714 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			714 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * WM8750 audio CODEC.
 | |
|  *
 | |
|  * Copyright (c) 2006 Openedhand Ltd.
 | |
|  * Written by Andrzej Zaborowski <balrog@zabor.org>
 | |
|  *
 | |
|  * This file is licensed under GNU GPL.
 | |
|  */
 | |
| 
 | |
| #include "hw.h"
 | |
| #include "i2c.h"
 | |
| #include "audio/audio.h"
 | |
| 
 | |
| #define IN_PORT_N	3
 | |
| #define OUT_PORT_N	3
 | |
| 
 | |
| #define CODEC		"wm8750"
 | |
| 
 | |
| typedef struct {
 | |
|     int adc;
 | |
|     int adc_hz;
 | |
|     int dac;
 | |
|     int dac_hz;
 | |
| } WMRate;
 | |
| 
 | |
| typedef struct {
 | |
|     i2c_slave i2c;
 | |
|     uint8_t i2c_data[2];
 | |
|     int i2c_len;
 | |
|     QEMUSoundCard card;
 | |
|     SWVoiceIn *adc_voice[IN_PORT_N];
 | |
|     SWVoiceOut *dac_voice[OUT_PORT_N];
 | |
|     int enable;
 | |
|     void (*data_req)(void *, int, int);
 | |
|     void *opaque;
 | |
|     uint8_t data_in[4096];
 | |
|     uint8_t data_out[4096];
 | |
|     int idx_in, req_in;
 | |
|     int idx_out, req_out;
 | |
| 
 | |
|     SWVoiceOut **out[2];
 | |
|     uint8_t outvol[7], outmute[2];
 | |
|     SWVoiceIn **in[2];
 | |
|     uint8_t invol[4], inmute[2];
 | |
| 
 | |
|     uint8_t diff[2], pol, ds, monomix[2], alc, mute;
 | |
|     uint8_t path[4], mpath[2], power, format;
 | |
|     const WMRate *rate;
 | |
|     uint8_t rate_vmstate;
 | |
|     int adc_hz, dac_hz, ext_adc_hz, ext_dac_hz, master;
 | |
| } WM8750State;
 | |
| 
 | |
| /* pow(10.0, -i / 20.0) * 255, i = 0..42 */
 | |
| static const uint8_t wm8750_vol_db_table[] = {
 | |
|     255, 227, 203, 181, 161, 143, 128, 114, 102, 90, 81, 72, 64, 57, 51, 45,
 | |
|     40, 36, 32, 29, 26, 23, 20, 18, 16, 14, 13, 11, 10, 9, 8, 7, 6, 6, 5, 5,
 | |
|     4, 4, 3, 3, 3, 2, 2
 | |
| };
 | |
| 
 | |
| #define WM8750_OUTVOL_TRANSFORM(x)	wm8750_vol_db_table[(0x7f - x) / 3]
 | |
| #define WM8750_INVOL_TRANSFORM(x)	(x << 2)
 | |
| 
 | |
| static inline void wm8750_in_load(WM8750State *s)
 | |
| {
 | |
|     int acquired;
 | |
|     if (s->idx_in + s->req_in <= sizeof(s->data_in))
 | |
|         return;
 | |
|     s->idx_in = audio_MAX(0, (int) sizeof(s->data_in) - s->req_in);
 | |
|     acquired = AUD_read(*s->in[0], s->data_in + s->idx_in,
 | |
|                     sizeof(s->data_in) - s->idx_in);
 | |
| }
 | |
| 
 | |
| static inline void wm8750_out_flush(WM8750State *s)
 | |
| {
 | |
|     int sent = 0;
 | |
|     while (sent < s->idx_out)
 | |
|         sent += AUD_write(*s->out[0], s->data_out + sent, s->idx_out - sent)
 | |
|                 ?: s->idx_out;
 | |
|     s->idx_out = 0;
 | |
| }
 | |
| 
 | |
| static void wm8750_audio_in_cb(void *opaque, int avail_b)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) opaque;
 | |
|     s->req_in = avail_b;
 | |
|     s->data_req(s->opaque, s->req_out >> 2, avail_b >> 2);
 | |
| }
 | |
| 
 | |
| static void wm8750_audio_out_cb(void *opaque, int free_b)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) opaque;
 | |
| 
 | |
|     if (s->idx_out >= free_b) {
 | |
|         s->idx_out = free_b;
 | |
|         s->req_out = 0;
 | |
|         wm8750_out_flush(s);
 | |
|     } else
 | |
|         s->req_out = free_b - s->idx_out;
 | |
|  
 | |
|     s->data_req(s->opaque, s->req_out >> 2, s->req_in >> 2);
 | |
| }
 | |
| 
 | |
| static const WMRate wm_rate_table[] = {
 | |
|     {  256, 48000,  256, 48000 },	/* SR: 00000 */
 | |
|     {  384, 48000,  384, 48000 },	/* SR: 00001 */
 | |
|     {  256, 48000, 1536,  8000 },	/* SR: 00010 */
 | |
|     {  384, 48000, 2304,  8000 },	/* SR: 00011 */
 | |
|     { 1536,  8000,  256, 48000 },	/* SR: 00100 */
 | |
|     { 2304,  8000,  384, 48000 },	/* SR: 00101 */
 | |
|     { 1536,  8000, 1536,  8000 },	/* SR: 00110 */
 | |
|     { 2304,  8000, 2304,  8000 },	/* SR: 00111 */
 | |
|     { 1024, 12000, 1024, 12000 },	/* SR: 01000 */
 | |
|     { 1526, 12000, 1536, 12000 },	/* SR: 01001 */
 | |
|     {  768, 16000,  768, 16000 },	/* SR: 01010 */
 | |
|     { 1152, 16000, 1152, 16000 },	/* SR: 01011 */
 | |
|     {  384, 32000,  384, 32000 },	/* SR: 01100 */
 | |
|     {  576, 32000,  576, 32000 },	/* SR: 01101 */
 | |
|     {  128, 96000,  128, 96000 },	/* SR: 01110 */
 | |
|     {  192, 96000,  192, 96000 },	/* SR: 01111 */
 | |
|     {  256, 44100,  256, 44100 },	/* SR: 10000 */
 | |
|     {  384, 44100,  384, 44100 },	/* SR: 10001 */
 | |
|     {  256, 44100, 1408,  8018 },	/* SR: 10010 */
 | |
|     {  384, 44100, 2112,  8018 },	/* SR: 10011 */
 | |
|     { 1408,  8018,  256, 44100 },	/* SR: 10100 */
 | |
|     { 2112,  8018,  384, 44100 },	/* SR: 10101 */
 | |
|     { 1408,  8018, 1408,  8018 },	/* SR: 10110 */
 | |
|     { 2112,  8018, 2112,  8018 },	/* SR: 10111 */
 | |
|     { 1024, 11025, 1024, 11025 },	/* SR: 11000 */
 | |
|     { 1536, 11025, 1536, 11025 },	/* SR: 11001 */
 | |
|     {  512, 22050,  512, 22050 },	/* SR: 11010 */
 | |
|     {  768, 22050,  768, 22050 },	/* SR: 11011 */
 | |
|     {  512, 24000,  512, 24000 },	/* SR: 11100 */
 | |
|     {  768, 24000,  768, 24000 },	/* SR: 11101 */
 | |
|     {  128, 88200,  128, 88200 },	/* SR: 11110 */
 | |
|     {  192, 88200,  192, 88200 },	/* SR: 11111 */
 | |
| };
 | |
| 
 | |
| static void wm8750_vol_update(WM8750State *s)
 | |
| {
 | |
|     /* FIXME: multiply all volumes by s->invol[2], s->invol[3] */
 | |
| 
 | |
|     AUD_set_volume_in(s->adc_voice[0], s->mute,
 | |
|                     s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]),
 | |
|                     s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1]));
 | |
|     AUD_set_volume_in(s->adc_voice[1], s->mute,
 | |
|                     s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]),
 | |
|                     s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1]));
 | |
|     AUD_set_volume_in(s->adc_voice[2], s->mute,
 | |
|                     s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]),
 | |
|                     s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1]));
 | |
| 
 | |
|     /* FIXME: multiply all volumes by s->outvol[0], s->outvol[1] */
 | |
| 
 | |
|     /* Speaker: LOUT2VOL ROUT2VOL */
 | |
|     AUD_set_volume_out(s->dac_voice[0], s->mute,
 | |
|                     s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[4]),
 | |
|                     s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[5]));
 | |
| 
 | |
|     /* Headphone: LOUT1VOL ROUT1VOL */
 | |
|     AUD_set_volume_out(s->dac_voice[1], s->mute,
 | |
|                     s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[2]),
 | |
|                     s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[3]));
 | |
| 
 | |
|     /* MONOOUT: MONOVOL MONOVOL */
 | |
|     AUD_set_volume_out(s->dac_voice[2], s->mute,
 | |
|                     s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[6]),
 | |
|                     s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[6]));
 | |
| }
 | |
| 
 | |
| static void wm8750_set_format(WM8750State *s)
 | |
| {
 | |
|     int i;
 | |
|     struct audsettings in_fmt;
 | |
|     struct audsettings out_fmt;
 | |
|     struct audsettings monoout_fmt;
 | |
| 
 | |
|     wm8750_out_flush(s);
 | |
| 
 | |
|     if (s->in[0] && *s->in[0])
 | |
|         AUD_set_active_in(*s->in[0], 0);
 | |
|     if (s->out[0] && *s->out[0])
 | |
|         AUD_set_active_out(*s->out[0], 0);
 | |
| 
 | |
|     for (i = 0; i < IN_PORT_N; i ++)
 | |
|         if (s->adc_voice[i]) {
 | |
|             AUD_close_in(&s->card, s->adc_voice[i]);
 | |
|             s->adc_voice[i] = NULL;
 | |
|         }
 | |
|     for (i = 0; i < OUT_PORT_N; i ++)
 | |
|         if (s->dac_voice[i]) {
 | |
|             AUD_close_out(&s->card, s->dac_voice[i]);
 | |
|             s->dac_voice[i] = NULL;
 | |
|         }
 | |
| 
 | |
|     if (!s->enable)
 | |
|         return;
 | |
| 
 | |
|     /* Setup input */
 | |
|     in_fmt.endianness = 0;
 | |
|     in_fmt.nchannels = 2;
 | |
|     in_fmt.freq = s->adc_hz;
 | |
|     in_fmt.fmt = AUD_FMT_S16;
 | |
| 
 | |
|     s->adc_voice[0] = AUD_open_in(&s->card, s->adc_voice[0],
 | |
|                     CODEC ".input1", s, wm8750_audio_in_cb, &in_fmt);
 | |
|     s->adc_voice[1] = AUD_open_in(&s->card, s->adc_voice[1],
 | |
|                     CODEC ".input2", s, wm8750_audio_in_cb, &in_fmt);
 | |
|     s->adc_voice[2] = AUD_open_in(&s->card, s->adc_voice[2],
 | |
|                     CODEC ".input3", s, wm8750_audio_in_cb, &in_fmt);
 | |
| 
 | |
|     /* Setup output */
 | |
|     out_fmt.endianness = 0;
 | |
|     out_fmt.nchannels = 2;
 | |
|     out_fmt.freq = s->dac_hz;
 | |
|     out_fmt.fmt = AUD_FMT_S16;
 | |
|     monoout_fmt.endianness = 0;
 | |
|     monoout_fmt.nchannels = 1;
 | |
|     monoout_fmt.freq = s->rate->dac_hz;
 | |
|     monoout_fmt.fmt = AUD_FMT_S16;
 | |
| 
 | |
|     s->dac_voice[0] = AUD_open_out(&s->card, s->dac_voice[0],
 | |
|                     CODEC ".speaker", s, wm8750_audio_out_cb, &out_fmt);
 | |
|     s->dac_voice[1] = AUD_open_out(&s->card, s->dac_voice[1],
 | |
|                     CODEC ".headphone", s, wm8750_audio_out_cb, &out_fmt);
 | |
|     /* MONOMIX is also in stereo for simplicity */
 | |
|     s->dac_voice[2] = AUD_open_out(&s->card, s->dac_voice[2],
 | |
|                     CODEC ".monomix", s, wm8750_audio_out_cb, &out_fmt);
 | |
|     /* no sense emulating OUT3 which is a mix of other outputs */
 | |
| 
 | |
|     wm8750_vol_update(s);
 | |
| 
 | |
|     /* We should connect the left and right channels to their
 | |
|      * respective inputs/outputs but we have completely no need
 | |
|      * for mixing or combining paths to different ports, so we
 | |
|      * connect both channels to where the left channel is routed.  */
 | |
|     if (s->in[0] && *s->in[0])
 | |
|         AUD_set_active_in(*s->in[0], 1);
 | |
|     if (s->out[0] && *s->out[0])
 | |
|         AUD_set_active_out(*s->out[0], 1);
 | |
| }
 | |
| 
 | |
| static void wm8750_clk_update(WM8750State *s, int ext)
 | |
| {
 | |
|     if (s->master || !s->ext_dac_hz)
 | |
|         s->dac_hz = s->rate->dac_hz;
 | |
|     else
 | |
|         s->dac_hz = s->ext_dac_hz;
 | |
| 
 | |
|     if (s->master || !s->ext_adc_hz)
 | |
|         s->adc_hz = s->rate->adc_hz;
 | |
|     else
 | |
|         s->adc_hz = s->ext_adc_hz;
 | |
| 
 | |
|     if (s->master || (!s->ext_dac_hz && !s->ext_adc_hz)) {
 | |
|         if (!ext)
 | |
|             wm8750_set_format(s);
 | |
|     } else {
 | |
|         if (ext)
 | |
|             wm8750_set_format(s);
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void wm8750_reset(i2c_slave *i2c)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) i2c;
 | |
|     s->rate = &wm_rate_table[0];
 | |
|     s->enable = 0;
 | |
|     wm8750_clk_update(s, 1);
 | |
|     s->diff[0] = 0;
 | |
|     s->diff[1] = 0;
 | |
|     s->ds = 0;
 | |
|     s->alc = 0;
 | |
|     s->in[0] = &s->adc_voice[0];
 | |
|     s->invol[0] = 0x17;
 | |
|     s->invol[1] = 0x17;
 | |
|     s->invol[2] = 0xc3;
 | |
|     s->invol[3] = 0xc3;
 | |
|     s->out[0] = &s->dac_voice[0];
 | |
|     s->outvol[0] = 0xff;
 | |
|     s->outvol[1] = 0xff;
 | |
|     s->outvol[2] = 0x79;
 | |
|     s->outvol[3] = 0x79;
 | |
|     s->outvol[4] = 0x79;
 | |
|     s->outvol[5] = 0x79;
 | |
|     s->outvol[6] = 0x79;
 | |
|     s->inmute[0] = 0;
 | |
|     s->inmute[1] = 0;
 | |
|     s->outmute[0] = 0;
 | |
|     s->outmute[1] = 0;
 | |
|     s->mute = 1;
 | |
|     s->path[0] = 0;
 | |
|     s->path[1] = 0;
 | |
|     s->path[2] = 0;
 | |
|     s->path[3] = 0;
 | |
|     s->mpath[0] = 0;
 | |
|     s->mpath[1] = 0;
 | |
|     s->format = 0x0a;
 | |
|     s->idx_in = sizeof(s->data_in);
 | |
|     s->req_in = 0;
 | |
|     s->idx_out = 0;
 | |
|     s->req_out = 0;
 | |
|     wm8750_vol_update(s);
 | |
|     s->i2c_len = 0;
 | |
| }
 | |
| 
 | |
| static void wm8750_event(i2c_slave *i2c, enum i2c_event event)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) i2c;
 | |
| 
 | |
|     switch (event) {
 | |
|     case I2C_START_SEND:
 | |
|         s->i2c_len = 0;
 | |
|         break;
 | |
|     case I2C_FINISH:
 | |
| #ifdef VERBOSE
 | |
|         if (s->i2c_len < 2)
 | |
|             printf("%s: message too short (%i bytes)\n",
 | |
|                             __FUNCTION__, s->i2c_len);
 | |
| #endif
 | |
|         break;
 | |
|     default:
 | |
|         break;
 | |
|     }
 | |
| }
 | |
| 
 | |
| #define WM8750_LINVOL	0x00
 | |
| #define WM8750_RINVOL	0x01
 | |
| #define WM8750_LOUT1V	0x02
 | |
| #define WM8750_ROUT1V	0x03
 | |
| #define WM8750_ADCDAC	0x05
 | |
| #define WM8750_IFACE	0x07
 | |
| #define WM8750_SRATE	0x08
 | |
| #define WM8750_LDAC	0x0a
 | |
| #define WM8750_RDAC	0x0b
 | |
| #define WM8750_BASS	0x0c
 | |
| #define WM8750_TREBLE	0x0d
 | |
| #define WM8750_RESET	0x0f
 | |
| #define WM8750_3D	0x10
 | |
| #define WM8750_ALC1	0x11
 | |
| #define WM8750_ALC2	0x12
 | |
| #define WM8750_ALC3	0x13
 | |
| #define WM8750_NGATE	0x14
 | |
| #define WM8750_LADC	0x15
 | |
| #define WM8750_RADC	0x16
 | |
| #define WM8750_ADCTL1	0x17
 | |
| #define WM8750_ADCTL2	0x18
 | |
| #define WM8750_PWR1	0x19
 | |
| #define WM8750_PWR2	0x1a
 | |
| #define WM8750_ADCTL3	0x1b
 | |
| #define WM8750_ADCIN	0x1f
 | |
| #define WM8750_LADCIN	0x20
 | |
| #define WM8750_RADCIN	0x21
 | |
| #define WM8750_LOUTM1	0x22
 | |
| #define WM8750_LOUTM2	0x23
 | |
| #define WM8750_ROUTM1	0x24
 | |
| #define WM8750_ROUTM2	0x25
 | |
| #define WM8750_MOUTM1	0x26
 | |
| #define WM8750_MOUTM2	0x27
 | |
| #define WM8750_LOUT2V	0x28
 | |
| #define WM8750_ROUT2V	0x29
 | |
| #define WM8750_MOUTV	0x2a
 | |
| 
 | |
| static int wm8750_tx(i2c_slave *i2c, uint8_t data)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) i2c;
 | |
|     uint8_t cmd;
 | |
|     uint16_t value;
 | |
| 
 | |
|     if (s->i2c_len >= 2) {
 | |
|         printf("%s: long message (%i bytes)\n", __FUNCTION__, s->i2c_len);
 | |
| #ifdef VERBOSE
 | |
|         return 1;
 | |
| #endif
 | |
|     }
 | |
|     s->i2c_data[s->i2c_len ++] = data;
 | |
|     if (s->i2c_len != 2)
 | |
|         return 0;
 | |
| 
 | |
|     cmd = s->i2c_data[0] >> 1;
 | |
|     value = ((s->i2c_data[0] << 8) | s->i2c_data[1]) & 0x1ff;
 | |
| 
 | |
|     switch (cmd) {
 | |
|     case WM8750_LADCIN:	/* ADC Signal Path Control (Left) */
 | |
|         s->diff[0] = (((value >> 6) & 3) == 3);	/* LINSEL */
 | |
|         if (s->diff[0])
 | |
|             s->in[0] = &s->adc_voice[0 + s->ds * 1];
 | |
|         else
 | |
|             s->in[0] = &s->adc_voice[((value >> 6) & 3) * 1 + 0];
 | |
|         break;
 | |
| 
 | |
|     case WM8750_RADCIN:	/* ADC Signal Path Control (Right) */
 | |
|         s->diff[1] = (((value >> 6) & 3) == 3);	/* RINSEL */
 | |
|         if (s->diff[1])
 | |
|             s->in[1] = &s->adc_voice[0 + s->ds * 1];
 | |
|         else
 | |
|             s->in[1] = &s->adc_voice[((value >> 6) & 3) * 1 + 0];
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ADCIN:	/* ADC Input Mode */
 | |
|         s->ds = (value >> 8) & 1;	/* DS */
 | |
|         if (s->diff[0])
 | |
|             s->in[0] = &s->adc_voice[0 + s->ds * 1];
 | |
|         if (s->diff[1])
 | |
|             s->in[1] = &s->adc_voice[0 + s->ds * 1];
 | |
|         s->monomix[0] = (value >> 6) & 3;	/* MONOMIX */
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ADCTL1:	/* Additional Control (1) */
 | |
|         s->monomix[1] = (value >> 1) & 1;	/* DMONOMIX */
 | |
|         break;
 | |
| 
 | |
|     case WM8750_PWR1:	/* Power Management (1) */
 | |
|         s->enable = ((value >> 6) & 7) == 3;	/* VMIDSEL, VREF */
 | |
|         wm8750_set_format(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_LINVOL:	/* Left Channel PGA */
 | |
|         s->invol[0] = value & 0x3f;		/* LINVOL */
 | |
|         s->inmute[0] = (value >> 7) & 1;	/* LINMUTE */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_RINVOL:	/* Right Channel PGA */
 | |
|         s->invol[1] = value & 0x3f;		/* RINVOL */
 | |
|         s->inmute[1] = (value >> 7) & 1;	/* RINMUTE */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ADCDAC:	/* ADC and DAC Control */
 | |
|         s->pol = (value >> 5) & 3;		/* ADCPOL */
 | |
|         s->mute = (value >> 3) & 1;		/* DACMU */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ADCTL3:	/* Additional Control (3) */
 | |
|         break;
 | |
| 
 | |
|     case WM8750_LADC:	/* Left ADC Digital Volume */
 | |
|         s->invol[2] = value & 0xff;		/* LADCVOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_RADC:	/* Right ADC Digital Volume */
 | |
|         s->invol[3] = value & 0xff;		/* RADCVOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ALC1:	/* ALC Control (1) */
 | |
|         s->alc = (value >> 7) & 3;		/* ALCSEL */
 | |
|         break;
 | |
| 
 | |
|     case WM8750_NGATE:	/* Noise Gate Control */
 | |
|     case WM8750_3D:	/* 3D enhance */
 | |
|         break;
 | |
| 
 | |
|     case WM8750_LDAC:	/* Left Channel Digital Volume */
 | |
|         s->outvol[0] = value & 0xff;		/* LDACVOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_RDAC:	/* Right Channel Digital Volume */
 | |
|         s->outvol[1] = value & 0xff;		/* RDACVOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_BASS:	/* Bass Control */
 | |
|         break;
 | |
| 
 | |
|     case WM8750_LOUTM1:	/* Left Mixer Control (1) */
 | |
|         s->path[0] = (value >> 8) & 1;		/* LD2LO */
 | |
|         /* TODO: mute/unmute respective paths */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_LOUTM2:	/* Left Mixer Control (2) */
 | |
|         s->path[1] = (value >> 8) & 1;		/* RD2LO */
 | |
|         /* TODO: mute/unmute respective paths */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ROUTM1:	/* Right Mixer Control (1) */
 | |
|         s->path[2] = (value >> 8) & 1;		/* LD2RO */
 | |
|         /* TODO: mute/unmute respective paths */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ROUTM2:	/* Right Mixer Control (2) */
 | |
|         s->path[3] = (value >> 8) & 1;		/* RD2RO */
 | |
|         /* TODO: mute/unmute respective paths */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_MOUTM1:	/* Mono Mixer Control (1) */
 | |
|         s->mpath[0] = (value >> 8) & 1;		/* LD2MO */
 | |
|         /* TODO: mute/unmute respective paths */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_MOUTM2:	/* Mono Mixer Control (2) */
 | |
|         s->mpath[1] = (value >> 8) & 1;		/* RD2MO */
 | |
|         /* TODO: mute/unmute respective paths */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_LOUT1V:	/* LOUT1 Volume */
 | |
|         s->outvol[2] = value & 0x7f;		/* LOUT1VOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_LOUT2V:	/* LOUT2 Volume */
 | |
|         s->outvol[4] = value & 0x7f;		/* LOUT2VOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ROUT1V:	/* ROUT1 Volume */
 | |
|         s->outvol[3] = value & 0x7f;		/* ROUT1VOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ROUT2V:	/* ROUT2 Volume */
 | |
|         s->outvol[5] = value & 0x7f;		/* ROUT2VOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_MOUTV:	/* MONOOUT Volume */
 | |
|         s->outvol[6] = value & 0x7f;		/* MONOOUTVOL */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_ADCTL2:	/* Additional Control (2) */
 | |
|         break;
 | |
| 
 | |
|     case WM8750_PWR2:	/* Power Management (2) */
 | |
|         s->power = value & 0x7e;
 | |
|         /* TODO: mute/unmute respective paths */
 | |
|         wm8750_vol_update(s);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_IFACE:	/* Digital Audio Interface Format */
 | |
|         s->format = value;
 | |
|         s->master = (value >> 6) & 1;			/* MS */
 | |
|         wm8750_clk_update(s, s->master);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_SRATE:	/* Clocking and Sample Rate Control */
 | |
|         s->rate = &wm_rate_table[(value >> 1) & 0x1f];
 | |
|         wm8750_clk_update(s, 0);
 | |
|         break;
 | |
| 
 | |
|     case WM8750_RESET:	/* Reset */
 | |
|         wm8750_reset(&s->i2c);
 | |
|         break;
 | |
| 
 | |
| #ifdef VERBOSE
 | |
|     default:
 | |
|         printf("%s: unknown register %02x\n", __FUNCTION__, cmd);
 | |
| #endif
 | |
|     }
 | |
| 
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| static int wm8750_rx(i2c_slave *i2c)
 | |
| {
 | |
|     return 0x00;
 | |
| }
 | |
| 
 | |
| static void wm8750_pre_save(void *opaque)
 | |
| {
 | |
|     WM8750State *s = opaque;
 | |
| 
 | |
|     s->rate_vmstate = (s->rate - wm_rate_table) / sizeof(*s->rate);
 | |
| }
 | |
| 
 | |
| static int wm8750_post_load(void *opaque, int version_id)
 | |
| {
 | |
|     WM8750State *s = opaque;
 | |
| 
 | |
|     s->rate = &wm_rate_table[s->rate_vmstate & 0x1f];
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| static const VMStateDescription vmstate_wm8750 = {
 | |
|     .name = CODEC,
 | |
|     .version_id = 0,
 | |
|     .minimum_version_id = 0,
 | |
|     .minimum_version_id_old = 0,
 | |
|     .pre_save = wm8750_pre_save,
 | |
|     .post_load = wm8750_post_load,
 | |
|     .fields      = (VMStateField []) {
 | |
|         VMSTATE_UINT8_ARRAY(i2c_data, WM8750State, 2),
 | |
|         VMSTATE_INT32(i2c_len, WM8750State),
 | |
|         VMSTATE_INT32(enable, WM8750State),
 | |
|         VMSTATE_INT32(idx_in, WM8750State),
 | |
|         VMSTATE_INT32(req_in, WM8750State),
 | |
|         VMSTATE_INT32(idx_out, WM8750State),
 | |
|         VMSTATE_INT32(req_out, WM8750State),
 | |
|         VMSTATE_UINT8_ARRAY(outvol, WM8750State, 7),
 | |
|         VMSTATE_UINT8_ARRAY(outmute, WM8750State, 2),
 | |
|         VMSTATE_UINT8_ARRAY(invol, WM8750State, 4),
 | |
|         VMSTATE_UINT8_ARRAY(inmute, WM8750State, 2),
 | |
|         VMSTATE_UINT8_ARRAY(diff, WM8750State, 2),
 | |
|         VMSTATE_UINT8(pol, WM8750State),
 | |
|         VMSTATE_UINT8(ds, WM8750State),
 | |
|         VMSTATE_UINT8_ARRAY(monomix, WM8750State, 2),
 | |
|         VMSTATE_UINT8(alc, WM8750State),
 | |
|         VMSTATE_UINT8(mute, WM8750State),
 | |
|         VMSTATE_UINT8_ARRAY(path, WM8750State, 4),
 | |
|         VMSTATE_UINT8_ARRAY(mpath, WM8750State, 2),
 | |
|         VMSTATE_UINT8(format, WM8750State),
 | |
|         VMSTATE_UINT8(power, WM8750State),
 | |
|         VMSTATE_UINT8(rate_vmstate, WM8750State),
 | |
|         VMSTATE_I2C_SLAVE(i2c, WM8750State),
 | |
|         VMSTATE_END_OF_LIST()
 | |
|     }
 | |
| };
 | |
| 
 | |
| static int wm8750_init(i2c_slave *i2c)
 | |
| {
 | |
|     WM8750State *s = FROM_I2C_SLAVE(WM8750State, i2c);
 | |
| 
 | |
|     AUD_register_card(CODEC, &s->card);
 | |
|     wm8750_reset(&s->i2c);
 | |
| 
 | |
|     vmstate_register(-1, &vmstate_wm8750, s);
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| #if 0
 | |
| static void wm8750_fini(i2c_slave *i2c)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) i2c;
 | |
|     wm8750_reset(&s->i2c);
 | |
|     AUD_remove_card(&s->card);
 | |
|     qemu_free(s);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| void wm8750_data_req_set(DeviceState *dev,
 | |
|                 void (*data_req)(void *, int, int), void *opaque)
 | |
| {
 | |
|     WM8750State *s = FROM_I2C_SLAVE(WM8750State, I2C_SLAVE_FROM_QDEV(dev));
 | |
|     s->data_req = data_req;
 | |
|     s->opaque = opaque;
 | |
| }
 | |
| 
 | |
| void wm8750_dac_dat(void *opaque, uint32_t sample)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) opaque;
 | |
| 
 | |
|     *(uint32_t *) &s->data_out[s->idx_out] = sample;
 | |
|     s->req_out -= 4;
 | |
|     s->idx_out += 4;
 | |
|     if (s->idx_out >= sizeof(s->data_out) || s->req_out <= 0)
 | |
|         wm8750_out_flush(s);
 | |
| }
 | |
| 
 | |
| void *wm8750_dac_buffer(void *opaque, int samples)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) opaque;
 | |
|     /* XXX: Should check if there are <i>samples</i> free samples available */
 | |
|     void *ret = s->data_out + s->idx_out;
 | |
| 
 | |
|     s->idx_out += samples << 2;
 | |
|     s->req_out -= samples << 2;
 | |
|     return ret;
 | |
| }
 | |
| 
 | |
| void wm8750_dac_commit(void *opaque)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) opaque;
 | |
| 
 | |
|     wm8750_out_flush(s);
 | |
| }
 | |
| 
 | |
| uint32_t wm8750_adc_dat(void *opaque)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) opaque;
 | |
|     uint32_t *data;
 | |
| 
 | |
|     if (s->idx_in >= sizeof(s->data_in))
 | |
|         wm8750_in_load(s);
 | |
| 
 | |
|     data = (uint32_t *) &s->data_in[s->idx_in];
 | |
|     s->req_in -= 4;
 | |
|     s->idx_in += 4;
 | |
|     return *data;
 | |
| }
 | |
| 
 | |
| void wm8750_set_bclk_in(void *opaque, int new_hz)
 | |
| {
 | |
|     WM8750State *s = (WM8750State *) opaque;
 | |
| 
 | |
|     s->ext_adc_hz = new_hz;
 | |
|     s->ext_dac_hz = new_hz;
 | |
|     wm8750_clk_update(s, 1);
 | |
| }
 | |
| 
 | |
| static I2CSlaveInfo wm8750_info = {
 | |
|     .qdev.name = "wm8750",
 | |
|     .qdev.size = sizeof(WM8750State),
 | |
|     .init = wm8750_init,
 | |
|     .event = wm8750_event,
 | |
|     .recv = wm8750_rx,
 | |
|     .send = wm8750_tx
 | |
| };
 | |
| 
 | |
| static void wm8750_register_devices(void)
 | |
| {
 | |
|     i2c_register_slave(&wm8750_info);
 | |
| }
 | |
| 
 | |
| device_init(wm8750_register_devices)
 |