/** ****************************************************************************** * @file bsp_driver_sd.h (based on stm324x9i_eval_sd.h) * @brief This file contains the common defines and functions prototypes for * the bsp_driver_sd.c driver. ****************************************************************************** * * Copyright (c) 2017 STMicroelectronics International N.V. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted, provided that the following conditions are met: * * 1. Redistribution of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of other * contributors to this software may be used to endorse or promote products * derived from this software without specific written permission. * 4. This software, including modifications and/or derivative works of this * software, must execute solely and exclusively on microcontroller or * microprocessor devices manufactured by or for STMicroelectronics. * 5. Redistribution and use of this software other than as permitted under * this license is void and will automatically terminate your rights under * this license. * * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4XX_SD_H #define __STM32F4XX_SD_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /* Exported constants --------------------------------------------------------*/ /** * @brief SD Card information structure */ #ifndef BSP_SD_CardInfo #define BSP_SD_CardInfo HAL_SD_CardInfoTypeDef #endif /** * @brief SD status structure definition */ #define MSD_OK ((uint8_t)0x00) #define MSD_ERROR ((uint8_t)0x01) /** * @brief SD transfer state definition */ #define SD_TRANSFER_OK ((uint8_t)0x00) #define SD_TRANSFER_BUSY ((uint8_t)0x01) /** @defgroup STM324x9I_EVAL_SD_Exported_Constants STM324x9I EVAL SD Exported Constants * @{ */ #define SD_PRESENT ((uint8_t)0x01) #define SD_NOT_PRESENT ((uint8_t)0x00) #define SD_DATATIMEOUT ((uint32_t)100000000) /* USER CODE BEGIN 0 */ /* DMA definitions for SD DMA transfer */ /* #define __DMAx_TxRx_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE #define SD_DMAx_Tx_CHANNEL DMA_CHANNEL_4 #define SD_DMAx_Rx_CHANNEL DMA_CHANNEL_4 #define SD_DMAx_Tx_STREAM DMA2_Stream6 #define SD_DMAx_Rx_STREAM DMA2_Stream3 #define SD_DMAx_Tx_IRQn DMA2_Stream6_IRQn #define SD_DMAx_Rx_IRQn DMA2_Stream3_IRQn #define SD_DMAx_Tx_IRQHandler DMA2_Stream6_IRQHandler #define SD_DMAx_Rx_IRQHandler DMA2_Stream3_IRQHandler #define SD_DetectIRQHandler() HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_8) */ /* Exported functions --------------------------------------------------------*/ uint8_t BSP_SD_Init(void); uint8_t BSP_SD_ITConfig(void); void BSP_SD_DetectIT(void); void BSP_SD_DetectCallback(void); uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout); uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout); uint8_t BSP_SD_ReadBlocks_DMA(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks); uint8_t BSP_SD_WriteBlocks_DMA(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks); uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr); void BSP_SD_IRQHandler(void); void BSP_SD_DMA_Tx_IRQHandler(void); void BSP_SD_DMA_Rx_IRQHandler(void); uint8_t BSP_SD_GetCardState(void); void BSP_SD_GetCardInfo(BSP_SD_CardInfo *CardInfo); uint8_t BSP_SD_IsDetected(void); /* USER CODE END 0 */ #ifdef __cplusplus } #endif #endif /* __STM32F4XX_SD_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/