req_complete(&r->req, GOOD);
 | |
|     return;
 | |
| 
 | |
| invalid_param:
 | |
|     scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
 | |
|     return;
 | |
| 
 | |
| invalid_param_len:
 | |
|     scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
 | |
|     return;
 | |
| 
 | |
| invalid_field:
 | |
|     scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
| }
 | |
| 
 | |
| static inline bool check_lba_range(SCSIDiskState *s,
 | |
|                                    uint64_t sector_num, uint32_t nb_sectors)
 | |
| {
 | |
|     /*
 | |
|      * The first line tests that no overflow happens when computing the last
 | |
|      * sector.  The second line tests that the last accessed sector is in
 | |
|      * range.
 | |
|      *
 | |
|      * Careful, the computations should not underflow for nb_sectors == 0,
 | |
|      * and a 0-block read to the first LBA beyond the end of device is
 | |
|      * valid.
 | |
|      */
 | |
|     return (sector_num <= sector_num + nb_sectors &&
 | |
|             sector_num + nb_sectors <= s->qdev.max_lba + 1);
 | |
| }
 | |
| 
 | |
| typedef struct UnmapCBData {
 | |
|     SCSIDiskReq *r;
 | |
|     uint8_t *inbuf;
 | |
|     int count;
 | |
| } UnmapCBData;
 | |
| 
 | |
| static void scsi_unmap_complete(void *opaque, int ret);
 | |
| 
 | |
| static void scsi_unmap_complete_noio(UnmapCBData *data, int ret)
 | |
| {
 | |
|     SCSIDiskReq *r = data->r;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     uint64_t sector_num;
 | |
|     uint32_t nb_sectors;
 | |
| 
 | |
|     assert(r->req.aiocb == NULL);
 | |
| 
 | |
|     if (r->req.io_canceled) {
 | |
|         scsi_req_cancel_complete(&r->req);
 | |
|         goto done;
 | |
|     }
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         if (scsi_handle_rw_error(r, -ret, false)) {
 | |
|             goto done;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     if (data->count > 0) {
 | |
|         sector_num = ldq_be_p(&data->inbuf[0]);
 | |
|         nb_sectors = ldl_be_p(&data->inbuf[8]) & 0xffffffffULL;
 | |
|         if (!check_lba_range(s, sector_num, nb_sectors)) {
 | |
|             scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
 | |
|             goto done;
 | |
|         }
 | |
| 
 | |
|         r->req.aiocb = blk_aio_discard(s->qdev.conf.blk,
 | |
|                                        sector_num * (s->qdev.blocksize / 512),
 | |
|                                        nb_sectors * (s->qdev.blocksize / 512),
 | |
|                                        scsi_unmap_complete, data);
 | |
|         data->count--;
 | |
|         data->inbuf += 16;
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     scsi_req_complete(&r->req, GOOD);
 | |
| 
 | |
| done:
 | |
|     scsi_req_unref(&r->req);
 | |
|     g_free(data);
 | |
| }
 | |
| 
 | |
| static void scsi_unmap_complete(void *opaque, int ret)
 | |
| {
 | |
|     UnmapCBData *data = opaque;
 | |
|     SCSIDiskReq *r = data->r;
 | |
| 
 | |
|     assert(r->req.aiocb != NULL);
 | |
|     r->req.aiocb = NULL;
 | |
| 
 | |
|     scsi_unmap_complete_noio(data, ret);
 | |
| }
 | |
| 
 | |
| static void scsi_disk_emulate_unmap(SCSIDiskReq *r, uint8_t *inbuf)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
|     uint8_t *p = inbuf;
 | |
|     int len = r->req.cmd.xfer;
 | |
|     UnmapCBData *data;
 | |
| 
 | |
|     /* Reject ANCHOR=1.  */
 | |
|     if (r->req.cmd.buf[1] & 0x1) {
 | |
|         goto invalid_field;
 | |
|     }
 | |
| 
 | |
|     if (len < 8) {
 | |
|         goto invalid_param_len;
 | |
|     }
 | |
|     if (len < lduw_be_p(&p[0]) + 2) {
 | |
|         goto invalid_param_len;
 | |
|     }
 | |
|     if (len < lduw_be_p(&p[2]) + 8) {
 | |
|         goto invalid_param_len;
 | |
|     }
 | |
|     if (lduw_be_p(&p[2]) & 15) {
 | |
|         goto invalid_param_len;
 | |
|     }
 | |
| 
 | |
|     if (blk_is_read_only(s->qdev.conf.blk)) {
 | |
|         scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     data = g_new0(UnmapCBData, 1);
 | |
|     data->r = r;
 | |
|     data->inbuf = &p[8];
 | |
|     data->count = lduw_be_p(&p[2]) >> 4;
 | |
| 
 | |
|     /* The matching unref is in scsi_unmap_complete, before data is freed.  */
 | |
|     scsi_req_ref(&r->req);
 | |
|     scsi_unmap_complete_noio(data, 0);
 | |
|     return;
 | |
| 
 | |
| invalid_param_len:
 | |
|     scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
 | |
|     return;
 | |
| 
 | |
| invalid_field:
 | |
|     scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
| }
 | |
| 
 | |
| typedef struct WriteSameCBData {
 | |
|     SCSIDiskReq *r;
 | |
|     int64_t sector;
 | |
|     int nb_sectors;
 | |
|     QEMUIOVector qiov;
 | |
|     struct iovec iov;
 | |
| } WriteSameCBData;
 | |
| 
 | |
| static void scsi_write_same_complete(void *opaque, int ret)
 | |
| {
 | |
|     WriteSameCBData *data = opaque;
 | |
|     SCSIDiskReq *r = data->r;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
 | |
| 
 | |
|     assert(r->req.aiocb != NULL);
 | |
|     r->req.aiocb = NULL;
 | |
|     if (r->req.io_canceled) {
 | |
|         scsi_req_cancel_complete(&r->req);
 | |
|         goto done;
 | |
|     }
 | |
| 
 | |
|     if (ret < 0) {
 | |
|         if (scsi_handle_rw_error(r, -ret, true)) {
 | |
|             goto done;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct);
 | |
| 
 | |
|     data->nb_sectors -= data->iov.iov_len / 512;
 | |
|     data->sector += data->iov.iov_len / 512;
 | |
|     data->iov.iov_len = MIN(data->nb_sectors * 512, data->iov.iov_len);
 | |
|     if (data->iov.iov_len) {
 | |
|         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct,
 | |
|                          data->iov.iov_len, BLOCK_ACCT_WRITE);
 | |
|         /* blk_aio_write doesn't like the qiov size being different from
 | |
|          * nb_sectors, make sure they match.
 | |
|          */
 | |
|         qemu_iovec_init_external(&data->qiov, &data->iov, 1);
 | |
|         r->req.aiocb = blk_aio_writev(s->qdev.conf.blk, data->sector,
 | |
|                                       &data->qiov, data->iov.iov_len / 512,
 | |
|                                       scsi_write_same_complete, data);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     scsi_req_complete(&r->req, GOOD);
 | |
| 
 | |
| done:
 | |
|     scsi_req_unref(&r->req);
 | |
|     qemu_vfree(data->iov.iov_base);
 | |
|     g_free(data);
 | |
| }
 | |
| 
 | |
| static void scsi_disk_emulate_write_same(SCSIDiskReq *r, uint8_t *inbuf)
 | |
| {
 | |
|     SCSIRequest *req = &r->req;
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
 | |
|     uint32_t nb_sectors = scsi_data_cdb_xfer(r->req.cmd.buf);
 | |
|     WriteSameCBData *data;
 | |
|     uint8_t *buf;
 | |
|     int i;
 | |
| 
 | |
|     /* Fail if PBDATA=1 or LBDATA=1 or ANCHOR=1.  */
 | |
|     if (nb_sectors == 0 || (req->cmd.buf[1] & 0x16)) {
 | |
|         scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     if (blk_is_read_only(s->qdev.conf.blk)) {
 | |
|         scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
 | |
|         return;
 | |
|     }
 | |
|     if (!check_lba_range(s, r->req.cmd.lba, nb_sectors)) {
 | |
|         scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     if (buffer_is_zero(inbuf, s->qdev.blocksize)) {
 | |
|         int flags = (req->cmd.buf[1] & 0x8) ? BDRV_REQ_MAY_UNMAP : 0;
 | |
| 
 | |
|         /* The request is used as the AIO opaque value, so add a ref.  */
 | |
|         scsi_req_ref(&r->req);
 | |
|         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct,
 | |
|                          nb_sectors * s->qdev.blocksize,
 | |
|                         BLOCK_ACCT_WRITE);
 | |
|         r->req.aiocb = blk_aio_write_zeroes(s->qdev.conf.blk,
 | |
|                                 r->req.cmd.lba * (s->qdev.blocksize / 512),
 | |
|                                 nb_sectors * (s->qdev.blocksize / 512),
 | |
|                                 flags, scsi_aio_complete, r);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     data = g_new0(WriteSameCBData, 1);
 | |
|     data->r = r;
 | |
|     data->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
 | |
|     data->nb_sectors = nb_sectors * (s->qdev.blocksize / 512);
 | |
|     data->iov.iov_len = MIN(data->nb_sectors * 512, SCSI_WRITE_SAME_MAX);
 | |
|     data->iov.iov_base = buf = blk_blockalign(s->qdev.conf.blk,
 | |
|                                               data->iov.iov_len);
 | |
|     qemu_iovec_init_external(&data->qiov, &data->iov, 1);
 | |
| 
 | |
|     for (i = 0; i < data->iov.iov_len; i += s->qdev.blocksize) {
 | |
|         memcpy(&buf[i], inbuf, s->qdev.blocksize);
 | |
|     }
 | |
| 
 | |
|     scsi_req_ref(&r->req);
 | |
|     block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct,
 | |
|                      data->iov.iov_len, BLOCK_ACCT_WRITE);
 | |
|     r->req.aiocb = blk_aio_writev(s->qdev.conf.blk, data->sector,
 | |
|                                   &data->qiov, data->iov.iov_len / 512,
 | |
|                                   scsi_write_same_complete, data);
 | |
| }
 | |
| 
 | |
| static void scsi_disk_emulate_write_data(SCSIRequest *req)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
| 
 | |
|     if (r->iov.iov_len) {
 | |
|         int buflen = r->iov.iov_len;
 | |
|         DPRINTF("Write buf_len=%d\n", buflen);
 | |
|         r->iov.iov_len = 0;
 | |
|         scsi_req_data(&r->req, buflen);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     switch (req->cmd.buf[0]) {
 | |
|     case MODE_SELECT:
 | |
|     case MODE_SELECT_10:
 | |
|         /* This also clears the sense buffer for REQUEST SENSE.  */
 | |
|         scsi_disk_emulate_mode_select(r, r->iov.iov_base);
 | |
|         break;
 | |
| 
 | |
|     case UNMAP:
 | |
|         scsi_disk_emulate_unmap(r, r->iov.iov_base);
 | |
|         break;
 | |
| 
 | |
|     case VERIFY_10:
 | |
|     case VERIFY_12:
 | |
|     case VERIFY_16:
 | |
|         if (r->req.status == -1) {
 | |
|             scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
|         }
 | |
|         break;
 | |
| 
 | |
|     case WRITE_SAME_10:
 | |
|     case WRITE_SAME_16:
 | |
|         scsi_disk_emulate_write_same(r, r->iov.iov_base);
 | |
|         break;
 | |
| 
 | |
|     default:
 | |
|         abort();
 | |
|     }
 | |
| }
 | |
| 
 | |
| static int32_t scsi_disk_emulate_command(SCSIRequest *req, uint8_t *buf)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
 | |
|     uint64_t nb_sectors;
 | |
|     uint8_t *outbuf;
 | |
|     int buflen;
 | |
| 
 | |
|     switch (req->cmd.buf[0]) {
 | |
|     case INQUIRY:
 | |
|     case MODE_SENSE:
 | |
|     case MODE_SENSE_10:
 | |
|     case RESERVE:
 | |
|     case RESERVE_10:
 | |
|     case RELEASE:
 | |
|     case RELEASE_10:
 | |
|     case START_STOP:
 | |
|     case ALLOW_MEDIUM_REMOVAL:
 | |
|     case GET_CONFIGURATION:
 | |
|     case GET_EVENT_STATUS_NOTIFICATION:
 | |
|     case MECHANISM_STATUS:
 | |
|     case REQUEST_SENSE:
 | |
|         break;
 | |
| 
 | |
|     default:
 | |
|         if (s->tray_open || !blk_is_inserted(s->qdev.conf.blk)) {
 | |
|             scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
 | |
|             return 0;
 | |
|         }
 | |
|         break;
 | |
|     }
 | |
| 
 | |
|     /*
 | |
|      * FIXME: we shouldn't return anything bigger than 4k, but the code
 | |
|      * requires the buffer to be as big as req->cmd.xfer in several
 | |
|      * places.  So, do not allow CDBs with a very large ALLOCATION
 | |
|      * LENGTH.  The real fix would be to modify scsi_read_data and
 | |
|      * dma_buf_read, so that they return data beyond the buflen
 | |
|      * as all zeros.
 | |
|      */
 | |
|     if (req->cmd.xfer > 65536) {
 | |
|         goto illegal_request;
 | |
|     }
 | |
|     r->buflen = MAX(4096, req->cmd.xfer);
 | |
| 
 | |
|     if (!r->iov.iov_base) {
 | |
|         r->iov.iov_base = blk_blockalign(s->qdev.conf.blk, r->buflen);
 | |
|     }
 | |
| 
 | |
|     buflen = req->cmd.xfer;
 | |
|     outbuf = r->iov.iov_base;
 | |
|     memset(outbuf, 0, r->buflen);
 | |
|     switch (req->cmd.buf[0]) {
 | |
|     case TEST_UNIT_READY:
 | |
|         assert(!s->tray_open && blk_is_inserted(s->qdev.conf.blk));
 | |
|         break;
 | |
|     case INQUIRY:
 | |
|         buflen = scsi_disk_emulate_inquiry(req, outbuf);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case MODE_SENSE:
 | |
|     case MODE_SENSE_10:
 | |
|         buflen = scsi_disk_emulate_mode_sense(r, outbuf);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case READ_TOC:
 | |
|         buflen = scsi_disk_emulate_read_toc(req, outbuf);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case RESERVE:
 | |
|         if (req->cmd.buf[1] & 1) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case RESERVE_10:
 | |
|         if (req->cmd.buf[1] & 3) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case RELEASE:
 | |
|         if (req->cmd.buf[1] & 1) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case RELEASE_10:
 | |
|         if (req->cmd.buf[1] & 3) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case START_STOP:
 | |
|         if (scsi_disk_emulate_start_stop(r) < 0) {
 | |
|             return 0;
 | |
|         }
 | |
|         break;
 | |
|     case ALLOW_MEDIUM_REMOVAL:
 | |
|         s->tray_locked = req->cmd.buf[4] & 1;
 | |
|         blk_lock_medium(s->qdev.conf.blk, req->cmd.buf[4] & 1);
 | |
|         break;
 | |
|     case READ_CAPACITY_10:
 | |
|         /* The normal LEN field for this command is zero.  */
 | |
|         memset(outbuf, 0, 8);
 | |
|         blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
 | |
|         if (!nb_sectors) {
 | |
|             scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
 | |
|             return 0;
 | |
|         }
 | |
|         if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         nb_sectors /= s->qdev.blocksize / 512;
 | |
|         /* Returned value is the address of the last sector.  */
 | |
|         nb_sectors--;
 | |
|         /* Remember the new size for read/write sanity checking. */
 | |
|         s->qdev.max_lba = nb_sectors;
 | |
|         /* Clip to 2TB, instead of returning capacity modulo 2TB. */
 | |
|         if (nb_sectors > UINT32_MAX) {
 | |
|             nb_sectors = UINT32_MAX;
 | |
|         }
 | |
|         outbuf[0] = (nb_sectors >> 24) & 0xff;
 | |
|         outbuf[1] = (nb_sectors >> 16) & 0xff;
 | |
|         outbuf[2] = (nb_sectors >> 8) & 0xff;
 | |
|         outbuf[3] = nb_sectors & 0xff;
 | |
|         outbuf[4] = 0;
 | |
|         outbuf[5] = 0;
 | |
|         outbuf[6] = s->qdev.blocksize >> 8;
 | |
|         outbuf[7] = 0;
 | |
|         break;
 | |
|     case REQUEST_SENSE:
 | |
|         /* Just return "NO SENSE".  */
 | |
|         buflen = scsi_build_sense(NULL, 0, outbuf, r->buflen,
 | |
|                                   (req->cmd.buf[1] & 1) == 0);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case MECHANISM_STATUS:
 | |
|         buflen = scsi_emulate_mechanism_status(s, outbuf);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case GET_CONFIGURATION:
 | |
|         buflen = scsi_get_configuration(s, outbuf);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case GET_EVENT_STATUS_NOTIFICATION:
 | |
|         buflen = scsi_get_event_status_notification(s, r, outbuf);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case READ_DISC_INFORMATION:
 | |
|         buflen = scsi_read_disc_information(s, r, outbuf);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case READ_DVD_STRUCTURE:
 | |
|         buflen = scsi_read_dvd_structure(s, r, outbuf);
 | |
|         if (buflen < 0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case SERVICE_ACTION_IN_16:
 | |
|         /* Service Action In subcommands. */
 | |
|         if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
 | |
|             DPRINTF("SAI READ CAPACITY(16)\n");
 | |
|             memset(outbuf, 0, req->cmd.xfer);
 | |
|             blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
 | |
|             if (!nb_sectors) {
 | |
|                 scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
 | |
|                 return 0;
 | |
|             }
 | |
|             if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
 | |
|                 goto illegal_request;
 | |
|             }
 | |
|             nb_sectors /= s->qdev.blocksize / 512;
 | |
|             /* Returned value is the address of the last sector.  */
 | |
|             nb_sectors--;
 | |
|             /* Remember the new size for read/write sanity checking. */
 | |
|             s->qdev.max_lba = nb_sectors;
 | |
|             outbuf[0] = (nb_sectors >> 56) & 0xff;
 | |
|             outbuf[1] = (nb_sectors >> 48) & 0xff;
 | |
|             outbuf[2] = (nb_sectors >> 40) & 0xff;
 | |
|             outbuf[3] = (nb_sectors >> 32) & 0xff;
 | |
|             outbuf[4] = (nb_sectors >> 24) & 0xff;
 | |
|             outbuf[5] = (nb_sectors >> 16) & 0xff;
 | |
|             outbuf[6] = (nb_sectors >> 8) & 0xff;
 | |
|             outbuf[7] = nb_sectors & 0xff;
 | |
|             outbuf[8] = 0;
 | |
|             outbuf[9] = 0;
 | |
|             outbuf[10] = s->qdev.blocksize >> 8;
 | |
|             outbuf[11] = 0;
 | |
|             outbuf[12] = 0;
 | |
|             outbuf[13] = get_physical_block_exp(&s->qdev.conf);
 | |
| 
 | |
|             /* set TPE bit if the format supports discard */
 | |
|             if (s->qdev.conf.discard_granularity) {
 | |
|                 outbuf[14] = 0x80;
 | |
|             }
 | |
| 
 | |
|             /* Protection, exponent and lowest lba field left blank. */
 | |
|             break;
 | |
|         }
 | |
|         DPRINTF("Unsupported Service Action In\n");
 | |
|         goto illegal_request;
 | |
|     case SYNCHRONIZE_CACHE:
 | |
|         /* The request is used as the AIO opaque value, so add a ref.  */
 | |
|         scsi_req_ref(&r->req);
 | |
|         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0,
 | |
|                          BLOCK_ACCT_FLUSH);
 | |
|         r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r);
 | |
|         return 0;
 | |
|     case SEEK_10:
 | |
|         DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
 | |
|         if (r->req.cmd.lba > s->qdev.max_lba) {
 | |
|             goto illegal_lba;
 | |
|         }
 | |
|         break;
 | |
|     case MODE_SELECT:
 | |
|         DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
 | |
|         break;
 | |
|     case MODE_SELECT_10:
 | |
|         DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
 | |
|         break;
 | |
|     case UNMAP:
 | |
|         DPRINTF("Unmap (len %lu)\n", (long)r->req.cmd.xfer);
 | |
|         break;
 | |
|     case VERIFY_10:
 | |
|     case VERIFY_12:
 | |
|     case VERIFY_16:
 | |
|         DPRINTF("Verify (bytchk %d)\n", (req->cmd.buf[1] >> 1) & 3);
 | |
|         if (req->cmd.buf[1] & 6) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         break;
 | |
|     case WRITE_SAME_10:
 | |
|     case WRITE_SAME_16:
 | |
|         DPRINTF("WRITE SAME %d (len %lu)\n",
 | |
|                 req->cmd.buf[0] == WRITE_SAME_10 ? 10 : 16,
 | |
|                 (long)r->req.cmd.xfer);
 | |
|         break;
 | |
|     default:
 | |
|         DPRINTF("Unknown SCSI command (%2.2x=%s)\n", buf[0],
 | |
|                 scsi_command_name(buf[0]));
 | |
|         scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
 | |
|         return 0;
 | |
|     }
 | |
|     assert(!r->req.aiocb);
 | |
|     r->iov.iov_len = MIN(r->buflen, req->cmd.xfer);
 | |
|     if (r->iov.iov_len == 0) {
 | |
|         scsi_req_complete(&r->req, GOOD);
 | |
|     }
 | |
|     if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
 | |
|         assert(r->iov.iov_len == req->cmd.xfer);
 | |
|         return -r->iov.iov_len;
 | |
|     } else {
 | |
|         return r->iov.iov_len;
 | |
|     }
 | |
| 
 | |
| illegal_request:
 | |
|     if (r->req.status == -1) {
 | |
|         scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
|     }
 | |
|     return 0;
 | |
| 
 | |
| illegal_lba:
 | |
|     scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| /* Execute a scsi command.  Returns the length of the data expected by the
 | |
|    command.  This will be Positive for data transfers from the device
 | |
|    (eg. disk reads), negative for transfers to the device (eg. disk writes),
 | |
|    and zero if the command does not transfer any data.  */
 | |
| 
 | |
| static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf)
 | |
| {
 | |
|     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
 | |
|     uint32_t len;
 | |
|     uint8_t command;
 | |
| 
 | |
|     command = buf[0];
 | |
| 
 | |
|     if (s->tray_open || !blk_is_inserted(s->qdev.conf.blk)) {
 | |
|         scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
 | |
|         return 0;
 | |
|     }
 | |
| 
 | |
|     len = scsi_data_cdb_xfer(r->req.cmd.buf);
 | |
|     switch (command) {
 | |
|     case READ_6:
 | |
|     case READ_10:
 | |
|     case READ_12:
 | |
|     case READ_16:
 | |
|         DPRINTF("Read (sector %" PRId64 ", count %u)\n", r->req.cmd.lba, len);
 | |
|         if (r->req.cmd.buf[1] & 0xe0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         if (!check_lba_range(s, r->req.cmd.lba, len)) {
 | |
|             goto illegal_lba;
 | |
|         }
 | |
|         r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
 | |
|         r->sector_count = len * (s->qdev.blocksize / 512);
 | |
|         break;
 | |
|     case WRITE_6:
 | |
|     case WRITE_10:
 | |
|     case WRITE_12:
 | |
|     case WRITE_16:
 | |
|     case WRITE_VERIFY_10:
 | |
|     case WRITE_VERIFY_12:
 | |
|     case WRITE_VERIFY_16:
 | |
|         if (blk_is_read_only(s->qdev.conf.blk)) {
 | |
|             scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
 | |
|             return 0;
 | |
|         }
 | |
|         DPRINTF("Write %s(sector %" PRId64 ", count %u)\n",
 | |
|                 (command & 0xe) == 0xe ? "And Verify " : "",
 | |
|                 r->req.cmd.lba, len);
 | |
|         if (r->req.cmd.buf[1] & 0xe0) {
 | |
|             goto illegal_request;
 | |
|         }
 | |
|         if (!check_lba_range(s, r->req.cmd.lba, len)) {
 | |
|             goto illegal_lba;
 | |
|         }
 | |
|         r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
 | |
|         r->sector_count = len * (s->qdev.blocksize / 512);
 | |
|         break;
 | |
|     default:
 | |
|         abort();
 | |
|     illegal_request:
 | |
|         scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
 | |
|         return 0;
 | |
|     illegal_lba:
 | |
|         scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
 | |
|         return 0;
 | |
|     }
 | |
|     if (r->sector_count == 0) {
 | |
|         scsi_req_complete(&r->req, GOOD);
 | |
|     }
 | |
|     assert(r->iov.iov_len == 0);
 | |
|     if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
 | |
|         return -r->sector_count * 512;
 | |
|     } else {
 | |
|         return r->sector_count * 512;
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void scsi_disk_reset(DeviceState *dev)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
 | |
|     uint64_t nb_sectors;
 | |
| 
 | |
|     scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
 | |
| 
 | |
|     blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
 | |
|     nb_sectors /= s->qdev.blocksize / 512;
 | |
|     if (nb_sectors) {
 | |
|         nb_sectors--;
 | |
|     }
 | |
|     s->qdev.max_lba = nb_sectors;
 | |
|     /* reset tray statuses */
 | |
|     s->tray_locked = 0;
 | |
|     s->tray_open = 0;
 | |
| }
 | |
| 
 | |
| static void scsi_disk_resize_cb(void *opaque)
 | |
| {
 | |
|     SCSIDiskState *s = opaque;
 | |
| 
 | |
|     /* SPC lists this sense code as available only for
 | |
|      * direct-access devices.
 | |
|      */
 | |
|     if (s->qdev.type == TYPE_DISK) {
 | |
|         scsi_device_report_change(&s->qdev, SENSE_CODE(CAPACITY_CHANGED));
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void scsi_cd_change_media_cb(void *opaque, bool load)
 | |
| {
 | |
|     SCSIDiskState *s = opaque;
 | |
| 
 | |
|     /*
 | |
|      * When a CD gets changed, we have to report an ejected state and
 | |
|      * then a loaded state to guests so that they detect tray
 | |
|      * open/close and media change events.  Guests that do not use
 | |
|      * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
 | |
|      * states rely on this behavior.
 | |
|      *
 | |
|      * media_changed governs the state machine used for unit attention
 | |
|      * report.  media_event is used by GET EVENT STATUS NOTIFICATION.
 | |
|      */
 | |
|     s->media_changed = load;
 | |
|     s->tray_open = !load;
 | |
|     scsi_device_set_ua(&s->qdev, SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM));
 | |
|     s->media_event = true;
 | |
|     s->eject_request = false;
 | |
| }
 | |
| 
 | |
| static void scsi_cd_eject_request_cb(void *opaque, bool force)
 | |
| {
 | |
|     SCSIDiskState *s = opaque;
 | |
| 
 | |
|     s->eject_request = true;
 | |
|     if (force) {
 | |
|         s->tray_locked = false;
 | |
|     }
 | |
| }
 | |
| 
 | |
| static bool scsi_cd_is_tray_open(void *opaque)
 | |
| {
 | |
|     return ((SCSIDiskState *)opaque)->tray_open;
 | |
| }
 | |
| 
 | |
| static bool scsi_cd_is_medium_locked(void *opaque)
 | |
| {
 | |
|     return ((SCSIDiskState *)opaque)->tray_locked;
 | |
| }
 | |
| 
 | |
| static const BlockDevOps scsi_disk_removable_block_ops = {
 | |
|     .change_media_cb = scsi_cd_change_media_cb,
 | |
|     .eject_request_cb = scsi_cd_eject_request_cb,
 | |
|     .is_tray_open = scsi_cd_is_tray_open,
 | |
|     .is_medium_locked = scsi_cd_is_medium_locked,
 | |
| 
 | |
|     .resize_cb = scsi_disk_resize_cb,
 | |
| };
 | |
| 
 | |
| static const BlockDevOps scsi_disk_block_ops = {
 | |
|     .resize_cb = scsi_disk_resize_cb,
 | |
| };
 | |
| 
 | |
| static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
 | |
|     if (s->media_changed) {
 | |
|         s->media_changed = false;
 | |
|         scsi_device_set_ua(&s->qdev, SENSE_CODE(MEDIUM_CHANGED));
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void scsi_realize(SCSIDevice *dev, Error **errp)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
 | |
|     Error *err = NULL;
 | |
| 
 | |
|     if (!s->qdev.conf.blk) {
 | |
|         error_setg(errp, "drive property not set");
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     if (!(s->features & (1 << SCSI_DISK_F_REMOVABLE)) &&
 | |
|         !blk_is_inserted(s->qdev.conf.blk)) {
 | |
|         error_setg(errp, "Device needs media, but drive is empty");
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     blkconf_serial(&s->qdev.conf, &s->serial);
 | |
|     blkconf_blocksizes(&s->qdev.conf);
 | |
|     if (dev->type == TYPE_DISK) {
 | |
|         blkconf_geometry(&dev->conf, NULL, 65535, 255, 255, &err);
 | |
|         if (err) {
 | |
|             error_propagate(errp, err);
 | |
|             return;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     if (s->qdev.conf.discard_granularity == -1) {
 | |
|         s->qdev.conf.discard_granularity =
 | |
|             MAX(s->qdev.conf.logical_block_size, DEFAULT_DISCARD_GRANULARITY);
 | |
|     }
 | |
| 
 | |
|     if (!s->version) {
 | |
|         s->version = g_strdup(qemu_hw_version());
 | |
|     }
 | |
|     if (!s->vendor) {
 | |
|         s->vendor = g_strdup("QEMU");
 | |
|     }
 | |
| 
 | |
|     if (blk_is_sg(s->qdev.conf.blk)) {
 | |
|         error_setg(errp, "unwanted /dev/sg*");
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) &&
 | |
|             !(s->features & (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS))) {
 | |
|         blk_set_dev_ops(s->qdev.conf.blk, &scsi_disk_removable_block_ops, s);
 | |
|     } else {
 | |
|         blk_set_dev_ops(s->qdev.conf.blk, &scsi_disk_block_ops, s);
 | |
|     }
 | |
|     blk_set_guest_block_size(s->qdev.conf.blk, s->qdev.blocksize);
 | |
| 
 | |
|     blk_iostatus_enable(s->qdev.conf.blk);
 | |
| }
 | |
| 
 | |
| static void scsi_hd_realize(SCSIDevice *dev, Error **errp)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
 | |
|     /* can happen for devices without drive. The error message for missing
 | |
|      * backend will be issued in scsi_realize
 | |
|      */
 | |
|     if (s->qdev.conf.blk) {
 | |
|         blkconf_blocksizes(&s->qdev.conf);
 | |
|     }
 | |
|     s->qdev.blocksize = s->qdev.conf.logical_block_size;
 | |
|     s->qdev.type = TYPE_DISK;
 | |
|     if (!s->product) {
 | |
|         s->product = g_strdup("QEMU HARDDISK");
 | |
|     }
 | |
|     scsi_realize(&s->qdev, errp);
 | |
| }
 | |
| 
 | |
| static void scsi_cd_realize(SCSIDevice *dev, Error **errp)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
 | |
|     s->qdev.blocksize = 2048;
 | |
|     s->qdev.type = TYPE_ROM;
 | |
|     s->features |= 1 << SCSI_DISK_F_REMOVABLE;
 | |
|     if (!s->product) {
 | |
|         s->product = g_strdup("QEMU CD-ROM");
 | |
|     }
 | |
|     scsi_realize(&s->qdev, errp);
 | |
| }
 | |
| 
 | |
| static void scsi_disk_realize(SCSIDevice *dev, Error **errp)
 | |
| {
 | |
|     DriveInfo *dinfo;
 | |
|     Error *local_err = NULL;
 | |
| 
 | |
|     if (!dev->conf.blk) {
 | |
|         scsi_realize(dev, &local_err);
 | |
|         assert(local_err);
 | |
|         error_propagate(errp, local_err);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     dinfo = blk_legacy_dinfo(dev->conf.blk);
 | |
|     if (dinfo && dinfo->media_cd) {
 | |
|         scsi_cd_realize(dev, errp);
 | |
|     } else {
 | |
|         scsi_hd_realize(dev, errp);
 | |
|     }
 | |
| }
 | |
| 
 | |
| static const SCSIReqOps scsi_disk_emulate_reqops = {
 | |
|     .size         = sizeof(SCSIDiskReq),
 | |
|     .free_req     = scsi_free_request,
 | |
|     .send_command = scsi_disk_emulate_command,
 | |
|     .read_data    = scsi_disk_emulate_read_data,
 | |
|     .write_data   = scsi_disk_emulate_write_data,
 | |
|     .get_buf      = scsi_get_buf,
 | |
| };
 | |
| 
 | |
| static const SCSIReqOps scsi_disk_dma_reqops = {
 | |
|     .size         = sizeof(SCSIDiskReq),
 | |
|     .free_req     = scsi_free_request,
 | |
|     .send_command = scsi_disk_dma_command,
 | |
|     .read_data    = scsi_read_data,
 | |
|     .write_data   = scsi_write_data,
 | |
|     .get_buf      = scsi_get_buf,
 | |
|     .load_request = scsi_disk_load_request,
 | |
|     .save_request = scsi_disk_save_request,
 | |
| };
 | |
| 
 | |
| static const SCSIReqOps *const scsi_disk_reqops_dispatch[256] = {
 | |
|     [TEST_UNIT_READY]                 = &scsi_disk_emulate_reqops,
 | |
|     [INQUIRY]                         = &scsi_disk_emulate_reqops,
 | |
|     [MODE_SENSE]                      = &scsi_disk_emulate_reqops,
 | |
|     [MODE_SENSE_10]                   = &scsi_disk_emulate_reqops,
 | |
|     [START_STOP]                      = &scsi_disk_emulate_reqops,
 | |
|     [ALLOW_MEDIUM_REMOVAL]            = &scsi_disk_emulate_reqops,
 | |
|     [READ_CAPACITY_10]                = &scsi_disk_emulate_reqops,
 | |
|     [READ_TOC]                        = &scsi_disk_emulate_reqops,
 | |
|     [READ_DVD_STRUCTURE]              = &scsi_disk_emulate_reqops,
 | |
|     [READ_DISC_INFORMATION]           = &scsi_disk_emulate_reqops,
 | |
|     [GET_CONFIGURATION]               = &scsi_disk_emulate_reqops,
 | |
|     [GET_EVENT_STATUS_NOTIFICATION]   = &scsi_disk_emulate_reqops,
 | |
|     [MECHANISM_STATUS]                = &scsi_disk_emulate_reqops,
 | |
|     [SERVICE_ACTION_IN_16]            = &scsi_disk_emulate_reqops,
 | |
|     [REQUEST_SENSE]                   = &scsi_disk_emulate_reqops,
 | |
|     [SYNCHRONIZE_CACHE]               = &scsi_disk_emulate_reqops,
 | |
|     [SEEK_10]                         = &scsi_disk_emulate_reqops,
 | |
|     [MODE_SELECT]                     = &scsi_disk_emulate_reqops,
 | |
|     [MODE_SELECT_10]                  = &scsi_disk_emulate_reqops,
 | |
|     [UNMAP]                           = &scsi_disk_emulate_reqops,
 | |
|     [WRITE_SAME_10]                   = &scsi_disk_emulate_reqops,
 | |
|     [WRITE_SAME_16]                   = &scsi_disk_emulate_reqops,
 | |
|     [VERIFY_10]                       = &scsi_disk_emulate_reqops,
 | |
|     [VERIFY_12]                       = &scsi_disk_emulate_reqops,
 | |
|     [VERIFY_16]                       = &scsi_disk_emulate_reqops,
 | |
| 
 | |
|     [READ_6]                          = &scsi_disk_dma_reqops,
 | |
|     [READ_10]                         = &scsi_disk_dma_reqops,
 | |
|     [READ_12]                         = &scsi_disk_dma_reqops,
 | |
|     [READ_16]                         = &scsi_disk_dma_reqops,
 | |
|     [WRITE_6]                         = &scsi_disk_dma_reqops,
 | |
|     [WRITE_10]                        = &scsi_disk_dma_reqops,
 | |
|     [WRITE_12]                        = &scsi_disk_dma_reqops,
 | |
|     [WRITE_16]                        = &scsi_disk_dma_reqops,
 | |
|     [WRITE_VERIFY_10]                 = &scsi_disk_dma_reqops,
 | |
|     [WRITE_VERIFY_12]                 = &scsi_disk_dma_reqops,
 | |
|     [WRITE_VERIFY_16]                 = &scsi_disk_dma_reqops,
 | |
| };
 | |
| 
 | |
| static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
 | |
|                                      uint8_t *buf, void *hba_private)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
 | |
|     SCSIRequest *req;
 | |
|     const SCSIReqOps *ops;
 | |
|     uint8_t command;
 | |
| 
 | |
|     command = buf[0];
 | |
|     ops = scsi_disk_reqops_dispatch[command];
 | |
|     if (!ops) {
 | |
|         ops = &scsi_disk_emulate_reqops;
 | |
|     }
 | |
|     req = scsi_req_alloc(ops, &s->qdev, tag, lun, hba_private);
 | |
| 
 | |
| #ifdef DEBUG_SCSI
 | |
|     DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
 | |
|     {
 | |
|         int i;
 | |
|         for (i = 1; i < scsi_cdb_length(buf); i++) {
 | |
|             printf(" 0x%02x", buf[i]);
 | |
|         }
 | |
|         printf("\n");
 | |
|     }
 | |
| #endif
 | |
| 
 | |
|     return req;
 | |
| }
 | |
| 
 | |
| #ifdef __linux__
 | |
| static int get_device_type(SCSIDiskState *s)
 | |
| {
 | |
|     uint8_t cmd[16];
 | |
|     uint8_t buf[36];
 | |
|     uint8_t sensebuf[8];
 | |
|     sg_io_hdr_t io_header;
 | |
|     int ret;
 | |
| 
 | |
|     memset(cmd, 0, sizeof(cmd));
 | |
|     memset(buf, 0, sizeof(buf));
 | |
|     cmd[0] = INQUIRY;
 | |
|     cmd[4] = sizeof(buf);
 | |
| 
 | |
|     memset(&io_header, 0, sizeof(io_header));
 | |
|     io_header.interface_id = 'S';
 | |
|     io_header.dxfer_direction = SG_DXFER_FROM_DEV;
 | |
|     io_header.dxfer_len = sizeof(buf);
 | |
|     io_header.dxferp = buf;
 | |
|     io_header.cmdp = cmd;
 | |
|     io_header.cmd_len = sizeof(cmd);
 | |
|     io_header.mx_sb_len = sizeof(sensebuf);
 | |
|     io_header.sbp = sensebuf;
 | |
|     io_header.timeout = 6000; /* XXX */
 | |
| 
 | |
|     ret = blk_ioctl(s->qdev.conf.blk, SG_IO, &io_header);
 | |
|     if (ret < 0 || io_header.driver_status || io_header.host_status) {
 | |
|         return -1;
 | |
|     }
 | |
|     s->qdev.type = buf[0];
 | |
|     if (buf[1] & 0x80) {
 | |
|         s->features |= 1 << SCSI_DISK_F_REMOVABLE;
 | |
|     }
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| static void scsi_block_realize(SCSIDevice *dev, Error **errp)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
 | |
|     int sg_version;
 | |
|     int rc;
 | |
| 
 | |
|     if (!s->qdev.conf.blk) {
 | |
|         error_setg(errp, "drive property not set");
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     /* check we are using a driver managing SG_IO (version 3 and after) */
 | |
|     rc = blk_ioctl(s->qdev.conf.blk, SG_GET_VERSION_NUM, &sg_version);
 | |
|     if (rc < 0) {
 | |
|         error_setg(errp, "cannot get SG_IO version number: %s.  "
 | |
|                      "Is this a SCSI device?",
 | |
|                      strerror(-rc));
 | |
|         return;
 | |
|     }
 | |
|     if (sg_version < 30000) {
 | |
|         error_setg(errp, "scsi generic interface too old");
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     /* get device type from INQUIRY data */
 | |
|     rc = get_device_type(s);
 | |
|     if (rc < 0) {
 | |
|         error_setg(errp, "INQUIRY failed");
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     /* Make a guess for the block size, we'll fix it when the guest sends.
 | |
|      * READ CAPACITY.  If they don't, they likely would assume these sizes
 | |
|      * anyway. (TODO: check in /sys).
 | |
|      */
 | |
|     if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) {
 | |
|         s->qdev.blocksize = 2048;
 | |
|     } else {
 | |
|         s->qdev.blocksize = 512;
 | |
|     }
 | |
| 
 | |
|     /* Makes the scsi-block device not removable by using HMP and QMP eject
 | |
|      * command.
 | |
|      */
 | |
|     s->features |= (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS);
 | |
| 
 | |
|     scsi_realize(&s->qdev, errp);
 | |
|     scsi_generic_read_device_identification(&s->qdev);
 | |
| }
 | |
| 
 | |
| static bool scsi_block_is_passthrough(SCSIDiskState *s, uint8_t *buf)
 | |
| {
 | |
|     switch (buf[0]) {
 | |
|     case READ_6:
 | |
|     case READ_10:
 | |
|     case READ_12:
 | |
|     case READ_16:
 | |
|     case VERIFY_10:
 | |
|     case VERIFY_12:
 | |
|     case VERIFY_16:
 | |
|     case WRITE_6:
 | |
|     case WRITE_10:
 | |
|     case WRITE_12:
 | |
|     case WRITE_16:
 | |
|     case WRITE_VERIFY_10:
 | |
|     case WRITE_VERIFY_12:
 | |
|     case WRITE_VERIFY_16:
 | |
|         /* If we are not using O_DIRECT, we might read stale data from the
 | |
|          * host cache if writes were made using other commands than these
 | |
|          * ones (such as WRITE SAME or EXTENDED COPY, etc.).  So, without
 | |
|          * O_DIRECT everything must go through SG_IO.
 | |
|          */
 | |
|         if (!(blk_get_flags(s->qdev.conf.blk) & BDRV_O_NOCACHE)) {
 | |
|             break;
 | |
|         }
 | |
| 
 | |
|         /* MMC writing cannot be done via pread/pwrite, because it sometimes
 | |
|          * involves writing beyond the maximum LBA or to negative LBA (lead-in).
 | |
|          * And once you do these writes, reading from the block device is
 | |
|          * unreliable, too.  It is even possible that reads deliver random data
 | |
|          * from the host page cache (this is probably a Linux bug).
 | |
|          *
 | |
|          * We might use scsi_disk_dma_reqops as long as no writing commands are
 | |
|          * seen, but performance usually isn't paramount on optical media.  So,
 | |
|          * just make scsi-block operate the same as scsi-generic for them.
 | |
|          */
 | |
|         if (s->qdev.type != TYPE_ROM) {
 | |
|             return false;
 | |
|         }
 | |
|         break;
 | |
| 
 | |
|     default:
 | |
|         break;
 | |
|     }
 | |
| 
 | |
|     return true;
 | |
| }
 | |
| 
 | |
| 
 | |
| static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
 | |
|                                            uint32_t lun, uint8_t *buf,
 | |
|                                            void *hba_private)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
 | |
| 
 | |
|     if (scsi_block_is_passthrough(s, buf)) {
 | |
|         return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
 | |
|                               hba_private);
 | |
|     } else {
 | |
|         return scsi_req_alloc(&scsi_disk_dma_reqops, &s->qdev, tag, lun,
 | |
|                               hba_private);
 | |
|     }
 | |
| }
 | |
| 
 | |
| static int scsi_block_parse_cdb(SCSIDevice *d, SCSICommand *cmd,
 | |
|                                   uint8_t *buf, void *hba_private)
 | |
| {
 | |
|     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
 | |
| 
 | |
|     if (scsi_block_is_passthrough(s, buf)) {
 | |
|         return scsi_bus_parse_cdb(&s->qdev, cmd, buf, hba_private);
 | |
|     } else {
 | |
|         return scsi_req_parse_cdb(&s->qdev, cmd, buf);
 | |
|     }
 | |
| }
 | |
| 
 | |
| #endif
 | |
| 
 | |
| #define DEFINE_SCSI_DISK_PROPERTIES()                                \
 | |
|     DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),               \
 | |
|     DEFINE_PROP_STRING("ver", SCSIDiskState, version),               \
 | |
|     DEFINE_PROP_STRING("serial", SCSIDiskState, serial),             \
 | |
|     DEFINE_PROP_STRING("vendor", SCSIDiskState, vendor),             \
 | |
|     DEFINE_PROP_STRING("product", SCSIDiskState, product)
 | |
| 
 | |
| static Property scsi_hd_properties[] = {
 | |
|     DEFINE_SCSI_DISK_PROPERTIES(),
 | |
|     DEFINE_PROP_BIT("removable", SCSIDiskState, features,
 | |
|                     SCSI_DISK_F_REMOVABLE, false),
 | |
|     DEFINE_PROP_BIT("dpofua", SCSIDiskState, features,
 | |
|                     SCSI_DISK_F_DPOFUA, false),
 | |
|     DEFINE_PROP_UINT64("wwn", SCSIDiskState, qdev.wwn, 0),
 | |
|     DEFINE_PROP_UINT64("port_wwn", SCSIDiskState, qdev.port_wwn, 0),
 | |
|     DEFINE_PROP_UINT16("port_index", SCSIDiskState, port_index, 0),
 | |
|     DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size,
 | |
|                        DEFAULT_MAX_UNMAP_SIZE),
 | |
|     DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size,
 | |
|                        DEFAULT_MAX_IO_SIZE),
 | |
|     DEFINE_BLOCK_CHS_PROPERTIES(SCSIDiskState, qdev.conf),
 | |
|     DEFINE_PROP_END_OF_LIST(),
 | |
| };
 | |
| 
 | |
| static const VMStateDescription vmstate_scsi_disk_state = {
 | |
|     .name = "scsi-disk",
 | |
|     .version_id = 1,
 | |
|     .minimum_version_id = 1,
 | |
|     .fields = (VMStateField[]) {
 | |
|         VMSTATE_SCSI_DEVICE(qdev, SCSIDiskState),
 | |
|         VMSTATE_BOOL(media_changed, SCSIDiskState),
 | |
|         VMSTATE_BOOL(media_event, SCSIDiskState),
 | |
|         VMSTATE_BOOL(eject_request, SCSIDiskState),
 | |
|         VMSTATE_BOOL(tray_open, SCSIDiskState),
 | |
|         VMSTATE_BOOL(tray_locked, SCSIDiskState),
 | |
|         VMSTATE_END_OF_LIST()
 | |
|     }
 | |
| };
 | |
| 
 | |
| static void scsi_hd_class_initfn(ObjectClass *klass, void *data)
 | |
| {
 | |
|     DeviceClass *dc = DEVICE_CLASS(klass);
 | |
|     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 | |
| 
 | |
|     sc->realize      = scsi_hd_realize;
 | |
|     sc->alloc_req    = scsi_new_request;
 | |
|     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
 | |
|     dc->fw_name = "disk";
 | |
|     dc->desc = "virtual SCSI disk";
 | |
|     dc->reset = scsi_disk_reset;
 | |
|     dc->props = scsi_hd_properties;
 | |
|     dc->vmsd  = &vmstate_scsi_disk_state;
 | |
| }
 | |
| 
 | |
| static const TypeInfo scsi_hd_info = {
 | |
|     .name          = "scsi-hd",
 | |
|     .parent        = TYPE_SCSI_DEVICE,
 | |
|     .instance_size = sizeof(SCSIDiskState),
 | |
|     .class_init    = scsi_hd_class_initfn,
 | |
| };
 | |
| 
 | |
| static Property scsi_cd_properties[] = {
 | |
|     DEFINE_SCSI_DISK_PROPERTIES(),
 | |
|     DEFINE_PROP_UINT64("wwn", SCSIDiskState, qdev.wwn, 0),
 | |
|     DEFINE_PROP_UINT64("port_wwn", SCSIDiskState, qdev.port_wwn, 0),
 | |
|     DEFINE_PROP_UINT16("port_index", SCSIDiskState, port_index, 0),
 | |
|     DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size,
 | |
|                        DEFAULT_MAX_IO_SIZE),
 | |
|     DEFINE_PROP_END_OF_LIST(),
 | |
| };
 | |
| 
 | |
| static void scsi_cd_class_initfn(ObjectClass *klass, void *data)
 | |
| {
 | |
|     DeviceClass *dc = DEVICE_CLASS(klass);
 | |
|     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 | |
| 
 | |
|     sc->realize      = scsi_cd_realize;
 | |
|     sc->alloc_req    = scsi_new_request;
 | |
|     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
 | |
|     dc->fw_name = "disk";
 | |
|     dc->desc = "virtual SCSI CD-ROM";
 | |
|     dc->reset = scsi_disk_reset;
 | |
|     dc->props = scsi_cd_properties;
 | |
|     dc->vmsd  = &vmstate_scsi_disk_state;
 | |
| }
 | |
| 
 | |
| static const TypeInfo scsi_cd_info = {
 | |
|     .name          = "scsi-cd",
 | |
|     .parent        = TYPE_SCSI_DEVICE,
 | |
|     .instance_size = sizeof(SCSIDiskState),
 | |
|     .class_init    = scsi_cd_class_initfn,
 | |
| };
 | |
| 
 | |
| #ifdef __linux__
 | |
| static Property scsi_block_properties[] = {
 | |
|     DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.blk),
 | |
|     DEFINE_PROP_END_OF_LIST(),
 | |
| };
 | |
| 
 | |
| static void scsi_block_class_initfn(ObjectClass *klass, void *data)
 | |
| {
 | |
|     DeviceClass *dc = DEVICE_CLASS(klass);
 | |
|     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 | |
| 
 | |
|     sc->realize      = scsi_block_realize;
 | |
|     sc->alloc_req    = scsi_block_new_request;
 | |
|     sc->parse_cdb    = scsi_block_parse_cdb;
 | |
|     dc->fw_name = "disk";
 | |
|     dc->desc = "SCSI block device passthrough";
 | |
|     dc->reset = scsi_disk_reset;
 | |
|     dc->props = scsi_block_properties;
 | |
|     dc->vmsd  = &vmstate_scsi_disk_state;
 | |
| }
 | |
| 
 | |
| static const TypeInfo scsi_block_info = {
 | |
|     .name          = "scsi-block",
 | |
|     .parent        = TYPE_SCSI_DEVICE,
 | |
|     .instance_size = sizeof(SCSIDiskState),
 | |
|     .class_init    = scsi_block_class_initfn,
 | |
| };
 | |
| #endif
 | |
| 
 | |
| static Property scsi_disk_properties[] = {
 | |
|     DEFINE_SCSI_DISK_PROPERTIES(),
 | |
|     DEFINE_PROP_BIT("removable", SCSIDiskState, features,
 | |
|                     SCSI_DISK_F_REMOVABLE, false),
 | |
|     DEFINE_PROP_BIT("dpofua", SCSIDiskState, features,
 | |
|                     SCSI_DISK_F_DPOFUA, false),
 | |
|     DEFINE_PROP_UINT64("wwn", SCSIDiskState, qdev.wwn, 0),
 | |
|     DEFINE_PROP_UINT64("port_wwn", SCSIDiskState, qdev.port_wwn, 0),
 | |
|     DEFINE_PROP_UINT16("port_index", SCSIDiskState, port_index, 0),
 | |
|     DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size,
 | |
|                        DEFAULT_MAX_UNMAP_SIZE),
 | |
|     DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size,
 | |
|                        DEFAULT_MAX_IO_SIZE),
 | |
|     DEFINE_PROP_END_OF_LIST(),
 | |
| };
 | |
| 
 | |
| static void scsi_disk_class_initfn(ObjectClass *klass, void *data)
 | |
| {
 | |
|     DeviceClass *dc = DEVICE_CLASS(klass);
 | |
|     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 | |
| 
 | |
|     sc->realize      = scsi_disk_realize;
 | |
|     sc->alloc_req    = scsi_new_request;
 | |
|     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
 | |
|     dc->fw_name = "disk";
 | |
|     dc->desc = "virtual SCSI disk or CD-ROM (legacy)";
 | |
|     dc->reset = scsi_disk_reset;
 | |
|     dc->props = scsi_disk_properties;
 | |
|     dc->vmsd  = &vmstate_scsi_disk_state;
 | |
| }
 | |
| 
 | |
| static const TypeInfo scsi_disk_info = {
 | |
|     .name          = "scsi-disk",
 | |
|     .parent        = TYPE_SCSI_DEVICE,
 | |
|     .instance_size = sizeof(SCSIDiskState),
 | |
|     .class_init    = scsi_disk_class_initfn,
 | |
| };
 | |
| 
 | |
| static void scsi_disk_register_types(void)
 | |
| {
 | |
|     type_register_static(&scsi_hd_info);
 | |
|     type_register_static(&scsi_cd_info);
 | |
| #ifdef __linux__
 | |
|     type_register_static(&scsi_block_info);
 | |
| #endif
 | |
|     type_register_static(&scsi_disk_info);
 | |
| }
 | |
| 
 | |
| type_init(scsi_disk_register_types)
 |